Stripper clips for .308???

ARshooter · December 23, 2002, 05:47 PM

This may seem like a dumb question but are there stripper clips made for the .308 case? I have never seen them.

If they do exist, where might I find them?

Thanks

moredes · December 23, 2002, 07:42 PM

Yes, though not "specifically" for .308, (there are USGI for .30 cal that are interchangeable for feeding magazines for the M1 and M1A) and there are different types that work for anything close to 7.62 x XXX or .30 cal/.308 for the M1/M1A; FAL, SKS, AK47, and another rifle, but mind is dead blank now.

http://search.ebay.com/search/search...1&BasicSearch=

AK103K · December 24, 2002, 07:23 AM

Mauser 8mm strippers will also work with guns converted to 308 on a Mauser action.

Jim V · December 24, 2002, 10:28 AM

I have a couple of bags full of USGI M-14 stripper clips. Also a bunch of 8m/m stripper clips. Both work well with the mag loader for the FAL mags. And with the '98 Mauser that has been rebarrreled to 7.62X51.

Where to get them? It seems to me that CTD offered/offers them.

moredes · December 24, 2002, 12:31 PM

Thank god! I was goin' nuts tryin' to remember the caliber--8mm. I don't own one, so I only know how the clip was identified by other shooters.

Thanks guys.

JackDRipper · May 21, 2004, 11:39 PM

CJ Weapons has 5 and 10 round 308 stripper clips and a loader.
JR
http://www.cjweapons.com/aspcart45/d...ge=300&start=1

makarov man · May 22, 2004, 01:02 PM

www.tapco.com sells them. They are the Chinese ones. They work ok! If you want the good ones get the Aussie F4 308 ammo in bandoleers. 50 rounds per bandoleer. Those really work well!

walterj61550 · July 8, 2004, 08:26 PM

try this web site he has everything:

www.ar15mags.com

December 23, 2002, 05:47 PM	#1
ARshooter Senior Member Join Date: June 4, 1999 Posts: 142	Stripper clips for .308??? This may seem like a dumb question but are there stripper clips made for the .308 case? I have never seen them. If they do exist, where might I find them? Thanks __________________ NRA Life Member SAF CRPA VHA NHRA

December 24, 2002, 10:28 AM	#4
Jim V Senior Member Join Date: January 31, 1999 Location: SE Michigan - USA Posts: 4,038	I have a couple of bags full of USGI M-14 stripper clips. Also a bunch of 8m/m stripper clips. Both work well with the mag loader for the FAL mags. And with the '98 Mauser that has been rebarrreled to 7.62X51. Where to get them? It seems to me that CTD offered/offers them. __________________ *MOLON LABE* If it ain't metal, single stack & single action, it ain't a 1911 no matter what it looks like. 1911 Forum THE TUBBY CURMUDGEON

July 8, 2004, 08:26 PM	#8
walterj61550 Junior Member Join Date: June 21, 2004 Posts: 1	308 clips try this web site he has everything: www.ar15mags.com

December 23, 2002, 07:42 PM	#2
moredes Senior Member Join Date: September 7, 2001 Posts: 325	Yes, though not "specifically" for .308, (there are USGI for .30 cal that are interchangeable for feeding magazines for the M1 and M1A) and there are different types that work for anything close to 7.62 x XXX or .30 cal/.308 for the M1/M1A; FAL, SKS, AK47, and another rifle, but mind is dead blank now. http://search.ebay.com/search/search...1&BasicSearch=

December 24, 2002, 07:23 AM	#3
AK103K Senior Member Join Date: May 1, 2001 Posts: 10,223	Mauser 8mm strippers will also work with guns converted to 308 on a Mauser action.

December 24, 2002, 12:31 PM	#5
moredes Senior Member Join Date: September 7, 2001 Posts: 325	Thank god! I was goin' nuts tryin' to remember the caliber--8mm. I don't own one, so I only know how the clip was identified by other shooters. Thanks guys.

May 21, 2004, 11:39 PM	#6
JackDRipper Member Join Date: March 25, 2002 Location: Utah Posts: 90	CJ Weapons has 5 and 10 round 308 stripper clips and a loader. JR http://www.cjweapons.com/aspcart45/d...ge=300&start=1

May 22, 2004, 01:02 PM	#7
makarov man Member Join Date: May 19, 2004 Location: PA Posts: 48	www.tapco.com sells them. They are the Chinese ones. They work ok! If you want the good ones get the Aussie F4 308 ammo in bandoleers. 50 rounds per bandoleer. Those really work well!