|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
March 24, 2009, 06:05 PM | #1 |
Junior member
Join Date: January 3, 2006
Location: Indpls
Posts: 1,159
|
personal protection only, no target shooting.
Would someone benefit having adjustable sights vs fixed on a handgun if they only carried for personal protection and didn't shoot at targets very often?
I'm asking cuz its a $30 upgrade to get adjustable and I'm not sure if I even need them. |
March 24, 2009, 06:13 PM | #2 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
First, you should know if your gun is sighted in to put the bullets at the point of aim at SD distances. If so, there is no need for adjustable sights.
Also, prominent adjustable sights on a carry gun can snag on clothing when drawing. In general, I would advise keeping a carry gun as "clean" as possible and buying another gun if you want to target shoot (beyond that necessary to attain skill with the SD gun). Jim |
March 24, 2009, 06:16 PM | #3 |
Member
Join Date: April 9, 2002
Location: Northern Virginia
Posts: 35
|
I personally wouldn't bother. I have a real hard time imagining any situation where I'd need to defend myself with a handgun beyond about 10 or 15 yards, and in my limited experience, I've never run across a handgun that was noticeably off at those ranges.
__________________
For what avail the plough or sail, or land or life, if freedom fail? ~Ralph Waldo Emerson |
March 24, 2009, 06:21 PM | #4 |
Member
Join Date: February 28, 2009
Posts: 23
|
Save $30
Accurate fixed sights are fine for SD since you shouldn't have to adjust for distance/windage in the immediate occurance when needed.
Practice at/or less than 7 yards. Very rarely are you gonna be able to "aim" at an immediate threat as it bears down on you. |
March 24, 2009, 06:23 PM | #5 |
Senior Member
Join Date: August 20, 2005
Location: Bellevue, WA
Posts: 683
|
Oh lord, let's not make this another point shooting vs. aimed shooting thread.
A pragmatic reason to not put adjustable sights on your gun is that the most popular style, the Bo-mar style sights have some pretty sharp edges. What that can mean to you is that if you have to do a tap/rack drill or any kind of malf clearance, you stand a decent chance of tearing chunks out of your hand.
__________________
Join the community at GunUp! |
March 24, 2009, 06:27 PM | #6 |
Moderator Emeritus
Join Date: June 25, 2008
Location: Austin, CO
Posts: 19,578
|
Considering that SD shootings happen at ridiculously close ranges (like 7 feet), the sights are for reference (at best), don't bother with adjustables.
__________________
Nobody plans to screw up their lives... ...they just don't plan not to. -Andy Stanley |
March 25, 2009, 08:02 AM | #7 |
Junior member
Join Date: January 3, 2006
Location: Indpls
Posts: 1,159
|
thanx, appreciate the answers.
|
March 25, 2009, 08:11 AM | #8 |
Senior Member
Join Date: June 3, 2008
Location: Pennsylvania, USA
Posts: 1,269
|
Agreed. Adjustable sights just aren't nessicary on a SD carry gun, IMO.
|
March 26, 2009, 08:59 PM | #9 |
Senior Member
Join Date: December 24, 1999
Location: America
Posts: 3,479
|
Another "no" answer.
__________________
Meriam Webster's: Main Entry: ci·vil·ian Pronunciation: \sə-ˈvil-yən also -ˈvi-yən\, Function: noun, Date: 14th century, 1: a specialist in Roman or modern civil law, 2 a: one not on active duty in the armed services or not on a police or firefighting force b: outsider 1, — civilian adjective |
March 27, 2009, 06:09 PM | #10 |
Member
Join Date: March 5, 2009
Posts: 33
|
Adjustable sights are not necesary or even desirable to me in a strictly carry weapon. However a good set of night sights are a must.
|
March 27, 2009, 07:58 PM | #11 |
Senior Member
Join Date: October 31, 2000
Location: Texican!
Posts: 4,453
|
indycolts,
There are adjustable sights and there are adjustable sights. Some are quite delicate. Others are very sturdy (Bo-Mar come to mind as for very sturdy ones.) Other sights are simi-adjustable. These you can get front sights of various hights and the rear sight is driftable. They even make tools just to drift them. Totaly fixed sights, like on a Smith M10, are tough to sight in if they are off. Others, like Colt NM rear sights, would not take a hard knock if you dropped them (and Colt 1911 National Match front sights fly off alot!) I find Smith & Wesson revolver sights half way. A bit delicate, but work well 99 percent of the time. Bo-Mar are always good. Millets are ok. MMC look good but I have no experience with them. Hinnie and Novak sights are always good (but usually simi-fixed.) Now for a combat pistol if I use adjustable sights, I'd get a file and round off the edges (especially Smith&Wesson, Bo-Mar, and Millet ones.) That would do. Otherwise I'd get simi-adjustable ones like Novak rear sights and a front sight you can change the blade hight (and I prefer dovetailed front sights and Glock style front sight arragements.)
__________________
“To you who call yourselves ‘men of peace,’ I say, you are not safe without men of action by your side” Thucydides |
March 27, 2009, 08:23 PM | #12 |
Junior member
Join Date: September 19, 2005
Posts: 146
|
Need Adjustable-sights?
Sorta depends on the shooter, the weapon, and the resale value of the weapon. I'd guess that most guns are bought and then eventually sold for an upgrade. Ergo, consider the cost of adjustables versus the value at resale. And if you've installed nitesights they could be the adj. type at a very small added investment. Might also be swappable to your new piece if in the same manufacturer line.
|
March 27, 2009, 08:23 PM | #13 |
Senior Member
Join Date: November 5, 2008
Location: Arkansas
Posts: 722
|
A big visible front sight is what I like on a SD gun. Windage and elevation are inconsequential at <10 yards.
|
March 27, 2009, 10:49 PM | #14 |
Member
Join Date: January 24, 2008
Posts: 70
|
Adjustable sights are for beyond 25 yards. I use them at 50-100 yards.
|
March 28, 2009, 12:39 AM | #15 |
Senior Member
Join Date: December 5, 2008
Location: Renton, WA
Posts: 462
|
For SD
Fixed sights vs adjustable sights:
No - as mentioned above it's not a good idea. 1) Snags on clothing 2) can break so not good for a gun you need for SD Sighted versus not. I can simply say come shoot with me and let's shoot at 7-10 yards from concealment and draw and fire at some simple 8 inch steel plates under timed conditions. Let's see how well you can place those shots - hitting the dirt behind the 8 inch steel plates don't count.
__________________
"Shoot Safetly, Shoot Often and Share Your Sport." Jim Scoutten, Shooting USA Check out my new website: www.shootonthemove.org |
|
|