Weaver ring height for TC Omega

mag1911 · September 3, 2012, 04:38 PM

I have an old 1.75X5 Redfield Widefield I'd like to mount on a TC Omega.

Any suggestions about Weaver ring height to clear/cock the hammer? The objective is only about 1.25" so that end should not be a problem.

I already have the Weaver base and don't have much time until ML season starts so need something I can buy locally. Thanks.

Sure Shot Mc Gee · September 4, 2012, 09:46 AM

Being the Omega has a small profile hammer. I would think High rings would work well for your application or you could call Thompson Center and ask for their advice 1-603-332-2333. It's an older number I have given you but it may still work. Otherwise Anywho.com probably has a current listing. T/Cs zip is 03866 there location is Rochester, New Hampshire. Good luck in your up and coming M/L Season also.

mag1911 · September 5, 2012, 05:10 AM

Thanks for the suggestion. I'll be looking for a set of high rings.

September 3, 2012, 04:38 PM	#1
mag1911 Senior Member Join Date: March 3, 2011 Posts: 140	Weaver ring height for TC Omega I have an old 1.75X5 Redfield Widefield I'd like to mount on a TC Omega. Any suggestions about Weaver ring height to clear/cock the hammer? The objective is only about 1.25" so that end should not be a problem. I already have the Weaver base and don't have much time until ML season starts so need something I can buy locally. Thanks.

September 4, 2012, 09:46 AM	#2
Sure Shot Mc Gee Senior Member Join Date: January 2, 2012 Location: Minnesota Posts: 3,876	Being the Omega has a small profile hammer. I would think High rings would work well for your application or you could call Thompson Center and ask for their advice 1-603-332-2333. It's an older number I have given you but it may still work. Otherwise Anywho.com probably has a current listing. T/Cs zip is 03866 there location is Rochester, New Hampshire. Good luck in your up and coming M/L Season also.

September 5, 2012, 05:10 AM	#3
mag1911 Senior Member Join Date: March 3, 2011 Posts: 140	Thanks for the suggestion. I'll be looking for a set of high rings.