December 10, 2013, 08:23 PM | #1 |
Junior Member
Join Date: August 18, 2013
Posts: 5
|
Mossberg 190 Questions
I have a Mossberg 190 kb bolt action 16ga shotgun. It came with what was left of a c-lect- choke when I got it. I was wondering if I can use the regular screw on choke some of these guns came with?
|
December 10, 2013, 09:09 PM | #2 |
Senior Member
Join Date: February 11, 2012
Location: Williamsburg, Va.
Posts: 1,528
|
Nope. Different threads. Best solution would be to cut the old choke off and have tubes threaded, but that would cost more than it's worth.
__________________
What could have happened... did. |
December 11, 2013, 12:11 PM | #3 |
Senior Member
Join Date: September 19, 2008
Posts: 4,678
|
I would first try the Mossberg Collectors Parts Dept: NMCA PO Box 487 Festus, MO 63028 Telephone: (636) 937-6401 Website: www.mossbergcollectors.org Then I would try the PolyChoke Co second, for what you need. http://www.poly-choke.com/ (PolyChoke makes a current version of the C-Lect Ckoke) IMO, your problem is getting parts correct for a 16ga bore (Mossberg discontinued all 16ga guns by 1974). . . |
December 19, 2013, 08:54 PM | #4 |
Junior Member
Join Date: August 18, 2013
Posts: 5
|
thanks for the info I will have to look into those sites. I looked at my gun and the barrel looks different from the ones in the pictures. it doesn't flare at the end like those do.
|
December 21, 2013, 05:36 AM | #5 |
Senior Member
Join Date: February 3, 2013
Posts: 1,235
|
I don't think the flare is the barrel but that is how the c-lect was soldered to the barrel. Does your choke look more like this?
|
Thread Tools | Search this Thread |
|
|