|
February 28, 2007, 11:07 PM
|
#1 |
|
Member
Join Date: February 27, 2007
Posts: 15
|
9mm Loads
Looking for some load ideas for my Browning Hi-Power 9mm. Dont want any boomers, just a nice light load for target and steel plate shooting.
|
|
|
February 28, 2007, 11:28 PM
|
#2 |
|
Senior Member
Join Date: January 7, 2000
Location: Idaho
Posts: 6,073
|
Three loads I have enjoyed.
1. Laser-Cast 115gr. bullet over 5.6gr. Unique, lit by a CCI small pistol primer. 2. Same load, with West Coast plated 115gr. bullet. 3. West Coast 115 gr. plated bullet over 4.5gr. Titegroup, CCI small pistol primer. I shoot these loads in my High-Power. No. 3 is my current favorite.
__________________
I am Pro-Rights (on gun issues). |
|
|
|
March 1, 2007, 07:54 AM
|
#3 |
|
Senior Member
Join Date: November 20, 2006
Posts: 102
|
125 gr cast over 3.3 gr Bullseye CCI primer
|
|
|
|
March 15, 2007, 09:30 AM
|
#4 |
|
Member
Join Date: February 19, 2006
Location: MO
Posts: 49
|
Wwc 115
Howdy,
This is a practice load I use. It is a little different. I have a surplus of WWC small rifle primers from the old "IPSC Major" .38 super days. I load 5.2 of Unique and a WWC small rifle primer in mixed 9mm brass and a WWC 115 jacketed bullet. This is a mild load that shoots to the sights out of my FNP and is very accurate. It runs the gun and has never malfuntioned. I have no idea why, but it has superior accuracy to the same load with small pistol primers. Good luck Mike |
|
|
 |
|
|
