|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
January 13, 2005, 11:13 PM | #1 |
Senior Member
Join Date: December 14, 2001
Location: Vermont
Posts: 101
|
Does anyone make an 870 mag tube ext clamp with a sling attachment point?
I want to put a sling on my 870 without stressing the mag tube cap. So I am looking for a clamp that would put the sling load on the barrel.
|
January 13, 2005, 11:36 PM | #2 |
Senior Member
Join Date: November 20, 2000
Location: Ohio
Posts: 3,968
|
Choate Machine & Tool, Inc.
Sling Swivel Base Clamp Kit
__________________
You know the rest. In the books you have read How the British Regulars fired and fled, How the farmers gave them ball for ball, From behind each fence and farmyard wall, Chasing the redcoats down the lane, Then crossing the fields to emerge again Under the trees at the turn of the road, And only pausing to fire and load. |
January 14, 2005, 12:08 AM | #3 |
Senior Member
Join Date: December 14, 2001
Location: Vermont
Posts: 101
|
444
Thanks for the info but, I am looking for a bottom sling swivel mount if such exists. |
January 14, 2005, 05:53 AM | #4 |
Senior Member
Join Date: December 14, 2004
Location: Northern Indiana
Posts: 6,117
|
You can contact CHOATE and ask,
They are a very good company, at one time the sent me to another company becouse they diddnt have what I was looking for. They might be able to help.
http://www.uws.com/CHOATE/HomePage.html |
January 14, 2005, 09:10 AM | #5 |
Senior Member
Join Date: January 6, 2000
Location: SE PA
Posts: 1,049
|
The Factory?
__________________
"Freedom is not free" Visit TheRallyPoint.org TheRallyPoint at LRGC- Saturday August 26th IF YOU LIVE IN PA AND DID NOT VOTE, YOU DESERVE TO LOSE YOUR GUNS! |
January 14, 2005, 11:22 AM | #6 |
Senior Member
Join Date: June 25, 2002
Location: Lost Angeles
Posts: 781
|
The best two I have seen are the Vang and Wilson.
The Vang part can be used swaped right or left handed, but not down. The Wilson part has to be ordered right, left, or down. Both come in 1 or 2 round configuration.
__________________
Jeff The reason we're all here is that we're not all there. |
January 14, 2005, 04:27 PM | #7 |
Senior Member
Join Date: December 14, 2001
Location: Vermont
Posts: 101
|
Thanks for the feedback guys. I think I am going to use the Wilson +1 QD extension. It is long enough to add a regular mag extension tube clamp. That should keep the sling from prying on the end of the mag tube. Not a cheap solution however.
|
|
|