December 3, 2011, 05:08 PM | #1 |
Member
Join Date: November 24, 2011
Location: Canton, Ohio
Posts: 18
|
rifle cleaning .22
I just read you shouldn't clen a rifle barrell from the muzzle I have been doing this and have cleaned my rifle like this about 5 times is my barrel ruined and should I start cleaning from the breech
|
December 3, 2011, 05:12 PM | #2 |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
|
I seriously doubt you have ruined your barrel after cleaning from the muzzle end 5 times. Just start cleaning from the breech end.
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
December 3, 2011, 05:14 PM | #3 |
Junior member
Join Date: July 24, 2011
Location: Saint Louis, Missouri
Posts: 849
|
The M1 Garand is cleaned from the muzzle to the chamber.
You can also consider a "pull through" system, such as Otis sells if you are uncomfortable cleaning muzzle to chamber. |
December 3, 2011, 07:48 PM | #4 |
Senior Member
Join Date: January 24, 2011
Location: Arizona
Posts: 214
|
The .22 isn't all that picky about having a clean bore anyway. I only clean my .22 bores about once a year and that is after thousands of rounds have gone through. I have never seen an accuracy drop off.
|
December 3, 2011, 08:04 PM | #5 |
Member
Join Date: November 24, 2011
Location: Canton, Ohio
Posts: 18
|
why
I just wonered why the bore is hurt when you clean from the muzzle to me it seems the same
|
December 3, 2011, 08:26 PM | #6 |
Senior Member
Join Date: May 28, 2001
Location: Timbuktu
Posts: 229
|
I believe it's more of a risk to damage the crown with the rod when cleaned from the muzzle. I use a Otis kit, bore snake or patchworm to clean my rifles. All of those are safe for the bore/crown and easy to use.
|
December 3, 2011, 08:43 PM | #7 |
Senior Member
Join Date: August 20, 2002
Posts: 2,108
|
I have a bore guide that fits on the end of barrel for my 10/22 keeps crown safe....
|
December 3, 2011, 09:46 PM | #8 |
Senior Member
Join Date: March 12, 2010
Posts: 1,860
|
I clean my mini-14 from the muzzle when I dont use my bore snake. As long as your careful you will be fine.
|
December 3, 2011, 09:50 PM | #9 | |
Junior member
Join Date: October 4, 2007
Location: All the way to NEBRASKA
Posts: 8,722
|
Quote:
|
|
December 3, 2011, 10:00 PM | #10 |
Senior Member
Join Date: February 9, 2011
Location: Central KY
Posts: 552
|
Definitely clean from the breech end when you can for the afore mentioned reasons. Nicking the crown is the biggest concern; it's the last surface the bullet touches before leaving the barrel, thus the most likely goof in the barrel to have an effect on accuracy. I have a few that just can't be cleaned this way, namely the Marlin 60. I just gingerly get the jag or brush started and make sure the end of the rod doesn't gouge it. I also use a fiberglass coated cleaning rod.
I guess the best thing I've done recently regarding cleaning is picking up a can of Wipe-Out. Foaming bore cleaner, it dissolves all that crap and makes multiple trips up and down the bore less frequent. There are numerous others that do the same thing, but that's what my local store has and it works. Don't sweat it too much.
__________________
~Mark NRA Endowment FTW |
December 3, 2011, 10:22 PM | #11 |
Junior member
Join Date: October 4, 2007
Location: All the way to NEBRASKA
Posts: 8,722
|
There are muzzle protectors (I have a brass "one size fits most" model) for guns like the model 60 ...... and I have a couple of Commie Milsurps that included a muzzle protector in the cleaning kit........
|
Tags |
.22 , cleaning |
|
|