|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
November 20, 2002, 01:55 PM | #1 |
Registration in progress
Join Date: May 30, 2000
Posts: 64
|
Seeking advice for disassembling bolt on my "new" Mauser 98K
I recently purchased a JP Sauer & Son Mauser 98K made in 1934. Any advice on the easiest way to disassemble the bolt for cleaning would be appreciated. I know the “donut” in the stock is to assist in this endeavor but that is about the extent of my knowledge. Also, once apart and cleaned, what is the recommended procedure for lube? Is the firing pin channel supposed to be dry? Any advice would be greatly appreciated. Thanks! Art G.
|
November 20, 2002, 04:32 PM | #2 |
Senior Member
Join Date: May 4, 2001
Posts: 7,478
|
Try these two sites, they have M98 Mauser manuals.
http://www.biggerhammer.net/manuals/ http://www.surplusrifle.com/downloads.asp The inside of the bolt should have a light coat of good gun grease on all parts. |
November 20, 2002, 11:20 PM | #3 |
Junior Member
Join Date: November 19, 2002
Location: usa
Posts: 2
|
Mauser bolt assembly
http://www.bobtuley.com/mauser/
Hi here is a web page that deals with bolts on Mausers. Enjoy your new rifle. |
November 21, 2002, 08:55 AM | #4 |
Registration in progress
Join Date: May 30, 2000
Posts: 64
|
Gentlemen: Thank you for the excellent information. I appreciate it! Art G.
|
|
|