August 7, 2011, 07:51 AM | #1 |
Junior Member
Join Date: August 7, 2011
Posts: 10
|
Shotshell reloads
I am looking at reloading some shotshells for my 45 Colt and 38 revolvers. I think they would be great for hiking and to take along while fishing. Snakes and all. Maybe even hand thrown clay pigeons at close range.
Does anyone have any experience or reloading info on these? Is it easier to use the plastic capsules or could I use a gas check at the top and bottom of the shot column? Or even a card wad from a milk carton or the like? What size shot would be the best? Any info would be helpful. Is it even worth the fuss? |
August 7, 2011, 08:56 AM | #2 |
Senior Member
Join Date: February 20, 1999
Location: home on the range; Vermont (Caspian country)
Posts: 14,324
|
Use the capsules.
__________________
. "all my ammo is mostly retired factory ammo" |
August 7, 2011, 09:17 AM | #3 |
Senior Member
Join Date: December 22, 2010
Location: SEALY, THE REPUBLIC OF TEXAS
Posts: 501
|
MR. HAWKEYE
About 20 years ago, i purchased the shot-shell components sold by speer & made a strong attempt to load my own. I eventually gave up & began purchasing the speer factory loads in .22lr, .38 / .357, & .44 special / magnum.
Conclusion: The speer factory shot-shell loads are better than my home-brew rounds !!!!! Guru1911
__________________
NRA LIFE MEMBER (1984) & PRESIDENT: S.W. LA. R&P CLUB, LAKE CHARLES, LOUISIANA (1994-1999) METALLIC CARTRIDGE RELOADER (1977) & GENTILE CHRISTIAN ZIONIST INFIDEL !!! "THERE AIN'T TOO MANY THINGS THAT YOU CAN'T FIX, WITH $500 DOLLARS OR A .30-06" |
August 7, 2011, 09:22 AM | #4 |
Junior member
Join Date: April 18, 2008
Location: N. Central Florida
Posts: 8,518
|
The capsules are easy enough - the recipe comes on the box. You'll want to use the smallest shot you can - no larger than #9, 11 or 12 and realize that the effective distance is about 6-9 feet
|
August 7, 2011, 09:31 AM | #5 |
Staff
Join Date: March 20, 1999
Location: Somewhere in the woods of Northern Virginia
Posts: 16,940
|
Moving to the Handloading forum.
I've loaded up the Speer capsules for several different calibers, and they work well. The key is the crimp - don't crimp much at all or you'll crack the capsule. As oneounceload said, use small shot only. |
August 7, 2011, 11:35 AM | #6 |
Junior member
Join Date: November 12, 2000
Location: Colorado Springs, Colorado
Posts: 9,494
|
Mal beat me to it. If you have any problem loading the plastic capsules...it's too much crimp. Do they make the capsules in 45 now? I never seen them but Weshoot implies they do...
|
August 7, 2011, 11:52 AM | #7 |
Staff
Join Date: March 20, 1999
Location: Somewhere in the woods of Northern Virginia
Posts: 16,940
|
Which 45 are you talking about?
I have capsules for .38/.357, .44, and .45 Colt. I don't believe there are capsules for .45 ACP, and the .45 Colt ones would be too long even if used in a 625 for example. |
August 7, 2011, 12:46 PM | #8 |
Member
Join Date: October 16, 2002
Location: Franklin County Missouri
Posts: 84
|
I once built some for my 38 that I liked.
Gas check on top of the powder approx 70 grains of #9 shot Seat a .360" round ball on top.
__________________
Shoot Safe! Shoot Often! |
August 7, 2011, 01:36 PM | #9 | |
Senior Member
Join Date: July 26, 2011
Location: USA
Posts: 1,730
|
Home made or Speer, this holds true
Quote:
|
|
August 9, 2011, 07:20 AM | #10 |
Junior Member
Join Date: August 7, 2011
Posts: 10
|
Thanks for the info.
Sounds like most use the capsules. I think I will try the capsules and also the gas check methods. Question. Do I just use the standard load that I would use for a cast bullet? Or do you go lighter? Will let you know how they turn out. By the way, I am using these in a Ruger SP101 357 and Uberti 45 Colt SAA. |
August 9, 2011, 08:17 AM | #11 |
Senior Member
Join Date: November 22, 1999
Location: Green Country, OK
Posts: 782
|
Here's a good 'how-to' to do it yourself without the expense of the shot capsules. Do it right and it works really good.
http://www.castbullet.com/reload/44shot.htm
__________________
safety first |
August 9, 2011, 08:38 AM | #12 | |
Junior member
Join Date: April 18, 2008
Location: N. Central Florida
Posts: 8,518
|
Quote:
Shows two loads - 5.5 of Unique or 5.0 of SR7625 |
|
August 9, 2011, 09:45 AM | #13 |
Junior member
Join Date: November 12, 2000
Location: Colorado Springs, Colorado
Posts: 9,494
|
I was talking about 45 Colt.
|
August 16, 2011, 09:16 AM | #14 |
Junior Member
Join Date: August 7, 2011
Posts: 10
|
Made up some shot loads for the 45 Colt using the method on this link...
http://www.castbullet.com/reload/44shot.htm They worked very well. Used some very small shot, probably #9 from some old all plastic shotgun shells. Kind of time consuming, but worked real well. I think I will try to locate some #12 shot and make more. Thinking of trying some hand thrown aerial targets. Sounds like fun. Any thoughts? |
Thread Tools | Search this Thread |
|
|