|
February 2, 2013, 09:28 PM
|
#1 |
|
Junior Member
Join Date: August 6, 2010
Posts: 9
|
9 mm recipe question
anybody have recipe for 9mm 115 grian lead round nose using bulleye i have two manuals neither have a recipe thanks
|
|
|
February 2, 2013, 10:01 PM
|
#2 |
|
Senior Member
Join Date: June 6, 1999
Location: El Paso, TX
Posts: 1,021
|
You can use the load for 115gr jacketed bullets which Alliant publishes, which is 4.7gr. Or if you download the Alliant 2004 manual you will see a load published for 125gr Lead, which is 4.9gr. Both these recipes illustrate a reloading principle, first that you can use jacketed data when reloading lead bullets of the same weight and secondly that using load data for a heavier bullet is acceptable for a lighter bullet as well. Perhaps not for H110, but thats a different story.
These loads are max, so if you use them reduce 10% as a starting point.
__________________
New gun, same ol' shot. |
|
|
|
February 3, 2013, 12:08 AM
|
#3 |
|
Senior Member
Join Date: January 25, 2009
Location: Liberty Twp, OH
Posts: 283
|
The powder manufacturer is your friend. See http://www.alliantpowder.com/reloade...rs/index.aspx&
|
|
|
 |
|
|
