December 28, 2013, 09:07 PM | #1 |
Member
Join Date: August 21, 2013
Location: The Appalachian Mountains
Posts: 66
|
Chopped SxS
Im thinking about getting a double barrrel 12ga and turning it in to a pistol. I own plenty of shotguns as it is and just think that the pistol doubles are cool. Recoil is not really an issue with me, i just want to know what excatly i am getting myself into as far as work and fees go. I imagine a smith will have to do the work to the gun and i know you have to get it "restamped" but not sure what excatly that involves. Do i get it restamed before or after it has been cut down, and how do i get it restamped, do i have to send it away or does the gunsmith or what? Also can anyone ballpark a price, (not including the gun). Thanks
__________________
Nothing Exceeds Like Excess |
December 28, 2013, 09:15 PM | #2 |
Senior Member
Join Date: September 19, 2008
Posts: 4,678
|
.
Your question would be more properly posed in our NFA section: http://thefiringline.com/forums/forumdisplay.php?f=4 AFAIK, you need to get the proper permit from BATF, after you acquire the shotgun, but before any modification like you describe, to get the converted gun registered. http://www.guntrustlawyer.com/2009/0...brsbs-wit.html Anyone that does not, can proceed directly to jail, w/o passing "go". . |
December 28, 2013, 09:39 PM | #3 |
Member
Join Date: August 21, 2013
Location: The Appalachian Mountains
Posts: 66
|
I moved the thread
Thanks for the reply, I read what the forms said and am still scratching my head . It said i need to put the length of the barrel on the permit put wouldnt that be up to the smith? (i want it as short as possible). if you do reply to this post please do it on the http://thefiringline.com/forums/forumdisplay.php?f=4
thread. Thanks a bunch
__________________
Nothing Exceeds Like Excess |
Thread Tools | Search this Thread |
|
|