The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools Search this Thread
Old July 6, 2001, 05:50 PM   #1
Frenchy
Senior Member
 
Join Date: February 15, 2000
Location: Mid-Missouri
Posts: 719
Reloading Newby......

You would think that at age 54, I wouldn't be too new at anything, but here it goes.
I would like to try my hand at reloading, and am considering a Lee Anniversary Kit. I don't want to spend a lot of money initially for obvious reasons. This is going to be an experiment to see if I like it. I have messed around with my brother-in-law's setup, and find it enjoyable. Your impressions of the Lee for the beginner! Thanks.
Steve
__________________
...Steve
Charter member/Plank owner of XD Talk. Com
Frenchy is offline  
Old July 6, 2001, 09:27 PM   #2
bfox
Member
 
Join Date: January 8, 2001
Location: Pittsburgh (plum)Pa.
Posts: 95
I have a lee reloader press and one of their hand presses.They both work good but I am only loading
handgun with them.
Try www.midwayusa they have the
anniversary kit for $68.99 and dial calipers
on sale for $19.99 this month.
Good Luck, Have Fun Bill
bfox is offline  
Old July 6, 2001, 11:02 PM   #3
biganimal
Senior Member
 
Join Date: March 5, 2001
Location: south carolina
Posts: 435
the lee kit is the best entry level kit ,dollar for dollar,it tough to beat it. welcome to my obsession and ENJOY !!!
__________________
Other than That, Mrs Lincoln, How was the play?
biganimal is offline  
Old July 7, 2001, 12:52 AM   #4
Frenchy
Senior Member
 
Join Date: February 15, 2000
Location: Mid-Missouri
Posts: 719
Thanks fella's! I realize there may be better systems out there (RCBS, Dillon, etc.), but Lee has been around for awhile, and for a entry level system (and me on a budget), it would seem to be the ticket.
__________________
...Steve
Charter member/Plank owner of XD Talk. Com
Frenchy is offline  
Old July 7, 2001, 02:10 AM   #5
blades67
Senior Member
 
Join Date: April 22, 1999
Location: Chandler, Arizona, USA
Posts: 6,014
Good luck with that Lee kit.
__________________
Guns cause crime like spoons cause Rosie O'Donnell to be fat!

I hunt, therefore I am.
blades67 is offline  
Old July 7, 2001, 08:21 AM   #6
Redneck2
Senior Member
 
Join Date: April 24, 2000
Location: Northern Indiana
Posts: 519
Just another thought...

My local dealer bought a bunch of RCBS close-out stuff, including complete press kits, from a wholesaler. If I remember right, they have Junior, Partner, and Rockchucker kits. They have extremely good prices (considerably better than Midway). Call them at 219-462-4412 or online at www.ihuntishoot.com. Hope it helps. They'll UPS anywhere.
Redneck2 is offline  
Old July 7, 2001, 09:47 AM   #7
Dan Morris
Senior Member
 
Join Date: March 7, 2001
Location: Littleton, Colorado
Posts: 342
Before you jump into the Lee, give the RCBS a serious thought.
It may be a little $$ crunch but I think you will like it much better!
San
Dan Morris is offline  
Old July 7, 2001, 04:59 PM   #8
Monkeyleg
Senior Member
 
Join Date: January 25, 2000
Posts: 4,625
Dan, if you're not sure that you'll stick with reloading, what about buying a used setup? I see tons of used RCBS and Dillon presses at gun shows.

The only reason I mention this is that years ago I had a Lee press and had nothing but problems with it. On the other hand, their quality may have improved since then. But I firmly believe my RCBS Rockchucker will outlive me.

Good luck, and welcome to the powder measurer's club.
Monkeyleg is offline  
Old July 7, 2001, 07:42 PM   #9
Steve Smith
Senior Member
 
Join Date: December 9, 1999
Posts: 4,131
I second Monkeyleg's post. Look for used equipment that doesn't have the Lee name on it. You'll be much happier when you can hand it down to your grandchildren. Look at Ebay.
__________________
Favor the X.


Steve Smith
NRA Life Member
Steve Smith is offline  
Old July 7, 2001, 10:43 PM   #10
biganimal
Senior Member
 
Join Date: March 5, 2001
Location: south carolina
Posts: 435
hey guys ....what is wrong with Lee presses???? I have a couple of lee presses that are older than a lot of you guys !!! I also own a dillion, a rcbs, a lyman , and an old federal. as far as single stage presses go, most are equal. I haven't had a lick of problems with ANY single stage but my dillion has been returned to the factory twice in 3 years!!! but I still use it for my 45's. I use a Lee progressive for my 357's and have loaded over 20,000 rds and the guy I bought it off did over half a million on it !!!

but I will agree that Lee's scale and powder measure pretty much suck but if you are careful and patient they will suffice for a beginner to start with. just my two pennies worth.....
__________________
Other than That, Mrs Lincoln, How was the play?
biganimal is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:23 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.08625 seconds with 10 queries