March 18, 2011, 08:12 AM | #1 |
Senior Member
Join Date: August 8, 2008
Location: Alabama
Posts: 661
|
Motorcycle Holster
I got a fwd on my email showing a nicely tooled leather seat for motorcyles which had holsters on the rear sides and carrying a large SA revolver. The fwd said it was very popular in Arizona. Does anyone have any idea who is making these bike holsters?
|
March 18, 2011, 08:51 AM | #2 |
Senior Member
Join Date: March 12, 2011
Location: Phoenix, Az......now Iowa
Posts: 191
|
Not a 100 percent sure, but my holster maker is Pure Kustoms in AZ and he also does MC leather work.
|
March 18, 2011, 01:36 PM | #3 |
Senior Member
Join Date: August 8, 2008
Location: Alabama
Posts: 661
|
It's Wicked Cactus Leather in El Paso.
|
March 18, 2011, 01:48 PM | #4 |
Senior Member
Join Date: December 1, 2009
Location: Stillwater, OKlahoma
Posts: 8,638
|
Is this the one you are talking about?
It wouldn't be that difficult to make,,,
Any decent saddle-maker could whomp one out. It wouldn't be cheap though,,, I would probably ask $350 to $500 for a stitched version,,, If it was braided like the one in the picture I would add $200 more. Click here please,,, Aarond
__________________
Never ever give an enemy the advantage of a verbal threat. Caje: The coward dies a thousand times, the brave only once. Kirby: That's about all it takes, ain't it? Aarond is good,,, Aarond is wise,,, Always trust Aarond! (most of the time) |
March 18, 2011, 03:49 PM | #5 |
Senior Member
Join Date: August 8, 2008
Location: Alabama
Posts: 661
|
Yes, that's the one I saw on the net. Apparently it works like a paddle holster with a long paddle. After you park the bike you unhook the holster and hang it from your belt.
|
March 18, 2011, 05:30 PM | #6 |
Senior Member
Join Date: October 22, 2010
Location: Albuquerque, NM
Posts: 986
|
Someone mentioned in another thread that you'll likely get a lot of road grime on your firearm. Also, if the strap fails or comes unsnapped, you run the risk of losing your gun out on the road and maybe not even noticing for quite a long time.
Also, the concerns about retention during OC apply here. I haven't been able to come up with a good way to carry on the bike, which is to say, a way that makes me ride without worry. --Wag-
__________________
"Great genius will always encounter fierce opposition from mediocre minds." --Albert Einstein. |
March 18, 2011, 08:59 PM | #7 |
Junior member
Join Date: May 1, 2010
Posts: 5,797
|
Road Rage Special, LE website...
That's a rad design but in my area there would be to many "road ragers" .
I'd put this motorcycle holster in the "things LEOs should look out for" pile. Like the cell phone gun, the ballcap with razors or the truck knob gear shifter made to look like a N frame .44magnum, www.SportsmansGuide.com . There is a real website designed for LE product alerts. I'm not sure of the URL. I will say the tooling & leather work on the rig are fantastic. They could use the chopper on Top Shot or maybe American Chopper. Paul Sr & Paul Jr could duel. Clyde |
March 18, 2011, 10:28 PM | #8 |
Senior Member
Join Date: August 8, 2009
Location: Boca Raton, FL
Posts: 1,902
|
The rig looks great but road grime would be my primary concern. Check out some of the military surplus places that sell replica helicopter pilot holsters. The firearms rides across the front of your chest on your weak side so you can reach into your jacket with your strong side hand and draw to present the firearm. Keeps the firearm out of sight and your jacket offers it protection from the elements.
__________________
45Gunner May the Schwartz Be With You. NRA Instructor NRA Life Member |
March 19, 2011, 02:30 PM | #9 |
Senior Member
Join Date: October 22, 2010
Location: Albuquerque, NM
Posts: 986
|
Part of the problem that arises with carrying on a bike comes with needing to decide which hand you're going to draw with,
IF you are even inclined to draw the gun while on the bike. If you think you might have a reason to draw the gun while riding, you'd have to draw left-handed but you'd have to holster it before coming to a stop in most, but not all, cases. If you're going to be sitting at a stop light, you'll need to draw right-handed and you'd have to reholster before proceeding again. In all cases, can it be done quickly? Carrying two handguns doesn't even solve all of the problems. Guns and bikes are necessarily a good combination, in my opinion. I carry in a tank bag (rarely) or a fanny pack (mostly) with the assumption that I'm never going to attempt to draw the gun while riding. --Wag--
__________________
"Great genius will always encounter fierce opposition from mediocre minds." --Albert Einstein. |
March 19, 2011, 02:33 PM | #10 |
Senior Member
Join Date: March 12, 2011
Location: Phoenix, Az......now Iowa
Posts: 191
|
I think everyones missing the point of that setup.............it just looks bad ass!
|
March 19, 2011, 02:57 PM | #11 |
Senior Member
Join Date: March 23, 2008
Location: Jacksonville, FL
Posts: 2,126
|
Looking bad ass is important to some but being practical is important to most.
|
March 19, 2011, 03:02 PM | #12 |
Senior Member
Join Date: November 3, 2009
Location: Not close enough to the beach
Posts: 1,477
|
Can you really put a motorcycle in a holster? The pix. shown are really neat looking. The only drawback I see is exposing your weapon to the elements, road grime, and prying eyes.
|
March 20, 2011, 03:27 PM | #13 |
Junior Member
Join Date: September 5, 2009
Location: Charleston, SC
Posts: 7
|
Show Bike toys
Guys: What is in teh picture is a show bike. It has a double barreled shotgun for the front frame rails. It was never built to ride.
I say the bike at Bike Week in Myrtle Beach, SC last summer...cute... I use a Miami Vice sholder rig when I ride. I could not see a need to pull my weapon and then worry about having to re-holster in a hurry>>>>>What would be the reason for that as a problem??? In the real world, if you pull it...you better use it... If you use it...why would you have to leave in a hurry??? Just my thoughts. Steve |
March 21, 2011, 02:46 PM | #14 |
Senior Member
Join Date: October 27, 2005
Location: Crescent Iowa
Posts: 2,971
|
Here is how to ride while armed and the EDC rig to use:
http://thefiringline.com/forums/atta...1&d=1300736711 |
March 21, 2011, 10:19 PM | #15 |
Junior member
Join Date: May 1, 2010
Posts: 5,797
|
Nerd out....
Not to stray off the subject or sound like a dork but the "Miami Vice" shoulder rig is called the "Miami Classic".
It's been a popular staple of Galco for many years; www.Galcogunleather.com . I like the newer Miami Classic II with the angled mag holders, . Clyde F ps; FUN FACT: Holster maker Ted Blocker made Det Sgt James "Sonny" Crockett's first shoulder holster. Blocker's Butterfly design was used with Sonny's big D&D Bren 10 10mm pistol. |
March 23, 2011, 08:25 AM | #16 |
Senior Member
Join Date: January 22, 2005
Location: Kentucky
Posts: 3,619
|
"Drawing while on the bike"...?...now there's a plan for success! That said...the rig shown, part of the seat...looks "cool" if that's important...looks like an automatic LEO magnet just to see what's going on...and subjects the gun to road grime. If you want to ride and carry, get a shoulder holster that protects and doesn't flash your piece to every Tom, Dick and Harry on the roads. Rod
__________________
Cherish our flag, honor it, defend it in word and deed, or get the hell out. Our Bill of Rights has been paid for by heros in uniform and shall not be diluted by misguided governmental social experiments. We owe this to our children, anything less is cowardice. USAF FAC, 5th Spl Forces, Vietnam Vet '69-'73. |
Thread Tools | Search this Thread |
|
|