|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
November 18, 2012, 11:15 AM | #26 |
Senior Member
Join Date: January 3, 2008
Location: Central Oregon
Posts: 348
|
Another vote for H414 here. Shot 1/2 inch 100 yd. groups in my Remmy 700 cdl using Nosler 95 gr. Combined Technology boat tail Silver Tips.
|
November 18, 2012, 11:55 AM | #27 |
Senior Member
Join Date: September 16, 2009
Location: I live in the foot of the Green Mountains of Vermont
Posts: 1,602
|
IMR-3031 still works fine in my .243 , it and IMR-4064 and W-760/H414 .
|
November 18, 2012, 06:13 PM | #28 |
Senior Member
Join Date: January 15, 2012
Location: Western New York
Posts: 466
|
MYG30
My friend I would be loading for, HER name is April and she wouldn't really be able to come over and use my press. But she will be helping reload while I'm at her house.
__________________
Lock and load, the zombies (democrats) are coming (to take your guns)! |
November 18, 2012, 10:43 PM | #29 |
Senior Member
Join Date: January 3, 2008
Location: Central Oregon
Posts: 348
|
Just caught the part about the primers and the fact you will be hunting in very cold weather. The Federal 210M primer will be fine as have done very well in the few tests results I have read but you may want to do your load workup with either H4350 or H4895 . These are a very user friendly powders insofar as being insensitive to cold and used by many for their heavier deer hunting loads . These are 2 of Hodgdons " extreme " series powders for the very reason you mentioned. Nice to see you have a lady friend to enjoy both loading and hunting with . Wish more were like that.
|
November 24, 2012, 10:42 PM | #30 |
Member
Join Date: July 20, 2012
Location: Arkansas
Posts: 17
|
My load for my son"s 243 win
win brass and primer 40 gr varget 70 gr nosler bt COL 2625 if I remember right it will cut the same holes. |
November 25, 2012, 03:22 AM | #31 |
Senior Member
Join Date: August 4, 2005
Posts: 2,017
|
Well, I don't shoot .243, but I DO shoot Rem 6mm (virtually the same beast in all ways that would matter to you. H380 is unrivaled--it's the only powder that rifle gets fed. I use it for 1000-meter shooting mainly with 90gr Sierra FMJBT's, but it fires the Speer 105's for hunting at 1/2 MOA all day long on H380 also.
__________________
"Why is is called Common Sense when it seems so few actually possess it?" Guns only have two enemies: Rust and Politicians. |
November 25, 2012, 10:17 AM | #32 |
Senior Member
Join Date: January 15, 2012
Location: Western New York
Posts: 466
|
What primers are you guys using with your reloads? I have a few Federal LR match and magnum match on hand. Because the case is nice and large and this will be a hunting round in the cold North east, magnum primer be safe? I think I will make a Ladder test with IMR4064, Varget, maybe CFE223, and RL22. I have all these powders on hand.
I forgot to mention in the original post, that I will be using 100gr SGK bullets.
__________________
Lock and load, the zombies (democrats) are coming (to take your guns)! |
November 25, 2012, 10:35 AM | #33 |
Senior Member
Join Date: January 16, 2010
Location: Minnesota
Posts: 3,577
|
I won't use anything other than IMR-4064 for .243. I've had stellar success with it in years past
Plus one for Mike- 38 gns 87 V-max Unreal accuracy at all ranges. BR-2 Primers a must
__________________
NRA Certified RSO NwCP- Performance Isn't Optional |
November 26, 2012, 05:40 PM | #34 |
Senior Member
Join Date: April 4, 1999
Location: New Mexico
Posts: 1,889
|
My favorite powder is IMR 4350 behind a 100 gr bullet. Velocities are slightly over 3100 fps from a 22 inch M70 FWT pre 64.
Factory loads often run about 2900 fps which takes it down in effectiveness a lot. My loads exceed handbook loads by 2-3 grains so I won't post them. However, when the .243 WCF first came out the writers used 45 gr of 4350. I have not found any pressure problems. I have worked up loads with 4350 in my rifle that exceeded 3200 fps with 100 gr bullets. I know pressures are high, but do not get hard bolt lift or problems with primers showing too high. My rifle is a "fast" rifle, and I have never found another that can reach such velocities. I had a friend who had a Sako, and he had difficulty getting over 3000 fps from his rifle. In my view any powder faster than 4350 can not get the velocities I want in a .243. I tried H 4831, but the case would not hold enough. Norma 204 is the same burning rate as 4350, and is more dense. I have not used any of the newest powders, but if you stay with a burning rate of 4350 or slightly slower, if the case will hold it, performance will be fine. Jerry
__________________
Ecclesiastes 12:13 ¶Let us hear the conclusion of the whole matter: Fear God, and keep his commandments: for this is the whole duty of man. 14 For God shall bring every work into judgment, with every secret thing, whether it be good, or whether it be evil. |
November 26, 2012, 06:10 PM | #35 |
Senior Member
Join Date: September 2, 2012
Location: N.central Pa.
Posts: 302
|
I am getting really nice groups with H4350 and Hornady 100 gr.BTSB Interlock bullets.
__________________
Gun control means: Being able to hit what you are shooting at. |
November 27, 2012, 05:48 PM | #36 |
Senior Member
Join Date: July 2, 2006
Location: Corpus Christi TX
Posts: 1,148
|
I'm really sold on RL17. I load for accuracy first and the resulting velocity is what it will be. If I can figure out how to post a pic of my .23 group I will. My pet load for my Howa with an 85gr Speer BTSP is 42.7 gr. it's a full grain under max, very little brass. Comes off with the trims so that tells me I'm not getting excessive pressure. Velocity is screaming at 3281. My 1:10 barrel shoots 100gr ok, but not as accurately. It's about 1 MOA. My pet load for that round is 40.5 gr of H4831. Velocity is a little slow at 2847. But bullet holds together nicely and does a good number on both hogs and deer. Nice thing is the 100yd POI for this gun is only 1" below the 85 and centerline is dead on. Going to test a few loads with IMR 4064 to see if I can tighten up the group a tad.
__________________
VEGETARIAN...old indian word for bad hunter |
November 27, 2012, 09:30 PM | #37 |
Senior Member
Join Date: October 17, 2006
Location: East Texas
Posts: 334
|
In my old Savage, I had good results with Reloader-22 , Remington 9 1/2 primer and the Sierra 100 gn bullet.
|
November 27, 2012, 09:46 PM | #38 |
Member
Join Date: March 25, 2012
Posts: 23
|
My two favorite loads for .243 are 43.5 gr. of H4350, CCI 200 primer in Winchester brass with 90 gr. Nosler Accubond and 42.0 gr. of H100V, WLR primer, Winchester brass with 100 gr. Nosler Partition. Accuracy is very good out of my Browning X-bolt, both under an inch 4-shot group @ 100 yards, and both are more than enough to drop a decent sized deer.
|
Thread Tools | Search this Thread |
|
|