lee collet die for 7-30 Waters

THERAVEN · December 16, 2009, 07:43 PM

Does anyone have one.

Scorch · December 17, 2009, 12:54 PM

Looking at Lee's site, it doesn't look like they make the collet dies for 7-30 Waters.

**Unclenick** · December 17, 2009, 02:52 PM

They will make a custom one for you. You have to send them two or three cases with the order, IIRC? I forget what the custom setup fee is? Look around their site and you will find custom order information.

LATER: Wrong. They do make a crimp die for the 7-30 Waters as a standard part #90838. If you don't find it on Midway or Midsouth, you can order it direct from them. Only drawback is they charge full list when you order direct.

rwilson452 · December 17, 2009, 03:03 PM

I don't think he ask for a crimp die he was asking about a collet die. Like in neck sizing.

Quote:

LATER: Wrong. They do make a crimp die for the 7-30 Waters as a standard part #90838. If you don't find it on Midway or Midsouth, you can order it direct from them. Only drawback is they charge full list when you order direct.

**Unclenick** · December 17, 2009, 03:53 PM

Yup. Sorry. Mind wandered. Back to my original point. They will custom make one, but I don't know the fee?

LATER: OK. Here it is:

Quote:

Collet Die Set

A Custom Collet Die Set consists of the Collet sizer and the Dead Length Bullet Seater, a shell holder and dipper. Maximum outer diameter at the base is .555 and the maximum bullet diameter is .375. There are a few exceptions for the larger Ultra Mags and if interested in those, you may want to give us a call or send a case to determine whether or not we can make them.

We need:

1. Payment of $59.00 ($55.00 + $4.00 processing fee)
2. 2 fired cases from the rifle that the ammunition is to be reloaded for
3. 2 sample bullets

December 16, 2009, 07:43 PM	#1
THERAVEN Member Join Date: February 24, 2009 Posts: 31	lee collet die for 7-30 Waters Does anyone have one.

December 17, 2009, 12:54 PM	#2
Scorch Senior Member Join Date: February 13, 2006 Location: Washington state Posts: 15,248	Looking at Lee's site, it doesn't look like they make the collet dies for 7-30 Waters. __________________ Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services

December 17, 2009, 02:52 PM	#3
Unclenick Staff Join Date: March 4, 2005 Location: Ohio Posts: 21,063	They will make a custom one for you. You have to send them two or three cases with the order, IIRC? I forget what the custom setup fee is? Look around their site and you will find custom order information. LATER: Wrong. They do make a crimp die for the 7-30 Waters as a standard part #90838. If you don't find it on Midway or Midsouth, you can order it direct from them. Only drawback is they charge full list when you order direct. __________________ Gunsite Orange Hat Family Member CMP Certified GSM Master Instructor NRA Certified Rifle Instructor NRA Benefactor Member and Golden Eagle