November 1, 2010, 01:31 PM | #1 |
Senior Member
Join Date: August 24, 2004
Location: Hill Country
Posts: 522
|
Savage 99 scope base
Recently I traded for a Savage 99 EG that has been drilled & tapped. I'm thinking of mounting a Kollmorgen Bear Cub which is 26mm in dia. Ringwise the only choice is STD rings. I already have these.
I've been unable to find a base with matte finish to go with the scope. Gloss is readily available. My question is how best to "age" the gloss so it will look right with the old rifle and nearly-as-old scope? Thanks, guys. |
November 1, 2010, 02:45 PM | #2 |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
|
Send it off and have it rust blued.
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
November 1, 2010, 05:49 PM | #3 |
Senior Member
Join Date: August 24, 2004
Location: Hill Country
Posts: 522
|
Thanks for the reply, Scorch.
I think I'll order the gloss 1 piece base and see how it looks on the gun and go from there. |
November 1, 2010, 06:41 PM | #4 |
Senior Member
Join Date: September 19, 2008
Posts: 4,678
|
If the base is soaked in vinegar to remove the high-gloss bluing, dried, then cold blued, dried & waxed, you should have the desired matte blue.
. |
November 2, 2010, 03:14 PM | #5 |
Senior Member
Join Date: August 24, 2004
Location: Hill Country
Posts: 522
|
I found a one-piece Leupold base locally. It looks OK.
I'll keep the vinegar treatment in mind for future use. Thanks guys. |
|
|