|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
March 14, 2009, 11:35 PM | #1 |
Senior Member
Join Date: July 28, 2007
Location: Ohio
Posts: 11,756
|
Finding small gun parts
I've heard and read about Numrich and Brownells, and I recall the Gun Parts Corp of West Hurley, NY (which I think is now owned by Brownell's?)
Anyhow, I'm a LONG way from a gunsmith, but smart enough to know that I'm not. But I've got one "can't miss easy fix" and I've got one basket case that I have nothing to lose by trying... But I need some help finding the parts. First is the EASY FIX: I was looking at the magazine that came with my buddy's HK USP .45 full size and wondering how they limited the capacity (he bought it during the hi-cap ban) I was NOT altering or nor intending to. He was looking at it also and saw a couple of tabs and elected to snap them off... and those tabs are the fat plastic tabs that hold the magazine base plate on the mag... The mag is worthless without the base plate. It's all plastic, this piece. A new magazine is like $50 or so. How can I get this simple piece of plastic to make this magazine useful again? Next is a Taurus PT-22 that my bro-in-law kicked toward me because he's frustrated with it's inability to feed more than one round in a row. I tried a half dozen different brands of ammo and I can't do much better. Brought it home from the range and pulled the left grip panel off and it's quite obviously working on only HALF of the slide return spring power as the left side "finger" is snapped off near the top. A new piece won't make this a fine, exquisite piece, but it MIGHT make the damn thing an actual semi-auto instead of a manually operated repeater. I checked both Brownell's and Numrich. Brownell's either doesn't carry any HK and Taurus parts, or I can't find them. Numrich shows the piece I need for the Taurus in a schematic, but lists it as out of stock. The only schematic I could find for the HK mag base plate was NOT the correct one I'm looking for. Anyone know where to find these parts or where to look? Sorry for the length of my post and thanks for any help you can give me.
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss. |
March 15, 2009, 04:06 PM | #2 |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
|
Numrich is the old name for Gun Parts Corp. All of us old-timers still call it Numrich, though. I do not know if Brownells owns Gun Parts Corp, though. Brownells owns Sinclair.
Taurus firearms have a lifetime warranty. if you return the pistol to them, they will repair it.
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
March 15, 2009, 05:57 PM | #3 |
Senior Member
Join Date: July 28, 2007
Location: Ohio
Posts: 11,756
|
Yep. I just don't want to do that. If it were S&W, they'd send out a call tag or a prepaid box or label. Taurus wants to me to ship it and this is a pistol I didn't pay any money for, so you can bet for sure that I don't want to drop half a hundred to ship it to them.
Now this may sound stupid, but I'm serious: Would it be possible for me to DROP IT OFF to them in Florida when I'm there this summer? No shipping there!
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss. |
March 15, 2009, 08:30 PM | #4 |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
|
Call them and ask.
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
March 17, 2009, 08:48 PM | #5 |
Senior Member
Join Date: August 14, 2008
Posts: 209
|
Go to Taurus' website and find the "blown apart" schematics.
Find the part you need and write down the part # Call them on the toll free number. Most small pieces, springs, pins etc. are only a buck or three. Shipping is 8 or 9 IIRC so get some spare striker spring or "jesus clip" while you're at it.
__________________
"Bones, what killed him ?" "Acute lead poisoning Jim....." ST-TOS#61 |
March 20, 2009, 09:37 AM | #6 |
Junior member
Join Date: December 10, 2006
Location: MANNING SC
Posts: 837
|
parts
BUY AMERICAN.thats why I like american made guns.even tho I have a few foreign.
|
March 23, 2009, 08:20 PM | #7 | |
Senior Member
Join Date: July 28, 2007
Location: Ohio
Posts: 11,756
|
Quote:
The pistol in question is made in Florida. That's American, right?
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss. |
|
March 24, 2009, 09:32 AM | #8 |
Member
Join Date: January 7, 2006
Posts: 63
|
Try these guys.
http://www.jackfirstgun.com/ |
|
|