How much is a gallon of Break Free

Krom · October 20, 2001, 01:52 PM

Just curious as to how much civilian prices are for a gallon of CLP,if you can even get the gallon jugs. Thanks

MADISON · October 20, 2001, 03:16 PM

How much is a gallon [128 ounces] of BREAK-FREE?
I went to a GRAF & SONS catalog for the price. It seems that if you buy a gallon, you must pay $17 in HAZARDOUS MATER FEES. They price is as $12.95 for 32 ounces.
MADISON

MatthewM · October 20, 2001, 07:21 PM

Yeah, but if you fill a paint can with BreakFree you can just drop your pistols in and skip all that cleaning and worrying about rust and such.

Just shake them out real good before heading to the range.

MADISON · October 21, 2001, 08:57 AM

If you want to "DUNK IT", you might want to try
what I use: ED's Red...
Equal parts of:
K-1 Kerosene
Dextron 2 or 3
Varsol
Wwab out the bore with a brush and dry the whole thing off, after an over night soak.
Last time I mixed 85 ounces [1 quart of each] it cost me about $8.50.

dZ · October 22, 2001, 01:03 PM

$212 for 6 gallons

Product #: L634605C26
Product Name: ROYCO 634 MIL-PRF-63460DAM6 6 X 1 GALLON CASE
Description: CLEANER, LUBRICANT, AND PRESERVATIVE FOR WEAPONS AND WEAPONS SYSTEMS
ROYCO 634 is a highly penetrating, mobile liquid lubricant which combines three essential functions in a single product; cleaning, lubrication, and preservation of handheld weapons, and weapons systems of both large and small caliber. ROYCO 634 may also be considered for many industrial applications as well.
CLEANING: ROYCO 634 provides additives which in addition to their ability to penetrate between metal surfaces, aid in the effective removal of built up dirt, corrosion particles and firing residues which can be abrasive to both recoil and gas operated mechanisms.

PRESERVATION: After cleaning, a thin-film layer of preservative forms immediately on the surfaces which not only displaces water but provides a corrosion resistant barrier against rust and dirt.
LUBRICATION: ROYCO 634 incorporates advanced technology additives to enhance film strength and antiwear properties - thereby reducing friction between moving parts and minimizing wear and the buildup of wear-related debris.
USES: ROYCO 634 is formulated to meet the complete requirements of cleaning, lubricating, and preserving both small and large caliber weapons in virtually all climate conditions from -65oF to +150oF. In addition, ROYCO 634 contains no ozone depleting compounds and meets California Clean Air Act VOC requirements. ROYCO 634 is not limited only to ordnance use, in fact, it has been proven effective in a wide variety of applications including automotive, aviation, marine, and general plant maintenance of industrial equipment.
SPECIFICATION: ROYCO 634 is qualified to and meets all requirements of MILSPEC: MIL-PRF- 63460D Amd 6.
PACKAGING: ROYCO 634 is available in 1 gallon bottles as well as 5 gallon pails and 55 gallon drums. Other packages may be available on special request.
TYPICAL PHYSICAL PROPERTIES
PROPERTY/ TYPICAL RESULT
1) Viscosity, cSt
- @ 40oC (104oF) / 9.64
- @ -53.8oC (-65oF) / 3630
2) Pour Point, (oF) / -75
3) Flash Point, COC, oC (oF) / 100 (212)
4) Shell 4-Ball Wear, mm2 / 0.40
- 40 kg, 1200 RPM, 75oC, 1 hr.
5) Specific Gravity, 60 deg F / 0.87
6) Falex Load Carrying Capacity / PASS
- 750 lb. Jaw Load
7) Firing Residue Removal, % / 85
- (WC-844 Propellant)
8) Salt Spray Corrosion Resistance / PASS
9) Humidity Cabinet Rust Resistance / PASS
- 120oF, 100% rel. humidity, 900 hrs.
10) Water Displacement and Stability / PASS
11) Metal Corrosion Test, wt change mg/cm2
- 130oF, 168 hrs.
- Zinc / +0.00
- Aluminum / +0.02
- Brass / +0.07
- Steel / +0.03
- Copper / +0.01
- Magnesium / +0.01
- Cadmium / +0.02
12) Low Temperature Residue and Fluidity / PASS
13) Reactivity with Chem Agent Detector
-M8 Detector / PASS
-M9 Detector / PASS
Warranty: All products purchased from Royal are subject to terms and conditions set out in the contract, order acknowledgement and/or bill of lading. Royal warrants only that its product will meet those specifications designated as such herein or in other publications. All other information supplied by Royal is considered accurate but is furnished on the expressed condition that the customer shall make its own assessment to determine the product's suitability for a particular purpose. No warranty is expressed or implied regarding such other information, the data upon which the same is based, or the results to be obtained from the use thereof; that any product shall be merchantable or fit for any particular purpose; or that the use of such other information or product will not infringe any patent.
Pricing Information:
Unit Price: $212.18
Package Type: Case
Units Per Package: 1
Product Details:
Weight/Volume (gal.): 6
Minimum Order Quantity: 1
Trade Name: ROYCO
Lead Time: 14 Days

Clayton · October 22, 2001, 03:11 PM

If you want Break-Free CLP, get it here:
www.midsouthshooterssupply.com

A gallon runs $47.10.

Lots of other sizes available, and no harzardous fees.

October 20, 2001, 01:52 PM	#1
Krom Junior Member Join Date: October 17, 2001 Posts: 13	How much is a gallon of Break Free Just curious as to how much civilian prices are for a gallon of CLP,if you can even get the gallon jugs. Thanks

October 20, 2001, 03:16 PM	#2
MADISON Senior Member Join Date: January 1, 2000 Location: Roanoke, Virginia Posts: 2,678	128 ounces of BREAK-FREE? How much is a gallon [128 ounces] of BREAK-FREE? I went to a GRAF & SONS catalog for the price. It seems that if you buy a gallon, you must pay $17 in HAZARDOUS MATER FEES. They price is as $12.95 for 32 ounces. MADISON

October 21, 2001, 08:57 AM	#4
MADISON Senior Member Join Date: January 1, 2000 Location: Roanoke, Virginia Posts: 2,678	Do you want a "dunk it" suggestion? If you want to "DUNK IT", you might want to try what I use: ED's Red... Equal parts of: K-1 Kerosene Dextron 2 or 3 Varsol Wwab out the bore with a brush and dry the whole thing off, after an over night soak. Last time I mixed 85 ounces [1 quart of each] it cost me about $8.50.

October 22, 2001, 01:03 PM	#5
dZ Senior Member Join Date: May 31, 1999 Location: Exiled, Fetid Swamp, DC Posts: 7,548	$212 for 6 gallons Product #: L634605C26 Product Name: ROYCO 634 MIL-PRF-63460DAM6 6 X 1 GALLON CASE Description: CLEANER, LUBRICANT, AND PRESERVATIVE FOR WEAPONS AND WEAPONS SYSTEMS ROYCO 634 is a highly penetrating, mobile liquid lubricant which combines three essential functions in a single product; cleaning, lubrication, and preservation of handheld weapons, and weapons systems of both large and small caliber. ROYCO 634 may also be considered for many industrial applications as well. CLEANING: ROYCO 634 provides additives which in addition to their ability to penetrate between metal surfaces, aid in the effective removal of built up dirt, corrosion particles and firing residues which can be abrasive to both recoil and gas operated mechanisms. PRESERVATION: After cleaning, a thin-film layer of preservative forms immediately on the surfaces which not only displaces water but provides a corrosion resistant barrier against rust and dirt. LUBRICATION: ROYCO 634 incorporates advanced technology additives to enhance film strength and antiwear properties - thereby reducing friction between moving parts and minimizing wear and the buildup of wear-related debris. USES: ROYCO 634 is formulated to meet the complete requirements of cleaning, lubricating, and preserving both small and large caliber weapons in virtually all climate conditions from -65oF to +150oF. In addition, ROYCO 634 contains no ozone depleting compounds and meets California Clean Air Act VOC requirements. ROYCO 634 is not limited only to ordnance use, in fact, it has been proven effective in a wide variety of applications including automotive, aviation, marine, and general plant maintenance of industrial equipment. SPECIFICATION: ROYCO 634 is qualified to and meets all requirements of MILSPEC: MIL-PRF- 63460D Amd 6. PACKAGING: ROYCO 634 is available in 1 gallon bottles as well as 5 gallon pails and 55 gallon drums. Other packages may be available on special request. TYPICAL PHYSICAL PROPERTIES PROPERTY/ TYPICAL RESULT 1) Viscosity, cSt - @ 40oC (104oF) / 9.64 - @ -53.8oC (-65oF) / 3630 2) Pour Point, (oF) / -75 3) Flash Point, COC, oC (oF) / 100 (212) 4) Shell 4-Ball Wear, mm2 / 0.40 - 40 kg, 1200 RPM, 75oC, 1 hr. 5) Specific Gravity, 60 deg F / 0.87 6) Falex Load Carrying Capacity / PASS - 750 lb. Jaw Load 7) Firing Residue Removal, % / 85 - (WC-844 Propellant) 8) Salt Spray Corrosion Resistance / PASS 9) Humidity Cabinet Rust Resistance / PASS - 120oF, 100% rel. humidity, 900 hrs. 10) Water Displacement and Stability / PASS 11) Metal Corrosion Test, wt change mg/cm2 - 130oF, 168 hrs. - Zinc / +0.00 - Aluminum / +0.02 - Brass / +0.07 - Steel / +0.03 - Copper / +0.01 - Magnesium / +0.01 - Cadmium / +0.02 12) Low Temperature Residue and Fluidity / PASS 13) Reactivity with Chem Agent Detector -M8 Detector / PASS -M9 Detector / PASS Warranty: All products purchased from Royal are subject to terms and conditions set out in the contract, order acknowledgement and/or bill of lading. Royal warrants only that its product will meet those specifications designated as such herein or in other publications. All other information supplied by Royal is considered accurate but is furnished on the expressed condition that the customer shall make its own assessment to determine the product's suitability for a particular purpose. No warranty is expressed or implied regarding such other information, the data upon which the same is based, or the results to be obtained from the use thereof; that any product shall be merchantable or fit for any particular purpose; or that the use of such other information or product will not infringe any patent. Pricing Information: Unit Price: $212.18 Package Type: Case Units Per Package: 1 Product Details: Weight/Volume (gal.): 6 Minimum Order Quantity: 1 Trade Name: ROYCO Lead Time: 14 Days __________________ "O tell the Lacedomecians to damn the torpedoes." BOTR, Chapter V: Some Monsters

October 20, 2001, 07:21 PM	#3
MatthewM Senior Member Join Date: April 9, 2001 Posts: 1,003	Yeah, but if you fill a paint can with BreakFree you can just drop your pistols in and skip all that cleaning and worrying about rust and such. Just shake them out real good before heading to the range.

October 22, 2001, 03:11 PM	#6
Clayton Senior Member Join Date: July 27, 2001 Location: Bentonville, Arkansas Posts: 268	If you want Break-Free CLP, get it here: www.midsouthshooterssupply.com A gallon runs $47.10. Lots of other sizes available, and no harzardous fees.