The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old October 26, 2010, 08:46 PM   #3526
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
yes chambered 38, s&w spl. on the barrel its a 5 shot . i dont know alot about it the guy i got it from said it belonged to his grand father if it helps the side plate has 3 screws .barrel maybe a little over an inch
Okay, sounds like you have a Chiefs Special which became the model 36 when S&W began using model numbers ~1957.
Your serial number of 89XX dates it to 1952.
There is actually 4 screws. The 4th being covered by the grip

Jim
laytonj1 is offline  
Old October 26, 2010, 09:20 PM   #3527
msnden
Member
 
Join Date: December 15, 2009
Posts: 57
I just purchased a S&W 686-3, it is my understanding that the -3 were made from 1988/1993 will the serial # narrow it down? #BHY 57xx any information would be well received!! Thanks msn

msnden is offline  
Old October 27, 2010, 04:18 AM   #3528
danman40391
Junior Member
 
Join Date: October 26, 2010
Posts: 5
chiefs special

thanks i appreciate the help. any idea on what its worth.i gave 40 for it . i know its worth more than that.is it worth sending to be nickel plated or leave it alone .
danman40391 is offline  
Old October 27, 2010, 06:59 AM   #3529
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,723
msnden: They were using the serial number letter prefixes a bit out of order at the time, but it looks like BHY would indicate 1992.
FlyFish is offline  
Old October 27, 2010, 12:03 PM   #3530
msnden
Member
 
Join Date: December 15, 2009
Posts: 57
msnden: They were using the serial number letter prefixes a bit out of order at the time, but it looks like BHY would indicate 1992.

F/F Thanks!!! msn
msnden is offline  
Old October 27, 2010, 05:43 PM   #3531
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
any idea on what its worth.i gave 40 for it . i know its worth more than that.is it worth sending to be nickel plated or leave it alone .
Without knowing the condition all I can say is somewhere in the $250 to $500 range.
Unless the current finish is in bad shape I would leave it alone. That said, since you got it for free basically, even sending it off for a quality refinishing and tuning you would still come out ahead.

Jim
laytonj1 is offline  
Old October 28, 2010, 10:07 AM   #3532
blaster2605
Junior Member
 
Join Date: October 28, 2010
Posts: 4
how about serial number 71XXX?
blaster2605 is offline  
Old October 28, 2010, 11:14 AM   #3533
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,723
Quote:
how about serial number 71XXX?
Sometimes it's possible to pinpoint a year knowing nothing more than the serial number, but a 5-digit sn with no letter prefix could apply to a number of different models and/or years. Please provide some more details, such as the caliber of the gun (usually stamped on the barrel), number of chambers in the cylinder (usually 5 or 6), barrel length, whether there's a safety lever hinged into the backstrap, etc. Also, be sure you've got the whole serial number, including any leading letter(s), and that you've taken it from the bottom of the grip frame. If you can do that, we should be able to help you out.
FlyFish is offline  
Old November 2, 2010, 07:39 AM   #3534
blaster2605
Junior Member
 
Join Date: October 28, 2010
Posts: 4
.38 S&W SPECIAL CTG.
6 chambers
3.5" barrel length
blaster2605 is offline  
Old November 2, 2010, 01:15 PM   #3535
asiafish
Junior Member
 
Join Date: November 2, 2010
Posts: 4
Two Revolvers

I have two S&W revolvers that I'd like to know the age of.

First one is a Model 60 with SN of either AVW8090 or 32536 (can't tell which is the SN).

The second is a K38 Masterpiece with SN of K296810.

Thank you in advance,

Andrew
asiafish is offline  
Old November 2, 2010, 05:08 PM   #3536
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
.38 S&W SPECIAL CTG.
6 chambers
And a SN. of 71XXX would make it a .38 Military & Police Model of 1905.
Serial numbers ran from 62450 in 1905 to 73250 in 1906.

Quote:
First one is a Model 60 with SN of either AVW8090 or 32536 (can't tell which is the SN).

The second is a K38 Masterpiece with SN of K296810.
AVW8090 = 1987. The 32536 is an assembly number.
K296810 = 1957.

Jim
laytonj1 is offline  
Old November 2, 2010, 05:29 PM   #3537
asiafish
Junior Member
 
Join Date: November 2, 2010
Posts: 4
Thank you

Thanks Jim.

1957, wow. I had no idea the gun was that old. I thought it was from the early 80s at the earliest.

Anything I should know about firing a weapon of that age? Is it safe with modern loads? +P? I just bought the gun a few months ago and have only fired mild wadcutter loads, but will probably use this as my home defense gun and want to load Hornady Critical Defense, a 110 grain JHP at 1010 FPS. Its not listed as a +P, but its probably quite close.
asiafish is offline  
Old November 2, 2010, 07:22 PM   #3538
blaster2605
Junior Member
 
Join Date: October 28, 2010
Posts: 4
Thanks Jim.

I'm surprised that the revolver is that old.
blaster2605 is offline  
Old November 2, 2010, 07:52 PM   #3539
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
1957, wow. I had no idea the gun was that old.
Serial numbers ran from K288989 to K317822 in 1957.

While +P will not hurt it I would use standard ammo for target shooting and plinking and the +P stuff for defense and occasional practice.
A really good +P load I use is Buffalo Bore Heavy .38 special +P. They have a 125gr. that will do 1250fps from a 4" barrel and a 158gr. that will do 1150fps from a 4".

Quote:
I'm surprised that the revolver is that old.
As long as you took the SN from the underside of the frames grip butt, it is.

Jim
laytonj1 is offline  
Old November 2, 2010, 07:59 PM   #3540
asiafish
Junior Member
 
Join Date: November 2, 2010
Posts: 4
1250 from a 4", thats almost .357 magnum territory. It guess that means the 110 grain 1010 fps really is a standard pressure load.

My local gun shop recommended it for both of my revolvers, as neither are +P rated.
asiafish is offline  
Old November 2, 2010, 08:08 PM   #3541
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
My local gun shop recommended it for both of my revolvers, as neither are +P rated.
And that would be a "safe" recomendation. Which is why I would limit the +P stuff to defense.
However the BB +P stuff has been tested in a model 60.
http://www.buffalobore.com/index.php...duct_list&c=22

Jim
laytonj1 is offline  
Old November 2, 2010, 08:29 PM   #3542
asiafish
Junior Member
 
Join Date: November 2, 2010
Posts: 4
Looks like good stuff. I used to keep the model 60 loaded with 110 grain silvertips (standard pressure).
asiafish is offline  
Old November 3, 2010, 05:44 AM   #3543
blaster2605
Junior Member
 
Join Date: October 28, 2010
Posts: 4
Yes Jim the I got the serial # from the bottom of the grip butt.
blaster2605 is offline  
Old November 4, 2010, 08:57 PM   #3544
The Book
Member
 
Join Date: November 4, 2010
Location: Eastern Ks
Posts: 72
Just found this site and looks great! My Dad has a S&W 38cal.The numbers on the bottom are 442476 This is an breakdown model. If anyone can help me with the age ? Thanks-----------Mike
The Book is offline  
Old November 6, 2010, 09:34 AM   #3545
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
My Dad has a S&W 38cal.The numbers on the bottom are 442476 This is an breakdown model.
Sounds like a .38 Double Action 4th Model, top-break (seperates at top and barrel tips down).
Serial numbers ran from 322701 in 1895 to 539000 in 1909.

Jim
laytonj1 is offline  
Old November 6, 2010, 11:02 AM   #3546
boxing21
Member
 
Join Date: March 22, 2006
Posts: 41
Hey folks, was wondering if anyone could help me figure out what excatly I have here. My Grandfather gave me this revolver a few years back, and I was wondering what year it was manufactured.

Airweight .38spl CTG 6 shot mod # 12-2 Serial Number C9 45XXX

Sorry for the camer phone pic...I don't own a digital camera.

Thanks in advance for any assistance!

Last edited by Glenn E. Meyer; November 30, 2013 at 11:47 AM.
boxing21 is offline  
Old November 6, 2010, 11:30 AM   #3547
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Airweight .38spl CTG 6 shot. Serial Number C9 45XXX
Is there a space between the 9 and 4 on the gun?. If you took the serial number from the underside of the frames grip butt and it's C945XXX it would be a model 12 with SN's running from C810533 in 1966 to C999999 in 1967.

Jim
laytonj1 is offline  
Old November 6, 2010, 11:11 PM   #3548
nutsandbolts18
Junior Member
 
Join Date: November 6, 2010
Posts: 2
S&W 38 Special

Hi. looking at buying a S&W 38 Special Revolver, could somebody help me with any info like year it was made etc. its serial is J27xxx Thanks!
nutsandbolts18 is offline  
Old November 7, 2010, 08:05 AM   #3549
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,723
Quote:
serial is J27xxx
Serial numbers ran from J1 in 1969 to J99999 in 1970.
FlyFish is offline  
Old November 7, 2010, 09:00 AM   #3550
nutsandbolts18
Junior Member
 
Join Date: November 6, 2010
Posts: 2
Thanks For The Reply FlyFish!
nutsandbolts18 is offline  
Reply

Tags
s&w 686

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:37 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.58681 seconds with 9 queries