September 24, 2013, 05:19 PM | #1 |
Junior Member
Join Date: September 24, 2013
Posts: 6
|
PMC 308b ammo issues
Okay if anyone could help it would be much appreciated. Last week I bought the socom 16 took it home and attempted to load a round but the bolt would not close completely. Needless to say after spending 1700 dollars and another 300 plus on 500 rds. Thought it was the socom issue and did some research and noticedthey may have slamfire issues so brought it back with no problems returning it. Lucky for me I see they got a new scar 17 in so once again bring it home and the round would not come off the magazine completely only enough to hit the bottom of chamber. Thought it might off caused damage but cleaned the copper off with only a very small indentation. The box says 7.62 as well but is 308. Any ideas?? Thinking about sending the ammo back.
|
September 24, 2013, 05:56 PM | #2 |
Junior member
Join Date: July 29, 2013
Location: Gardnerville, NV
Posts: 569
|
1st, check if some other brand 7.62x51 (or 308) will chamber.
Grab some calipers and check that pmc ammo. |
September 24, 2013, 06:05 PM | #3 |
Moderator Emeritus
Join Date: June 25, 2008
Location: Austin, CO
Posts: 19,578
|
Not a reloading issue and one thread only on the topic, please.
Anyone with answers: http://thefiringline.com/forums/show...01#post5643601
__________________
Nobody plans to screw up their lives... ...they just don't plan not to. -Andy Stanley |
Thread Tools | Search this Thread |
|
|