|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
May 6, 2009, 05:41 PM | #1 |
Senior Member
Join Date: November 10, 2008
Location: Norway
Posts: 302
|
Bridgeport/Flatau device
what revolver brands/models can be fitted with a Bridgeport rig screw?
http://bridgeportrig.com/
__________________
Summa pia gratia nostra conservando corpora et cutodita, de gente fera Normannica nos libera, quae nostra vastat, Deus, regna. |
May 6, 2009, 08:54 PM | #2 |
Member
Join Date: March 28, 2009
Location: S.C
Posts: 35
|
From the looks of it, the mushroom screw goes where the hammer pivot screw should be. So I would think one could be made to fit any single action that has a hammer pivot screw in a similar location as the 1st or 2nd gen. colts.Which is pretty much all of them.
|
May 6, 2009, 08:59 PM | #3 |
Senior Member
Join Date: January 8, 2008
Posts: 669
|
$200 bucks? yea like hell.
__________________
Sod Buster Tried To Pull On Willson. |
May 6, 2009, 10:40 PM | #4 |
Senior Member
Join Date: November 10, 2008
Location: Norway
Posts: 302
|
i do have access to a lathe, and can get small jobs done quite cheap.
Yeah, 200 US$ for a bridgeport/flatau device is robbery.
__________________
Summa pia gratia nostra conservando corpora et cutodita, de gente fera Normannica nos libera, quae nostra vastat, Deus, regna. |
|
|