|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
April 10, 2009, 08:46 PM | #1 |
Junior member
Join Date: March 21, 2009
Location: sanford,mi
Posts: 590
|
.410s 2.5 inch or 3 inch shells?
I was just given a .410 that says 3" on the gun.Does that mean I can use 2.5 inch also?I am very new to .410s,so I want to be sure its safe to use the shorter shells.
|
April 10, 2009, 08:52 PM | #2 |
Member
Join Date: March 27, 2009
Location: Oklahoma/Kansas
Posts: 89
|
Go for it Sam. 410 chambered for 3" handles 2 1/2" just fine. A .410 seperates a real shooter from the " spray and pray" crowd--enjoy
__________________
"Normal "is just a setting on your dryer. |
April 10, 2009, 08:53 PM | #3 |
Senior Member
Join Date: August 23, 2008
Location: SoCal
Posts: 6,442
|
Yep, 2 1/2 or 3-inch shells are okay. You didn't mention what type of gun you have. A pump or auto may have difficulty loading the shorter shells via the magazine. If that's the case, you can load directly (single shot) into the port and close the bolt.
|
April 10, 2009, 08:55 PM | #4 |
Junior member
Join Date: March 21, 2009
Location: sanford,mi
Posts: 590
|
its a new england arms break barrel
|
April 10, 2009, 11:52 PM | #5 |
Senior Member
Join Date: August 23, 2008
Location: SoCal
Posts: 6,442
|
No problems.
|
Tags |
.410 |
|
|