August 6, 2012, 11:07 AM | #1 |
Senior Member
Join Date: July 31, 2012
Location: Texas
Posts: 303
|
Aluminum Can?
I have an old Dcell Maglite made from AA.
The shape, length, and threaded ends make this ideal for a can project. Saw off the end under the button, machine / bore a plug for the cut off end end, drill tap some machine screws, use one for a set screw... I have made one many years ago for a .22 with very good results. I have just acquired a Sub-2000, this is going to have a significantly greater amount of gas to control. With machined plug, I end up with just shy of 600cc volume Should I even attempt this as I did for the .22, or is it just going to be a pipe bomb waiting to hurt someone? Does anyone have an good resources of volume/round @ barrel length ratios? |
August 6, 2012, 12:37 PM | #2 |
Senior Member
Join Date: July 29, 2010
Location: The ATL (OTP)
Posts: 3,946
|
I vote no.
__________________
A major source of objection to a free economy is precisely that it ... gives people what they want instead of what a particular group thinks they ought to want. Underlying most arguments against the free market is a lack of belief in freedom itself. - Milton Friedman |
August 6, 2012, 02:54 PM | #3 |
Senior Member
Join Date: September 9, 2008
Location: Woooooshington
Posts: 1,797
|
Ah... are you in the USA Sabre9mm? I'm thinking no... that, or you're really not playing with a full deck.
__________________
Shoulder Drive Nicholson Club |
August 6, 2012, 05:14 PM | #4 |
Senior Member
Join Date: October 19, 2005
Location: Tx Panhandle Territory
Posts: 4,159
|
Um, unless you have all the licenses, stamps, and legal stuff (providing you're in the States) I would go as far as making that thing a high-tech bloop tube and stop there.
__________________
Rednecks... Keeping the woods critter-free since March 2, 1836. (TX Independence Day) I suspect a thing or two... because I've seen a thing or two. |
August 6, 2012, 08:36 PM | #5 |
Senior Member
Join Date: July 31, 2012
Location: Texas
Posts: 303
|
Me thinks I shall take that all as a no...
Thanks. |
August 6, 2012, 08:40 PM | #6 |
Moderator Emeritus
Join Date: June 25, 2008
Location: Austin, CO
Posts: 19,578
|
You need to research the laws regarding silencers.
I hope you realize that making one without the appropriate ATF paperwork is a federal offense. |
Thread Tools | Search this Thread |
|
|