|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
December 31, 2008, 01:27 AM | #1 |
Member
Join Date: May 4, 2008
Posts: 24
|
Bought 700PSS, wanting to know if it's been tampered with. (pics)
Well I got this rifle in a trade. I didn't see the condition before I bought it, and this is the first rifle I've owned of this kind. It seems that where the stock meets the chamber section of the barrel there is a whole bunch on glue all the way around. I'm not sure if this is normal or not. I don't care about it looking pretty, I just want to know if this is stock looking or if it has been repaired or tampered with in some way. Thank you so much-
__________________
Blessed be the Lord my rock, who trains my hands for war, and my fingers for battle. |
December 31, 2008, 01:47 AM | #2 |
Senior Member
Join Date: September 7, 2001
Location: Washington State
Posts: 2,166
|
I believe that, rather than being tampered with, your stock was bedded to perfectly match the action. Take a trip to the range and shoot some groups--you might be pleasantly surprised.
|
December 31, 2008, 01:54 AM | #3 |
Member
Join Date: May 4, 2008
Posts: 24
|
Thanks Powderman. Like I said I don't know much about bolt actions, If it is bedded then tamper is the wrong term. I appreciate it. That definitely is not stock looking though, am I correct?
__________________
Blessed be the Lord my rock, who trains my hands for war, and my fingers for battle. |
December 31, 2008, 02:04 AM | #4 |
Senior Member
Join Date: October 2, 2008
Location: Southern California
Posts: 111
|
You are correct, bedding of the action does not come from the factory. The action from the factory very often does not have a full contact to the stock. When there is play in the stock due to inadequate contact, the rifle after shooting will not always 'reset'. The action can move a little.
A lot of people use a epoxy compound and fill the inside of the stock a little, then place the action and the first few inches of the barrel into the epoxy. This then hardens, and if done correctly, the action then lifts, leaving a very very smooth contact area specially made for your action. This will make the action fit into the stock like a glove, preventing movement after firing. Its done to improve the accuracy... Its a added bonus. If its done correctly then trust me, if you were a accuracy nut it saved you some time and effort. Now, go to the range and shoot some groups! |
December 31, 2008, 02:14 AM | #5 |
Member
Join Date: May 4, 2008
Posts: 24
|
Thank you guys!
__________________
Blessed be the Lord my rock, who trains my hands for war, and my fingers for battle. |
January 5, 2009, 06:02 PM | #6 |
Junior member
Join Date: July 26, 2007
Posts: 3,668
|
Why don't you pull the action off the stock and see what's underneath? I usually bed the tang and recoil lug areas of rifles that feature aluminum bedding blocks, as does you rifle's H-S Precision stock.
You'll want to torque the action screws to 65 in/lbs. |
January 12, 2009, 10:25 PM | #7 |
Senior Member
Join Date: May 20, 2004
Posts: 173
|
Be gentle if you decide to go exploring under the action.
__________________
Chop Chop! |
January 12, 2009, 10:38 PM | #8 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
"Why don't you pull the action off the stock..."
Just hope that the guy who did the bedding job did it right, or the action might not come out of the stock; it might be in there forever, or until you saw the stock off! Jim |
January 13, 2009, 10:10 AM | #9 |
Junior member
Join Date: July 26, 2007
Posts: 3,668
|
Surely, the bedder used a releasing agent! Could be the action is just "skim bedded".
|
January 13, 2009, 08:24 PM | #10 | |
Senior Member
Join Date: September 7, 2001
Location: Washington State
Posts: 2,166
|
Quote:
The good part is that my bedding of the rifle turned it into a true 1/4 minute rifle--it puts 175 grain MatchKings into under a half inch consistently at 100 yards. The bad part is that the rifle hasn't been apart in over 5 years. Don't ask me how I know..... |
|
|
|