The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old April 6, 2013, 06:41 PM   #6126
Twmaster
Member
 
Join Date: April 23, 2012
Location: Dallas, TX
Posts: 35
What exactly do I have here?

I think it's a 1920's Model 1905, Series 4 hand eject in 32WCF (32-20)

S/N 1078xx It also has 34247 on the crane. (Is that the right word?)



Thank you in advance.
Twmaster is offline  
Old April 6, 2013, 08:18 PM   #6127
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
I think it's a 1920's Model 1905, Series 4 hand eject in 32WCF (32-20)
S/N 1078xx It also has 34247 on the crane. (Is that the right word?)
You're right on the model.
Serial numbers ran from 65701 in 1915 to 144684 in 1940. So, 1920's is a safe bet.
Other makers call it the crane, S&W calls it the yoke.

Jim
laytonj1 is offline  
Old April 6, 2013, 08:41 PM   #6128
Twmaster
Member
 
Join Date: April 23, 2012
Location: Dallas, TX
Posts: 35
Thank you Jim. On most S&W wheel guns I've seen the model number is stamped on the yoke. Any idea what that number means?

I found a post on an S&W forum a few minutes ago that mentioned a fellow having a 1923 built one of these with a serial in the 116xxx range. He claimed his barrel was stamped with 32-20 and IIRC S&W made the nomenclature change about then. So I am ASSuming this is pre-1923.

Saw it sitting in a pawn shop today. Looked so nice for a nearly 100 year old I had to have it.

Prolly paid too much, but, Feh. It's only money.

Any idea what frame this is? Wikipoodia says it is a variant of the model 10 which would make it a K?
Twmaster is offline  
Old April 6, 2013, 09:16 PM   #6129
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Any idea what frame this is?
Yes, it's a K frame.
The SCSW does not get that in depth on that model so I would defer to what you read on the S&W forum.
The other number is an assembly number.

Jim
laytonj1 is offline  
Old April 7, 2013, 01:44 PM   #6130
roweaver23
Junior Member
 
Join Date: March 19, 2013
Posts: 3
I recently inherited a S&W .32 Long ctg 6 shot revolver and would like to find out a little more about it. It is stainless with a pearl handle, S/N 2457** Any info would be appreciated, thanks!
roweaver23 is offline  
Old April 7, 2013, 03:44 PM   #6131
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
S/N 2457**
32 Hand Ejector 5th Change.
Serial numbers ran from 102501 in 1910 to 263000 in 1917.
S&W did not start making stainless steel guns till 50 years later so it's either nickel (shiny like chrome) or it's been refinished to look like stainless steel.

Jim
laytonj1 is offline  
Old April 7, 2013, 06:44 PM   #6132
Hook686
Senior Member
 
Join Date: May 22, 2005
Location: USA The Great State of California
Posts: 2,090
Quote:
Some folks don't like the world knowing the serial number of their guns.

Jim
Why is that ? It does not bother me, I cannot see what anyone could do with the information, except maybe identify it as a stolen gun.
__________________
Hook686

When the number of people in institutions reaches 51%, we change sides.
Hook686 is offline  
Old April 7, 2013, 08:00 PM   #6133
Twmaster
Member
 
Join Date: April 23, 2012
Location: Dallas, TX
Posts: 35
Thank you again Jim. I appreciate your assistance.
Twmaster is offline  
Old April 8, 2013, 02:49 PM   #6134
roweaver23
Junior Member
 
Join Date: March 19, 2013
Posts: 3
Thanks very much Jim! Excuse my ignorance on the stainless comment, it is nickel. Do you know if the pearl would be real, and any approximate value of this model?
roweaver23 is offline  
Old April 8, 2013, 03:23 PM   #6135
JBarnhill80
Junior Member
 
Join Date: April 8, 2013
Posts: 1
S&W Revolvers

New to this, but I have two S&W revolvers that I'm trying to figure out what the model numbers are to get a price for them out of a blue book.

One is a .32 Long CTG, 6 shot, Fluted Cylinder, 4" barrel, serial # C 291**

The second is a .38 special airweight hammerless snub nose, serial # 754**

Any help would be really appreciated!
JBarnhill80 is offline  
Old April 8, 2013, 05:30 PM   #6136
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Do you know if the pearl would be real, and any approximate value of this model?
Without seeing the grips I couldn't tell you.
Value can range from $300 in good to $600 or so in excellent.


Quote:
One is a .32 Long CTG, 6 shot, Fluted Cylinder, 4" barrel, serial # C 291**
The second is a .38 special airweight hammerless snub nose, serial # 754**
32 long. C291xx = It's a 32 Military & Police. It's built on the K frame and only 4813 were made between 1948 to 1950. Yours would be 48/49.
Value ranges from $1K in good to over $2K in excellent.
754xx = 1955/56. It's a 38 Chiefs Special Airweight (pre model 37)
$300 to $600+

Jim
laytonj1 is offline  
Old April 8, 2013, 06:16 PM   #6137
Twmaster
Member
 
Join Date: April 23, 2012
Location: Dallas, TX
Posts: 35
Since others are asking, what, approximately, would my Model 1905 be worth?
Twmaster is offline  
Old April 9, 2013, 01:02 AM   #6138
TLARKIN
Junior Member
 
Join Date: April 9, 2013
Posts: 2
Need help model 49

I would appreciate some help for serial lookup Model 49 388J35 nickel

Last edited by TLARKIN; April 9, 2013 at 01:08 AM.
TLARKIN is offline  
Old April 9, 2013, 04:28 PM   #6139
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Since others are asking, what, approximately, would my Model 1905 be worth?
The problem with giving gun values is the market is crazy right now and I have no idea what condition your gun is in, what the finish looks like, etc. The best I can do on older guns is give a range of values which may or may not be valid anymore.
That said, around $300 in good to $800+ in excellent.

Quote:
Model 49 388J35 nickel
1971/72.

Jim
laytonj1 is offline  
Old April 9, 2013, 05:59 PM   #6140
Twmaster
Member
 
Join Date: April 23, 2012
Location: Dallas, TX
Posts: 35
Thanks Jim. I appreciate the help.
Twmaster is offline  
Old April 9, 2013, 10:16 PM   #6141
TLARKIN
Junior Member
 
Join Date: April 9, 2013
Posts: 2
Need help model 49

Thanks for the information Jim
TLARKIN is offline  
Old April 11, 2013, 06:19 PM   #6142
Sparks1957
Senior Member
 
Join Date: September 4, 2011
Location: Vermont
Posts: 1,552
Hi folks,

Just found a nice little model 60 (.38 spl) in great condition for a very reasonable price. Serial number is R112xxx, curious how old it might be.

Thanks
Sparks1957 is offline  
Old April 12, 2013, 06:45 PM   #6143
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Serial number is R112xxx
Serial numbers ran from R100000 in 1974 to R190000 in 1977.

Jim
laytonj1 is offline  
Old April 12, 2013, 07:10 PM   #6144
Sparks1957
Senior Member
 
Join Date: September 4, 2011
Location: Vermont
Posts: 1,552
Thank you, sir! I appreciate your help.
Sparks1957 is offline  
Old April 12, 2013, 09:46 PM   #6145
Joy7089
Junior Member
 
Join Date: April 12, 2013
Posts: 1
S&W 32 CTG Long serial number 335XXX

Need DOB for 32 CTG long revolver serial number 335XXX
Joy7089 is offline  
Old April 13, 2013, 04:34 PM   #6146
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Need DOB for 32 CTG long revolver serial number 335XXX
It could be one of two models depending on whether it has a round butt or square butt (see pic).
If it's a round butt it would be a 32 Hand Ejector 3rd Model made around 1921.
If a square butt then a 32 Regulation Police also made around 1921.

Jim

laytonj1 is offline  
Old April 15, 2013, 06:11 PM   #6147
Marlo
Junior Member
 
Join Date: April 15, 2013
Location: Murder City, Detroit
Posts: 5
Model 3953... Want to find the year of production?

I am trying to find the year of manufacture for my Mod. 3953 the Serial # starts with VLN**** I'd also like to know it's estimated value. it's in mint condition, can anybody help me out? I'd certainly appreciate it..

Last edited by Marlo; April 15, 2013 at 06:31 PM.
Marlo is offline  
Old April 15, 2013, 06:39 PM   #6148
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Mod. 3953 the Serial # starts with VLN****
Basic model 3953's were made from 1991 to 1999. Yours would be near the end of the production run (1997 on).
Looking at completed auctions on Gunbroker over the last three months, prices have ranged from $450 to $650.

Jim
laytonj1 is offline  
Old April 15, 2013, 09:44 PM   #6149
Marlo
Junior Member
 
Join Date: April 15, 2013
Location: Murder City, Detroit
Posts: 5
Quote:
Basic model 3953's were made from 1991 to 1999. Yours would be near the end of the production run (1997 on).
Looking at completed auctions on Gunbroker over the last three months, prices have ranged from $450 to $650.

Jim

Thanks Jim, I had no idea how old it is.. I am flirting with the thought of selling it, I really love it, its a 9mm tank that's for sure, problem is its so darn heavy, and for me and my financial well being that's just not convenient nor practical, I don't have the luxury of keeping it and just buying another pistol to carry instead, I need something lighter, because everytime I carry it, it practically brings my pants down. lol

I am thinking of getting a 9mm glock, or my brother just recently got a Sig Sauer P290 with crimson trace laser and I really liked it, I haven't shot it, but I held it and I like the feeling of it and I imagine its allot lighter to carry for EDC. any thoughts on this? pro's and con's?
Marlo is offline  
Old April 16, 2013, 04:59 PM   #6150
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
any thoughts on this? pro's and con's?
I would suggest posting your question in the semi-auto forum were you would obtain a greater number responses from folks with experience on all the guns you asked about.

Jim
laytonj1 is offline  
Reply

Tags
s&w 686

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:00 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.73045 seconds with 9 queries