January 19, 2010, 12:39 PM | #1 |
Junior Member
Join Date: January 19, 2010
Location: South Alabama
Posts: 4
|
FN PBR Trigger
I have a newly acquired FNUSA PBR .308. The trigger is a little stiff at ~6.5lbs. How can I adjust the trigger to a lighter pull, without buying a new trigger or taking it to a gunsmith?
A little background until I can get some pics up if needed: Based on the Win. 70 action, There is epoxy holding 2 nuts on a screw that runs through the rear trigger spring, which I am assuming will adjust the trigger weight? Another nut on top of the trigger, on the same screw, also epoxied. any help? |
January 23, 2010, 12:20 AM | #2 |
Junior Member
Join Date: January 19, 2010
Location: South Alabama
Posts: 4
|
No dice eh? Well anyone have any aftermarket trigger suggestions?
|
January 23, 2010, 04:04 PM | #3 |
Senior Member
Join Date: October 21, 2008
Posts: 557
|
Rifle Basix
If you opt for a Jewel you will need to do some inletting work.
Not sure how "drop-in" it'd be, but Rifle Basix makes excellent products and they have even better customer service. Try this: http://www.eabco.com/winchester-triggers.html |
Thread Tools | Search this Thread |
|
|