|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
November 24, 2012, 06:31 PM | #1 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Gun show somewhat successful
Went to the Hampton VA Gun show today.
Came home with a 45-70 trapdoor. SN 279530. (1885) Rifle stock was cut down but barrel is original length. Bore is good and the rifle operates very smoothly. Finish is in my opinion, I little rough. Many would describe it as having a nice patina. For me I will clean it up a little and try to get it looking a little .....Better(?) Traded the 1873 Cap and ball Cattleman from Pietta, (9 inch barrel) I have been trying to sell, plus three hundred for the rifle and the seller threw in a Pacific "C" press which is the one which can be reversed so the handle moves up or down plus ten different shellholder rams. I'll post photos soonest.
__________________
Seek truth. Relax. Take a breath. Last edited by Doc Hoy; November 24, 2012 at 06:38 PM. |
November 24, 2012, 06:41 PM | #2 |
Staff
Join Date: November 2, 1998
Location: Colorado
Posts: 21,824
|
Since the Pacific Press was tossed in, I'd say you did well.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe! |
November 24, 2012, 07:18 PM | #3 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Photos
Lock
Breach Starboard side
__________________
Seek truth. Relax. Take a breath. |
November 24, 2012, 07:21 PM | #4 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Here's the press
__________________
Seek truth. Relax. Take a breath. |
November 25, 2012, 03:56 AM | #5 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Well....
I figure the revolver was worth 275.00.
That means I gave 575.00 for the rifle and press. The rifle will clean up nice and I think I can make the stock look decent. All in all it is not a great deal but I suppose not too bad. I can tell you I am thrilled to have the rifle as it is very close to what I have been looking for. It will be fun to work on. I'll sell the rams I don't need on the evil bay and try to get some money back that way.
__________________
Seek truth. Relax. Take a breath. |
November 25, 2012, 06:44 PM | #6 |
Senior Member
Join Date: November 19, 2009
Posts: 3,283
|
congrats Doc! I think that trapdoor has a lot of possibilities and looks like you can make it into a good shooter. You even got the rear sight and the barrel hasn't been whacked off. If you're looking to restore it - check with Lodgewood - they may have or can steer you in the right direction of an original fore stock section that you could splice under the lower barrel band. Or, you could just leave it the way it is. I hope you'll keep us posted on what you do with it along with photos. We always enjoy your "projects" greatly!
__________________
If a pair of '51 Navies were good enough for Billy Hickok, then a single Navy on my right hip is good enough for me . . . besides . . . I'm probably only half as good as he was anyways. Hiram's Rangers Badge #63 |
November 25, 2012, 11:18 PM | #7 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Thanks Triple B
I am about ready to put some photos up of the disassembly.
BTW, The barrel length is 29 1/4 from breach to muzzle. This does not fit any original barrel length I am able to find (quickly) so I guess the barrel was shortened too.
__________________
Seek truth. Relax. Take a breath. Last edited by Doc Hoy; November 26, 2012 at 12:12 AM. |
November 29, 2012, 10:37 AM | #8 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Here are some photos of the finished Trapdoor
On the back porch
In its place of honor The stock shortening job left a booggered up job, so I made a brass fitting to finish the forestock Here is the lock, receiver and sight
__________________
Seek truth. Relax. Take a breath. |
November 29, 2012, 10:44 AM | #9 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Remember...This is the "before"
__________________
Seek truth. Relax. Take a breath. |
November 29, 2012, 05:42 PM | #10 |
Senior Member
Join Date: October 8, 2006
Location: Northern Michigan
Posts: 2,772
|
Doc, you do good work. Very well done, sir.
|
November 29, 2012, 06:36 PM | #11 |
Senior Member
Join Date: September 7, 2012
Location: Crockett, Texas
Posts: 363
|
very nice indeed!
__________________
"I'm your huckleberry, it's just my game" |
November 29, 2012, 06:36 PM | #12 | |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,177
|
Quote:
|
|
November 30, 2012, 12:37 AM | #13 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Thanks, Guys
I love this stuff.
I'm buying all of the dies, molds, cases and such to start shooting this thing. (Gotta slug the bore first.)
__________________
Seek truth. Relax. Take a breath. |
November 30, 2012, 04:48 AM | #14 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Just got a response....
....from a guy at a big Trapdoor site.
This rifle started out as a cadet rifle. So the barrel length is correct. Perhaps never cut down. I suppose the flat muzzle (no crown) is original design.
__________________
Seek truth. Relax. Take a breath. |
November 30, 2012, 05:03 AM | #15 |
Senior Member
Join Date: October 11, 2009
Location: kentucky
Posts: 140
|
in my opion for what its worth doc, good buy an a very nice job bringing her back to life. well done!
one more thing doc....just how big is your safe?.... |
November 30, 2012, 05:48 AM | #16 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Thanks Starbuck
I don't need a safe.
I have a watch cat.
__________________
Seek truth. Relax. Take a breath. |
November 30, 2012, 07:28 AM | #17 |
Senior Member
Join Date: December 2, 2011
Posts: 146
|
I love it, and think ya did great.
|
December 1, 2012, 04:35 PM | #18 |
Senior Member
Join Date: November 25, 2012
Location: Eaton Rapids, MI
Posts: 445
|
Beautiful job...
and... the predator attack cat looks like it could gouge an intruders eye-balls out in seconds!!!
Sounds like good news on the "Cadet" version. Could be quite rare. I hope so!!! |
December 1, 2012, 06:57 PM | #19 |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,177
|
I dont think its a true cadet with the uncrowned muzzle but I've been wrong before.
|
December 1, 2012, 07:52 PM | #20 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Hawg
You could be correct.
The barrel length on the Cadet was supposed to be 29.6. Barrel length on this is slightly shorter at 29.3. It is possible that the muzzle sustained some damage and the owner repaired it by cutting of the barrel ala. hacksaw. It has a serial number which matches a Cadet rifle. It also has a trigger guard which is a match for Cadet trigger guards I am traveling until Thursday but when I return I should have all of the stuff I need to load some bullets. Once I do that, I shall see how she shoots.
__________________
Seek truth. Relax. Take a breath. |
Thread Tools | Search this Thread |
|
|