|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
December 9, 2001, 12:13 AM | #1 |
Senior Member
Join Date: February 14, 1999
Location: Eastern, PA, USA
Posts: 147
|
Looking for pics or specs on the DeLisle Carbine
Trying to reproduce the exterior and function of the gun minus the supressor, which I hear is a bear to make. Any help on getting the receiver parts and bolt, barrel and mag well figured out would be great.
__________________
An X is still an X with a Quarter Inch group at 100 yards With a Quarter Inch Group on the keyboard an X could be - Z,S,D, or C. I am a quarter inch typist - Please excuse the errors! |
December 9, 2001, 05:20 AM | #2 |
Senior Member
Join Date: November 15, 1999
Location: Clifton, Colorado USA
Posts: 724
|
Riss, currently Valkyrie Arms is manufacturing a limited run of the DeLisle Carbine based off of original blueprints. You may want to visit their website to see what information is available there. Hope this helps! Steve Mace
__________________
After today, its all historical |
December 9, 2001, 02:04 PM | #3 |
Senior Member
Join Date: February 14, 1999
Location: Eastern, PA, USA
Posts: 147
|
Have seen their site. Have also conversed with them about it. Unfortunately they are more than UN wulling to share any info. I especially need pics of the receiver and barrel attachments and the mag well insert. Rather at least have an idea of what it should look like than try to design my own from scratch. Should also be something in the patent database but cannot find anything.
__________________
An X is still an X with a Quarter Inch group at 100 yards With a Quarter Inch Group on the keyboard an X could be - Z,S,D, or C. I am a quarter inch typist - Please excuse the errors! |
|
|