|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
April 10, 2011, 05:10 PM | #1 |
Senior Member
Join Date: March 18, 2006
Location: Virginia
Posts: 423
|
Rem 1100 function check? New o-ring
My brother asked me to clean his 1100 as is was misfiring to the point of being unusable. The O-ring was stretched out and brittle so I am assuming this was the problem.
I changed the ring and cleaned the gun. Is there a function check on the 1100? I don't have the ability to fire a round and I am not familiar with this weapon at all. |
April 10, 2011, 05:28 PM | #2 |
Senior Member
Join Date: January 1, 2006
Location: Chicago suburbs
Posts: 832
|
Check this out. Thoroughly take it apart and clean/lube everything. It's easy and fun once you've done it a few times.
http://www.youtube.com/watch?v=v5XvGsBwYVc
__________________
"Ah ah. I know what you're thinkin'. Did he fire 6 shots or only 5? To tell you the truth in all this excitement I've kind of lost track myself. But with this being a .44 Magnum, the most powerful handgun in the world, and would blow your head clean off... you've got to ask yourself a question. Do I feel lucky? WELL DO YA, PUNK?!!!"- Harry Callahan(Dirty Harry) |
April 10, 2011, 06:46 PM | #3 |
Senior Member
Join Date: September 6, 2008
Posts: 1,777
|
Did you clean the fowling out of the gas ports?
|
April 10, 2011, 08:00 PM | #4 |
Senior Member
Join Date: March 18, 2006
Location: Virginia
Posts: 423
|
I did not know there were "gas ports".
|
April 10, 2011, 10:30 PM | #5 |
Senior Member
Join Date: January 1, 2006
Location: Chicago suburbs
Posts: 832
|
The ring that is part of the barrel has them inside it. Very important these stay clean otherwise cycling will be a problem.
__________________
"Ah ah. I know what you're thinkin'. Did he fire 6 shots or only 5? To tell you the truth in all this excitement I've kind of lost track myself. But with this being a .44 Magnum, the most powerful handgun in the world, and would blow your head clean off... you've got to ask yourself a question. Do I feel lucky? WELL DO YA, PUNK?!!!"- Harry Callahan(Dirty Harry) |
April 10, 2011, 10:34 PM | #6 |
Senior Member
Join Date: September 6, 2008
Posts: 1,777
|
These have to be clean for it to work consistently...
http://www.pbase.com/wrwood/image/58982059.jpg |
April 10, 2011, 10:57 PM | #7 |
Senior Member
Join Date: August 23, 2008
Location: SoCal
Posts: 6,442
|
The most common mistakes when cleaning the R-1100 have to due with the gas system. If the O-ring is questionable, replace it. If the gas system isn't clean and happy then the gun won't be happy and neither will you.
|
April 11, 2011, 07:53 AM | #8 |
Junior member
Join Date: April 18, 2008
Location: N. Central Florida
Posts: 8,518
|
To add one thing to Zippy's post - DON'T get oil on that o-ring, or you'll be replacing them more frequently - I learned that the hard way
|
April 11, 2011, 11:58 AM | #9 |
Senior Member
Join Date: August 23, 2008
Location: SoCal
Posts: 6,442
|
My friend, oneounceload, is correct. The O-ring is much happier if not swimming in oil. Also, the mag tube may be a weak link in the 1100's gas system: If it's over oiled it collects muck and it it's under oiled it corrodes -- clean it, oil it and wipe it. IIRC, one of the improvements in the 11-87 was changing the tube to stainless steel. Open the bolt and turn a freshly serviced 1100/11-87 end over end, you should hear the rings freely sliding by the force of gravity.
|
April 11, 2011, 12:18 PM | #10 |
Junior member
Join Date: April 18, 2008
Location: N. Central Florida
Posts: 8,518
|
When I had my 28n gauge 1100, the directions said to run it dry. Not listening is how I found out about the o-ring. But I also discovered using some Remington dry lube worked well with the brass gas piston parts
|
April 11, 2011, 02:24 PM | #11 |
Senior Member
Join Date: March 18, 2006
Location: Virginia
Posts: 423
|
So I have it all cleaned, except for the gas ports, and have a new o-ring installed. Thanks for the help.
Would any of this affect the firing mechanism? He said it wasn't jamming; the firing pin wasn't striking the round. He just assumed it was dirty. It would chamber a round and then "click" - misfire. This is from an estate sale collection and is a gun that got a lot of use. |
April 11, 2011, 03:32 PM | #12 |
Junior member
Join Date: April 18, 2008
Location: N. Central Florida
Posts: 8,518
|
Is the hammer dropping? You can see it inside the action spring up when you pull the trigger. Otherwise, when mine acted up, the firing pin retraction spring inside the bolt was broken - it is a small and fine spring. Three packs from Wolff aren't that expensive
|
April 11, 2011, 03:46 PM | #13 |
Senior Member
Join Date: March 18, 2006
Location: Virginia
Posts: 423
|
I will check the hammer tonight, but since it is an intermittent problem, I doubt it is broken.
|
April 11, 2011, 04:06 PM | #14 |
Junior member
Join Date: April 18, 2008
Location: N. Central Florida
Posts: 8,518
|
You can easily see the firing pin retraction spring when you take the chromed bolt out - just turn it over - I had one broken in three places that did the same thing - intermittently -
|
April 11, 2011, 05:56 PM | #15 |
Senior Member
Join Date: February 23, 2005
Posts: 13,195
|
All these gas gun issues / o-ring issues/cleaning out gas port talk ....just makes me want to go home and pet my Benelli Inertia guns a little ...
( Sorry, couldn't resist ) ........ but these guys will certainly help you out ..../ help you get it fixed ... |
April 11, 2011, 08:13 PM | #16 |
Senior Member
Join Date: December 17, 2007
Location: SOUTHEAST, OHIO
Posts: 5,970
|
If not a broken firing pin retraction spring.
Try spraying the firing pin channel with some brake cleaner. Using the plastic straw that comes with the brake cleaner makes it easier for pin-point application. Then, if you have access to an air compressor, blow out the channel with air. May be some old residue,gunk in the channel randomly hanging up the firing pin. |
|
|