The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools Search this Thread
Old January 16, 2016, 08:41 PM   #1
jal5
Senior Member
 
Join Date: January 12, 2009
Location: NE Ohio
Posts: 419
9mm Berrys 115 DS and Unique

Anyone using this combo? Looking for plinking load. Thinking of making up tests in 4.7 4.9 5.1 for my S&W Shield. I was shooting a lot of cast in it this summer but picked up a box of Berrys to try.
jal5 is offline  
Old January 17, 2016, 08:44 PM   #2
jal5
Senior Member
 
Join Date: January 12, 2009
Location: NE Ohio
Posts: 419
Lots of views but no ideas?
jal5 is offline  
Old January 17, 2016, 08:59 PM   #3
Kosh75287
Senior Member
 
Join Date: October 15, 2007
Posts: 820
It's the kind of thing that's very subject to variations as a function of the individual pistol. I'm not sure what "DS" means but Alliant lists 6.3/Unique/115 GDHP as max, so perhaps you should start your "ladder" of reloads at 5.1/Unique/115, and work upward from there? Since Berry's recommends using data for cast projectiles, I'm thinking your top end should be about 5.7/Unique/115, and I'd BET that accuracy improves as you go above 5.4/Unique, but don't be surprised if it does NOT.
__________________
GOD BLESS JEFF COOPER, whose instructions, consultations, and publications have probably saved more lives than can ever be reliably calculated. DVC, sir.

انجلو. المسلحة. جاهزة. Carpe SCOTCH!
Kosh75287 is offline  
Old January 18, 2016, 08:58 PM   #4
jal5
Senior Member
 
Join Date: January 12, 2009
Location: NE Ohio
Posts: 419
DS is double struck for Berrys. I did load some at 5.0 tonite and that was really full in the case but that flake powder can have room in the case. I screwed up the bell for the mouths so they were way too loose in the case. Will correct that and do it over.
jal5 is offline  
Old January 20, 2016, 06:30 PM   #5
showmebob
Member
 
Join Date: August 23, 2009
Posts: 20
Back when I was using Unique with Berrys 115gr rn plated my plinking load was 5.7 of Unique. BIL uses 5.6. I seat to 1.135 IIRC. I would not go higher if I was you.
showmebob is offline  
Old January 20, 2016, 07:02 PM   #6
std7mag
Senior Member
 
Join Date: June 23, 2013
Location: Central Taxylvania..
Posts: 3,609
Would depend what the barrel length is.

I'm using 115gr. Xtreme plated RN with either Unique or Red Dot.

Loaded up the Red Dot for my neighbors XDS 3.3.
Unique I use in friends Hi Power, and my 24/7 OSS.
std7mag is offline  
Old January 23, 2016, 11:07 AM   #7
jal5
Senior Member
 
Join Date: January 12, 2009
Location: NE Ohio
Posts: 419
Thx. Once this weather breaks I will give them a try. My goal is for plinking ammo for practice. I usually use my own cast boolits but found this box of Berrys that I forgot I had.
jal5 is offline  
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:19 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.03478 seconds with 8 queries