ohio gunsmith?

new_scopeshooter · April 28, 2012, 07:00 PM

does anyone know of a gunsmith in central ohio who can do a trigger job on a 1911?

Hunter Customs · April 28, 2012, 09:32 PM

Quote:

does anyone know of a gunsmith in central ohio who can do a trigger job on a 1911?

I don't know how far Medina Ohio is from you, that's where SDM Fabricating is located.
Scott could sure do you a trigger job.
Best Regards
Bob Hunter

new_scopeshooter · April 29, 2012, 07:48 PM

its about 2 to 2 1/2 hours away..... but would be worth the drive to have it done and check out his other work.. Thanks

Hunter Customs · April 30, 2012, 05:49 PM

I believe the last time I talked with Scott was at the Pin Nationals in Waterloo Iowa.
If you drive down to see him, tell him Bob Hunter said hello.
Best Regards
Bob Hunter

osufootball294 · May 1, 2012, 12:17 PM

Bob maroldy in gahanna does 1911 work, American Guncrafters is the name of his shop

new_scopeshooter · May 2, 2012, 07:36 PM

I called Scott. Real nice guy! he was honest and told me he was way behind and couldnt do the trigger job anytime soon. I found a shop called Gun Envy that said they could do it and have it back to me in about 3 days! Just droped it off! If it doesnt work out i will try the shop in Gahanna.
thanks for the help!

ohiomossyoak · May 2, 2012, 07:42 PM

There location?

new_scopeshooter · May 2, 2012, 08:24 PM

corner of indianola ave and cook rd in columbus...

sharpie443 · May 2, 2012, 10:54 PM

Tom Coal with cadiz gun works. he is in southern Ohio but you can find him at just about any gun show in Ohio. He also works with Chris Reed with ASA (American specialty ammo). The company i work for. Here is his website.

If you contact him let him know that Eric with ASA sent you to him. Might give me a deal on the 9mm conversion barrel I'm trying to get off of him.

http://www.cadizgunworks.com/

new_scopeshooter · May 7, 2012, 06:54 PM

Well i got my 1911 back today from gunenvy!!! Very pleased with the the out come. The trigger is breaking at a clean crisp 4 pounds. I will get it to the range sometime later this week!!!!!

April 28, 2012, 07:00 PM	#1
new_scopeshooter Senior Member Join Date: April 12, 2011 Location: central ohio Posts: 391	ohio gunsmith? does anyone know of a gunsmith in central ohio who can do a trigger job on a 1911?

May 2, 2012, 07:42 PM	#7
ohiomossyoak Senior Member Join Date: December 15, 2010 Location: East Central Ohio Posts: 143	There location? __________________ First it's pretty tires, then it's pretty guns and bows...next thing you know, you're shavin' your beard and wearin' capri pants

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

April 29, 2012, 07:48 PM	#3
new_scopeshooter Senior Member Join Date: April 12, 2011 Location: central ohio Posts: 391	its about 2 to 2 1/2 hours away..... but would be worth the drive to have it done and check out his other work.. Thanks

April 30, 2012, 05:49 PM	#4
Hunter Customs Senior Member Join Date: March 26, 2005 Location: Osborn, Missouri Posts: 2,697	I believe the last time I talked with Scott was at the Pin Nationals in Waterloo Iowa. If you drive down to see him, tell him Bob Hunter said hello. Best Regards Bob Hunter

May 1, 2012, 12:17 PM	#5
osufootball294 Junior Member Join Date: February 26, 2012 Posts: 1	Bob maroldy in gahanna does 1911 work, American Guncrafters is the name of his shop

May 2, 2012, 07:36 PM	#6
new_scopeshooter Senior Member Join Date: April 12, 2011 Location: central ohio Posts: 391	I called Scott. Real nice guy! he was honest and told me he was way behind and couldnt do the trigger job anytime soon. I found a shop called Gun Envy that said they could do it and have it back to me in about 3 days! Just droped it off! If it doesnt work out i will try the shop in Gahanna. thanks for the help!

May 2, 2012, 08:24 PM	#8
new_scopeshooter Senior Member Join Date: April 12, 2011 Location: central ohio Posts: 391	corner of indianola ave and cook rd in columbus...

May 2, 2012, 10:54 PM	#9
sharpie443 Member Join Date: March 25, 2012 Posts: 80	Tom Coal with cadiz gun works. he is in southern Ohio but you can find him at just about any gun show in Ohio. He also works with Chris Reed with ASA (American specialty ammo). The company i work for. Here is his website. If you contact him let him know that Eric with ASA sent you to him. Might give me a deal on the 9mm conversion barrel I'm trying to get off of him. http://www.cadizgunworks.com/

May 7, 2012, 06:54 PM	#10
new_scopeshooter Senior Member Join Date: April 12, 2011 Location: central ohio Posts: 391	Well i got my 1911 back today from gunenvy!!! Very pleased with the the out come. The trigger is breaking at a clean crisp 4 pounds. I will get it to the range sometime later this week!!!!!