The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Semi-automatic Forum

Reply
 
Thread Tools Search this Thread
Old September 10, 2011, 04:30 PM   #26
AZGlock13
Senior Member
 
Join Date: May 10, 2007
Location: AZ
Posts: 270
Another thumbs up for the Pearce +0 pinky extensions. I use the Pearce +0 extensions on my G26, G29 and G30 mags (of course those three different Glock mag types use three different Pearce part number extensions). I IWB conceal carry my G26, G29SF and G30 with the Pearce +0 extensions on and don't find that they make the gun print anymore than with the stock flush floor plates on the mags (IMHO, YMMV).
At one time I had both a G20 and a G29. I sold both of them off a few years ago. About a year ago I ended up buying a G29SF (I missed my G29 the most between it and my G20) and a Colt Delta Elite, I have no future plans on buying another G20 or G20SF, as my G29SF and Delta Elite have me covered 10mm wise.
AZGlock13 is offline  
Old September 10, 2011, 05:59 PM   #27
usmcfox
Junior Member
 
Join Date: September 9, 2011
Posts: 9
g20 barrel

Does anyone know if you can put the g20 barrels in the g29 ie the lone wolf 6 inch hunting barrel?
__________________
"I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes: If you f**k with me, I'll kill you all" -USMC General James Mattis
usmcfox is offline  
Old September 10, 2011, 07:48 PM   #28
Brian Pfleuger
Moderator Emeritus
 
Join Date: June 25, 2008
Location: Austin, CO
Posts: 19,578
Check Glockmeister, they have charts showing barrel swap and upper/lower compatibilities.

And one the "concealability", yes the G29 is slightly larger... I still consider it to be nearly identical in terms of concealibility. Considering that many guys conceal fat revolvers and full size 1911s, both of which are typically considerably larger and MUCH heavier, I consider the G29 to be HIGHLY concealable and the differences between it and the G33 to be almost trivial.
Brian Pfleuger is offline  
Old September 10, 2011, 08:15 PM   #29
AZGlock13
Senior Member
 
Join Date: May 10, 2007
Location: AZ
Posts: 270
I'm pretty sure you can't use a barrel made for the G20 (no matter what length or manufacture) in a G29. You might want to call Lone Wolf Dist. and see if they can make a 6" 10mm barrel for the G29 or not (they should know one way or the other if even possible).
AZGlock13 is offline  
Old September 10, 2011, 08:15 PM   #30
The_Shadow
Senior Member
 
Join Date: May 30, 2009
Location: Southeast LoUiSiAna
Posts: 188
The Glock 20 barrels are a little different in the locking lug area and are NOT swappable with the Glock 29!

The longest barrels I have seen for the G-29's are the Storm Lake 4.48" long.
__________________
TheSHADOW
The "10mm" I'm Packin', Has The Bullets Wackin', Smakin' & The Slide is Rackin' & Jackin'!
The_Shadow is offline  
Old September 10, 2011, 08:31 PM   #31
usmcfox
Junior Member
 
Join Date: September 9, 2011
Posts: 9
Still 4.48 is pretty decent but i think i`m going to go with the g29 seems like a nasty little firearm. and if I need more firepower than that that`s what the saigi 12 in the trunk is for. Thanks for all you`re input you guys are scholars and gentleman.
__________________
"I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes: If you f**k with me, I'll kill you all" -USMC General James Mattis
usmcfox is offline  
Old September 10, 2011, 08:33 PM   #32
Sharpsdressed Man
Junior member
 
Join Date: June 21, 2009
Location: NE Ohio
Posts: 1,176
Don't know if they still make them this long, but I have a 5" Bar Sto for the Glock 29.
Sharpsdressed Man is offline  
Old September 11, 2011, 04:44 PM   #33
Hammerhead
Senior Member
 
Join Date: May 31, 2004
Location: Minnesota
Posts: 2,432
Finally got around to taking a pic.
My gen 2.5 Glock 29 with .40 conversion. Shot this group today, typical for me, shot 4 into 3", the 5th opened it up to 4-3/4". 25 yards, KKM .40 match conversion, Rainier 165 plated flat point, 5.0 grains Universal, Winchester range brass (yes, I sort my brass)
Gun is stock except for sights. (Warren Sevigny competition w/fiber optic front)
Hammerhead is offline  
Reply

Tags
10mm , concealed carry , glock

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:40 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.04608 seconds with 10 queries