August 16, 2007, 03:47 PM | #1 |
Junior Member
Join Date: April 25, 2007
Posts: 12
|
Sticky Lapua brass
Has anyone ever run across 308 Lapua Brass being difficult to slip into the shell holder when it is brand new, never fired? I bought a box of 100 from Cabelas and was resizing them to make every thing uniform, a few needed triming, but when putting them into the shell holder for resizing, some where difficult to get in. I always heard good things about the Lapua brass
|
August 16, 2007, 03:49 PM | #2 |
Junior member
Join Date: November 25, 2002
Location: In my own little weird world in Anchorage, Alaska
Posts: 14,172
|
Got the right shell holder? I have no problem with the 308 brass at all
WildloveslapuaAlaska |
August 16, 2007, 04:41 PM | #3 |
Junior Member
Join Date: April 25, 2007
Posts: 12
|
Yes ..... Im pretty sure ...... I have been reloading, but I have been using Federal, Hornady and Winchester brass before, some of the Winchesters did the same thing as well as one or two of the Federal cases but I figured that was becuse of a previous hot loads causing the case to expand to much due to high pressure, these Lapua cases were brand new out of the box
|
August 16, 2007, 04:49 PM | #4 | |
Senior Member
Join Date: December 23, 2005
Location: Minnesota
Posts: 2,952
|
Quote:
|
|
August 16, 2007, 05:35 PM | #5 |
Junior Member
Join Date: April 25, 2007
Posts: 12
|
Its a C-H No-1 Shell Holder
|
August 16, 2007, 05:46 PM | #6 |
Junior member
Join Date: November 25, 2002
Location: In my own little weird world in Anchorage, Alaska
Posts: 14,172
|
Shell holder I reckon.
WildpickupanewoneAlaska TM |
August 16, 2007, 08:16 PM | #7 |
Senior Member
Join Date: November 20, 2006
Location: South Texas
Posts: 804
|
I've got several shell holders you can't get any case in. Sounds like yours may be a little too tight. If you want more shell holders that your 308 won't fit in, just PM me, I'll be glad to send 'em.
|
August 16, 2007, 09:57 PM | #8 |
Senior Member
Join Date: February 13, 2002
Location: Canada
Posts: 12,453
|
That's the correct shell holder. Brass can be slightly off size sometimes. Even Lapua.
|
August 17, 2007, 03:43 PM | #9 |
Senior Member
Join Date: February 5, 2007
Location: Monroeville, Alabama
Posts: 1,683
|
I had the same problem with some NORMA 9mm. Sometimes the exotic brands are made a little different from the "normal" brands. Do the regular brands fit OK? If so, may have to get another," looser" shellholder.
|
|
|