May 29, 1999, 08:01 PM | #1 |
Member
Join Date: October 18, 1998
Location: Denton NC USA
Posts: 93
|
I just purchased a mossberg 590A1 for home defense and would like to hear some suggestions on improvements. Sights, forend lights, slings etc. Also what do you use to clean your barrels? Any tips would be helpful thanks in advance, byerly.
|
May 29, 1999, 08:09 PM | #2 |
Junior member
Join Date: May 26, 1999
Posts: 380
|
Have you looked at www.vangcomp.com?
|
May 30, 1999, 07:35 AM | #3 |
Staff Alumnus
Join Date: May 2, 1999
Location: South Carolina
Posts: 3,611
|
Hi Byerly, I agree with Eric pretty much down the line. Probably the biggest thing most SG owners screw up is not shooting enough. Too many folks think the 30 inch pattern forms 4 feet in front of the muzzle.
I also agree bigtime with the light on the gun. If you ever want to see how well they work, just illuminate your self in a mirror late one night after your eyes have adjusted to a dark house. (umm - clear the gun first) I find that either the bronze wool that good woodworking shops sell or a "ChoreBoy" copper wool pan scrubber works well. Take an old bore brush and wrap the wool around it for a tight fit, lubricate the thing with a solvent and scrub away. You do have to dissassemble the ChoreBoy, just make sure you get the staples out. Works nicely on leaded pistol barrels also. Pay attention to the forcing cone area, that's where your wadding will leave the most residue. Giz [This message has been edited by Gizmo99 (edited May 30, 1999).] |
May 30, 1999, 07:30 PM | #4 |
Senior Member
Join Date: May 21, 1999
Location: Atlanta
Posts: 162
|
The comment to pattern your shotgun is right on the money. I've seen different loads average between 3 and 7 00 pellets in the 10 ring of a B-27 target at 20 yards from the same shotgun. Obviously, 7 is much better than three.
|
Thread Tools | Search this Thread |
|
|