|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
March 2, 2013, 02:57 PM | #1 |
Junior Member
Join Date: March 2, 2013
Posts: 7
|
Load data for. 40 with small rifle primers
Hi all I'm new here I am need of load data for. 40 Cal 165 grain tcfmj, Unique Powder and small rifle primers?
If anyone can help is greatly appreciate it. |
March 2, 2013, 04:33 PM | #2 |
Senior Member
Join Date: July 28, 2007
Location: Ohio
Posts: 11,756
|
Use the published load data you can already find for this load -- and using proper handloading techniques, reduce the MAXIMUM load by 10% and start there. If you wish to increase, do so while observing signs of pressure.
You will not likely find any load data for .40 S&W handloading that is specific for use with magnum or small rifle primers. That's not to say you can't do it. You simply aren't likely to find specific data for it.
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss. |
March 2, 2013, 06:32 PM | #3 |
Junior Member
Join Date: March 2, 2013
Posts: 7
|
Re: Load data for. 40 with small rifle primers
Thank you very much for your help
|
March 2, 2013, 08:40 PM | #4 |
Junior member
Join Date: December 20, 2012
Location: The "Gunshine State"
Posts: 1,981
|
Why not just place a back order and wait until you can get the proper components?
|
Thread Tools | Search this Thread |
|
|