August 12, 2012, 12:57 PM | #1 |
Member
Join Date: May 18, 2012
Location: Texas
Posts: 36
|
At the range
It is been a while since took my *stock Ruger 10/22 to the range so I decided to make a day of *it and went out to the PSC Shooting Club (one of the best ranges in Texas) with a mess of different types of ammo that I had been collecting over the years with the intention of shooting it all up
I did just that and had a blast. *I found my trusty rifle was shooting a little bit high and I proceeded to adjust the sites. The bar for mounting the scope was in the way - so I took it off. I adjusted the site and she is now shooting to point of aim at 25 yards with every brand of ammo that I took out there. I seem to remember sighting in at 50 yards -like 20 years ago when my eyes were a bit younger. Lol.* I need some help though , I need 4 short screws with large blued heads to fill the holes under where the bracket was, because the blue flaked off right at the thread holes. Not a lot, but noticeable *Where can I buy some ? *The screws used in the scope mounting bracket look really long, and I want to store them with the bracket.* Any links will be appreciated.* Regards all, and while I'm at it, thanks for such an informative and entertaining site.* |
August 12, 2012, 02:32 PM | #2 |
Senior Member
Join Date: November 12, 2006
Location: Pennsy
Posts: 720
|
www.brownells.com/
They have everything!
__________________
David NRA Benefactor Member Distinguished Rifleman #731 Presidents 100 |
August 12, 2012, 10:54 PM | #3 |
Senior Member
Join Date: August 19, 2001
Location: Texas
Posts: 811
|
I bought a set of four "blued" screws recently directly from Ruger.
|
Tags |
10/22 , ruger |
|
|