October 24, 2011, 07:13 PM | #1 |
Senior Member
Join Date: August 22, 2011
Location: WILDCAT COUNTRY!!
Posts: 208
|
Whats a good truck gun?
Looking for a good hunting rifle that I can just throw in the truck and not worry about dings scratches etc. I started a thread asking about the Henry Big Boy in .357 The more research I do on the Henry, the more they are looking like they would be good to shoot once in a while, but I would be afraid of scratching them up. I want a lever action in either .357/.38 or 30-30. I currently have a Marlin made 336w. Can't seem to find a pre-64 Winchester in 30-30 in my local pawn shops. I hear good things about Uberti and Cimmaron but they seem kind of pricey. Any Suggestions? Doesn't have to be new, used is fine and my price range is about $600-700
__________________
K............S............U.............WILDCATS!!!!!!!!! |
October 24, 2011, 07:33 PM | #2 |
Senior Member
Join Date: June 24, 2011
Posts: 230
|
30-30 would be a good choice.
Ammo for it is very everywhere! |
October 24, 2011, 07:34 PM | #3 |
Senior Member
Join Date: March 14, 2010
Location: Border of Idaho & Montana
Posts: 2,584
|
I like shooting my Marlin 1894CP. It holds 8+1 rounds and has a 16.25 inch barrel.
It is a very fun rifle... I think it would make a great truck gun. here is a link to one on gunbroker.com http://www.gunbroker.com/Auction/Vie...Item=256932728 The only thing I would change on mine is to get rid of the ports on the barrel.
__________________
Shot placement is everything! I would rather take a round of 50BMG to the foot than a 22short to the base of the skull. all 26 of my guns are 45/70 govt, 357 mag, 22 or 12 ga... I believe in keeping it simple. Wish my wife did as well... |
October 24, 2011, 08:09 PM | #4 |
Senior Member
Join Date: March 5, 2009
Location: Uh-Hi-O
Posts: 3,006
|
M2HB. Not to many trucks that won't stop.
__________________
"9mm has a very long history of being a pointy little bullet moving quickly" --Sevens |
October 24, 2011, 08:11 PM | #5 |
Junior member
Join Date: October 4, 2007
Location: All the way to NEBRASKA
Posts: 8,722
|
SKS- $200, low maintenance.
I would not leave a pre-64 Winchester out in the truck..... too spendy. |
October 24, 2011, 08:12 PM | #6 |
Senior Member
Join Date: June 23, 2011
Location: Illinois
Posts: 423
|
SKS would be pretty pro
Used beat up mini-30 mossberg shotgun, slugs, buck, whatever my opinions. |
October 24, 2011, 08:14 PM | #7 |
Member
Join Date: October 10, 2011
Location: Camp Lejeune, NC
Posts: 79
|
always in my truck when I had it was a Mossber 500 with alternating slgus and 00buck, ready for all, yielding to none. shell holder with the same had em color coded. cant go wrong. I know its not a rifle, if I had to have a rifle id make it a pawn shop haggle buy and prob wait for a 30-30, or if i wanted new id go for a new lever from mossberg in 30-30, or 45-70 which I dont think they make one or the other but thats my prefference.
__________________
To sum it up: Somewhere there is a TRUE BELIEVER training, he will not stop in his mission, he knows only the cause. What have you done today? For your brothers at arms, friends, family, your country, yourself? |
October 24, 2011, 08:17 PM | #8 |
Senior Member
Join Date: November 23, 2009
Posts: 3,963
|
Killing a truck takes .405 Winchester or better, such as .458 Magnum or Nitro Express.
For a cheap rifle to put in the cab, a .30/30 lever rifle should run about $300 or a bit more up here. Good cartridge, readily available, and it's not a pistol cartridge in a long barrel. If you really want to cheap out, get a Mosin-Nagant for ninety bucks, or a carbine for less than three hundred. |
October 24, 2011, 08:24 PM | #9 |
Senior Member
Join Date: November 14, 2010
Location: Northern Virginia
Posts: 1,824
|
I know you want a lever action, but I have to agree with the SKS. Although my truck has 4 legs and eats oats
__________________
Chief stall mucker and grain chef Country don't mean dumb. Steven King. The Stand |
October 24, 2011, 08:25 PM | #10 |
Senior Member
Join Date: October 20, 2011
Location: NY
Posts: 801
|
I own a remington gamemaster 7600 pump in 3006 and its a very reliable rifle. I highly reccomend this gun for your situatuion rifle sights or a scope. Take your pick
|
October 24, 2011, 08:27 PM | #11 |
Senior Member
Join Date: August 22, 2011
Location: WILDCAT COUNTRY!!
Posts: 208
|
Thanks for the replies. Around here (KS) most lever guns used are going for $600 or better. I wish I could find a safe queen lever action from the 50's or 60's in good condition. Ill keep my eyes open. I really like the 30-30. I wouldn't trade my Marlin for anything, and I have always wanted a Winchester. Not a new one, I believe they are made in Japan now. ( What would John Wayne think of this?) Seems all the good ole guns are either going over seas or are being ruined by other gun companies. Marlin, Winchester. What's the world coming to?
__________________
K............S............U.............WILDCATS!!!!!!!!! |
October 24, 2011, 09:52 PM | #12 |
Senior Member
Join Date: February 28, 2005
Location: Aridzona
Posts: 2,767
|
Used Marlin 336 or ca 1977/78-1981 (pre USRAC changeover) Win 94. The latter had finally started to right some of the earlier Post 64 wrongs--if not fully to Pre 64 levels, at least to levels of pride of ownership again--and you won't be beating up a Pre. Nothing beats a .30-30 levergun for handiness and overall goodness. Quite effective out to 150-175 with common ammo. A little farther claimed with the new(ish) Leverlution ammo.
EDIT: the above comments are for atruck gun that you still might admire outside the truck. But, just about any Post 64 Win (64-81) would do yeoman's duty as a "strictly" truck gun. Maybe the ultimate truck gun actually. Last edited by gak; October 24, 2011 at 09:59 PM. |
October 24, 2011, 10:04 PM | #13 |
Junior member
Join Date: July 21, 2011
Posts: 116
|
My friend has a Golden Boy, which scratches way too easy IMO. The regular finish Henry's hold up better but they will still scratch. The bottom line though is that any gun you carry around long enough will get scratched and beat up. I don't think you're likely to find a lever gun that fits your requirements to be honest. They generally cost more than most of us think is cheap enough to beat up.
To me that's where the SKS comes in. They're generally beat up when you buy them to a degree. But they are genuinely tough when it comes to finish or at least mine is. I have guns that scratch if you look at them sideways. Not my SKS though. It's been through heck for the 20 years or so that I've owned it and other than the marks I put around the lever to take apart the gas tube I don't have any marks at all that weren't there when I bought the rifle. You can get a SKS for $200-$250 if you look around but models at that price tend to be shot out, not taken care of bubba guns. For $300 you can get a much better level of quality. I don't know what people do to some of them because I don't clean mine all that often but I've seen examples that were flat out gummed up to the point of not working. I've shot thousands of rounds of corrosive ammo without a single problem. But some people do manage to get their SKS totally gunked up. You can either buy one and clean it extensively or you can buy one in better shape to start. To me the hours and hours of drudgery it takes to really re-work one. $50 doesn't go very far these days but it will get you a much better SKS in my experience. The SKS is known for it's ability to function under the worst conditions imaginable. The Viet Cong used them in their tunnels and in their streams and all through the jungle mud and water. That's some tough stuff for a rifle to work in. They work with dirt in them, they work with water in them and they work with dust in them. So chances are they will work when you need one. If I could carry a loaded, long gun in my vehicle in Ohio, it would be my SKS. |
October 24, 2011, 10:32 PM | #14 | |
Junior member
Join Date: October 4, 2007
Location: All the way to NEBRASKA
Posts: 8,722
|
Quote:
|
|
October 24, 2011, 10:36 PM | #15 |
Junior member
Join Date: April 3, 2010
Posts: 1,231
|
30-30 is a great truck gun in lever action, but mine will be a .44 magnum Winchester so that I can carry both handgun and lever rifle with the same ammo. Buffalo Bore has 305 gr cartridge at about 1800 fps out of a lever rifle which gives excellent power from a truck gun.
|
October 24, 2011, 11:00 PM | #16 |
Senior Member
Join Date: March 2, 2010
Location: Alabama
Posts: 868
|
Truck gun.....
Or "collectable gun"? Why would you want a pre-64 Winchester for a truck gun that will get "thrown in the truck" and scratched up? A Winchester in 30/30 or 44 or 357 will be a great truck gun - just get a newer version that will cost you 275-350. Any of those calibers would be ideal if you want to shoot an occasional deer/varmit/wild dog/two-legged vicious critter while in your truck.
J |
October 25, 2011, 12:22 AM | #17 |
Member
Join Date: April 10, 2008
Posts: 33
|
truck gun
|
October 25, 2011, 01:55 AM | #18 |
Senior Member
Join Date: May 4, 2010
Posts: 5,468
|
I'd go for the less expensive rossi in .44 magnum, personally, as opposed to the .357.
I'd also put ram line or other cheap stocks on it, to spare the wood. |
October 25, 2011, 08:11 AM | #19 |
Senior Member
Join Date: February 2, 2007
Location: Iowa
Posts: 2,676
|
Much confusion here....... $600-$700 on a truck gun? Not a chance when you can fill the same role for less than $300. You already have a Marlin 336 but are looking for something else? Heck, that gun is close to the top of the pick list for many gun owners.
Basically, about any gun available under $300 can fit your needs. Semi, bolt, single shot, shotgun, etc etc. You're stuck on a lever action and thats not a bad choice but you don't need a fancy reproduction or collectable Win 94 to fill you needs. Go shopping and grab the first well used .30-30 you see cheap. They are all over the place. LK |
October 25, 2011, 08:51 AM | #20 |
Senior Member
Join Date: February 11, 2010
Location: East Texas USA
Posts: 1,805
|
What about a surplus mauser like a VZ 24 or a Yugo 24 47 they are tough and fire a powerful cartridge.
|
October 25, 2011, 09:43 AM | #21 |
Senior Member
Join Date: June 24, 2011
Posts: 230
|
If you already have a Marlin 30-30, why anything else? I agree to go with a Yugo Mauser of some sort. Not a lot of money, but plenty of truck stopping power!
|
October 25, 2011, 11:47 AM | #22 |
Senior Member
Join Date: February 28, 2005
Location: Aridzona
Posts: 2,767
|
Jimbob86 wrote:
Gak wrote; Quote: Nothing beats a .30-30 levergun for handiness and overall goodness. NIMO. Maybe in yours. Jimbob, that was a real productive comment. Of course it was my opinion. Very little by anybody on these forums is anything but their opinion or experience. Does every statement have to be qualified with "IMO"? WT-?? |
October 25, 2011, 04:38 PM | #23 |
Senior Member
Join Date: February 8, 2010
Location: MN
Posts: 437
|
Look for a Glenfield 30. That was the less fancy version of Marlin's 336 if memory serves me correctly. They are found online fairly often for 200-300 dollars. Check them out!
|
October 25, 2011, 05:40 PM | #24 |
Senior Member
Join Date: August 22, 2011
Location: WILDCAT COUNTRY!!
Posts: 208
|
I guess I should clarify. My budget is $600-700 because that is what lever actions are going for in my area. I would love to pay only around $200-300. Problem is most pawn shops in my area want $500-600 for junk. My Marlin 336 is a great gun and would fit the bill as a truck gun, but I use it for deer hunting only. I keep a scope sighted in on the Marlin and after deer season, back in the safe it goes. The "truck gun" I am referring to will be more of an all-purpose gun. (Target shooting, hunting, and because I just want another lever action rifle.) The gun I have been trying to find is the Marlin 1894c in 357. Seems to be none around my area so Ill keep looking. A Winchester 94 in 30-30 would do nicely also.
__________________
K............S............U.............WILDCATS!!!!!!!!! |
October 25, 2011, 06:11 PM | #25 |
Senior Member
Join Date: June 24, 2011
Posts: 230
|
If everything in your area is overpriced by $300.00 give or take, then I would use $70.00 worth of gas and drive to lesser expensive gun shop or state to save $230.00.
|
Thread Tools | Search this Thread |
|
|