|
September 28, 2008, 07:27 PM
|
#1 |
|
Senior Member
Join Date: October 17, 2007
Location: Cowtown of course!
Posts: 1,747
|
Para LTC (PCX745E)
OK, I have no idea how I managed to do this, but I did.
I seem to have found a way to break the firing pin plunger lever on my Para LTC after firing 2 rounds. Here's the question, will the same part from a Colt M1991A1 work? Or do I need to contact Para to get the correct part. Do I really need to replace more parts than just the lever? Numrich doesn't have the part listed for a Para that I can fine.
__________________
NRA Chief Range Safety Officer, Home Firearms Safety, Pistol and Rifle Instructor “Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life......” President John F. Kennedy |
|
|
September 29, 2008, 01:14 PM
|
#2 |
|
Member
Join Date: August 21, 2008
Posts: 91
|
Send it back to Para.
Not too many parts are interchangable with a standard 1911. |
|
|
|
September 29, 2008, 04:21 PM
|
#3 |
|
Senior Member
Join Date: October 17, 2007
Location: Cowtown of course!
Posts: 1,747
|
Brownells is the official parts store for Para according to the service center.
And thank goodness they have the piece in stock and it's on it's way. So, if in need of any Para-Ordinance parts, check Brownells first.
__________________
NRA Chief Range Safety Officer, Home Firearms Safety, Pistol and Rifle Instructor “Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life......” President John F. Kennedy |
|
|
 |
| Thread Tools | Search this Thread |
|
|
