|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
December 9, 2012, 11:18 PM | #1 |
Senior Member
Join Date: October 19, 2008
Posts: 635
|
S&W Aluminum Cylinder Coating
Hey all,
I have a S&W m17 with the aluminum cylinder. The gun is in great mechanical shape, but the bluing is wearing, making the cylinder look darker than much of the gun, and the cylinder is showing some slight chipping as well. I've been thinking about resurfacing. I don't see how the color of the cylinder will match if I get the gun reblued. I was thinking about either getting the whole thing chrome or nickle plated, or maybe just the cylinder with a reblue of the rest of the gun--if I'm going to have a two tone revolver, I'd rather have a shinny cylinder and a blue frame than two mismatched blues. Anyway, the question is, can an aluminimum cylinder be chrome or nickle plated with long lasting results? Thanks, |
December 9, 2012, 11:31 PM | #2 |
Staff
Join Date: February 12, 2001
Location: DFW Area
Posts: 24,972
|
I know that NP3, a metallic plating consisting of electroless nickel & teflon, can be applied directly to aluminum. I assume that electroless nickel can be as well.
__________________
Do you know about the TEXAS State Rifle Association?
|
December 10, 2012, 12:23 AM | #3 |
Senior Member
Join Date: April 7, 2006
Posts: 10,981
|
Both can be applied to aluminum. A special treatment is required first.
|
December 10, 2012, 12:53 AM | #4 |
Staff
Join Date: February 12, 2001
Location: DFW Area
Posts: 24,972
|
What sort of treatment?
__________________
Do you know about the TEXAS State Rifle Association?
|
December 10, 2012, 01:03 PM | #5 |
Senior Member
Join Date: October 19, 2008
Posts: 635
|
If it weren't for the cylinder, I would not worry about it, but the two shades of blue annoy me, and I worry about the wear and tear on the aluminum surfaces of the cylinder. I've never had anything chromed, so maybe this is my opportunity.
|
December 10, 2012, 04:20 PM | #6 |
Senior Member
Join Date: April 7, 2006
Posts: 10,981
|
Usually a zincate coating is applied to the aluminum to prevent oxidizing. The slightly acidic nickel solution eats the zincate away, exposing fresh aluminum and plating it.
|
December 10, 2012, 11:14 PM | #7 |
Staff
Join Date: February 12, 2001
Location: DFW Area
Posts: 24,972
|
Interesting. I knew that a copper plate was required prior to some types of plating, but what you're talking about is almost like a primer/prep coat that disappears as the nickel attaches.
Neat stuff.
__________________
Do you know about the TEXAS State Rifle Association?
|
December 10, 2012, 11:22 PM | #8 |
Senior Member
Join Date: September 9, 2009
Location: South Florida
Posts: 1,560
|
An aluminum Cylinder?... are there any unusual markings on the gun? If your correct... That may be a bit of a rare piece. I suggest you check with someone on the S&W forum... and dont do anything to the gun.
|
December 11, 2012, 02:16 AM | #9 |
Senior Member
Join Date: April 7, 2006
Posts: 10,981
|
John,
That's exactly what it is. |
December 11, 2012, 06:40 AM | #10 | |
Senior Member
Join Date: October 19, 2008
Posts: 635
|
Quote:
|
|
|
|