|
June 1, 2000, 01:07 PM
|
#1 |
|
Member
Join Date: January 11, 2000
Location: Miami, Florida, USA
Posts: 39
|
I need a load for .223 with a 60 gr bullet using Varget.
The manuals I have don't show a load for 60 gr using Varget. If anyone has the Hodgdon or Hornady, manual that shows this load, Ill really appreciate if you can post the starting and max load. Thanks, Best of luck....Cag |
|
|
June 1, 2000, 01:22 PM
|
#2 |
|
Senior Member
Join Date: January 12, 1999
Location: Mississippi
Posts: 1,004
|
Cag, I'm looking at a can of Varget now. May or may not help you, but max load in .223rem, 55gr SP is 27.5grs, vel given at 3384fps. HTH
|
|
|
|
June 1, 2000, 03:06 PM
|
#3 |
|
Member
Join Date: January 11, 2000
Location: Miami, Florida, USA
Posts: 39
|
bk40, Thanks. I have a load for 55 grs. It's 60 grs. that I'm looking for. I think that there might be some difference.
Best of luck....Cag |
|
|
|
June 2, 2000, 01:36 AM
|
#4 |
|
Member
Join Date: May 17, 2000
Location: Sac,Ca,USA
Posts: 68
|
I checked out their web site at www.Hodgdon.com. but I could not find any 60 grain listed. Neither is Varget listed for 60 grain in the Lee or Sierra manual. You can try calling the Sierra reloading hotline at 1-800-223-8799 they might be able to help.
Good luck. sgtar15 |
|
|
|
June 2, 2000, 09:21 AM
|
#5 |
|
Member
Join Date: January 11, 2000
Location: Miami, Florida, USA
Posts: 39
|
sgtar15, Thanks for your help. I'm getting some load data from Hornady. I sent them an e mail and they are going to mail me some data. I also got a load at another board from a Hornady manual. I appreciate your help and once again thanks.
Best of luck....Cag |
|
|
|
June 4, 2000, 08:14 AM
|
#6 |
|
Member
Join Date: April 8, 2000
Posts: 29
|
Cag,
Just looked in Hodgdon's No 27 Data Manual, and they show 24.5 grains of Varget for 63 grain SIE.SP bullet with a Win SR primer. MV 3000 fps, Max load is 26.4 with a MV of 3199 fps. This is the only load they show for any bullet weight that is close to your rqmt of 60grains with Varget. They do show a couple of loads for a 60 grain SIE HPBT bullet, but they are using Reloader 12 & 15. Hope this helps. Mel <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by *Cag: I need a load for .223 with a 60 gr bullet using Varget. The manuals I have don't show a load for 60 gr using Varget. If anyone has the Hodgdon or Hornady, manual that shows this load, Ill really appreciate if you can post the starting and max load. Thanks, Best of luck....Cag[/quote] ------------------ |
|
|
 |
|
|
