Ithaca 37 clone

ebutler462 · January 18, 2010, 10:44 AM

Anyone know where it is made? China, maybe?

http://www.savagearms.com/firearms/m...ns350pumpfield

$267. Gotta be China or Turkey.

oletymer · January 18, 2010, 11:18 AM

As a hint, if you buy two you get eggroll.

jlv08 · January 18, 2010, 11:43 AM

correctionsIt is probably made by Norinco. They also make the NEF Pardner Pump shotgun which is a loose reproduction od the venerable Remington 870

There has been some spirited discussion about the NEF Pardner and the Hawk and Interstate variants.

I have a Pardner Pump 20ga. Compact and love the gun.

I had the 12 ga. Pardner in walnut and matte blue and it was real nice and shot well.

It was 28 inch barrel and was a hoss of a gun and more gun than I wanted to carry and I sold it to a friend. He's very happy with it.

I like the 20 as it is easier to tote and I'm not undergunned afield with the right loads. I have other 12 ga. shotguns for times where a 12 is needed.

The Stevens is obviously a Norinco reproduction of the Ithaca model 37.

The Ithaca model 37 is a reproduction of the Remington model 17.

I would like to check one out and if it is like the earlier version Norinco made, it ought to be a pretty good gun.

jlv08 · January 18, 2010, 11:46 AM

Just to add, when I bought my Pardner Pump, I didn't get any egg rolls, just a decent shotgun.

bigwrench · January 18, 2010, 11:52 AM

Well stevens rifles are inexpensive and american made. Maybe these pump guns are that way to. By the way did anyone notice the slide is on the opposite side of the gun compared to the ithica? Or maybe this is a double slide.

kozak6 · January 18, 2010, 10:04 PM

For some reason, the Chinese Ithaca copies have double action bars.

MAX100 · January 18, 2010, 11:51 PM

It's probably made in china by the same company that made the IAC Ithaca 37 copy that was was imported few years ago.

Stevens 350

IAC 37 copy. They look very similar. It's very well made as you can see by the picture. I would like to have the one had, back.

GC

January 18, 2010, 10:44 AM	#1
ebutler462 Senior Member Join Date: March 16, 2007 Location: NC Posts: 437	Ithaca 37 clone Anyone know where it is made? China, maybe? http://www.savagearms.com/firearms/m...ns350pumpfield $267. Gotta be China or Turkey.

January 18, 2010, 11:43 AM	#3
jlv08 Senior Member Join Date: October 25, 2008 Posts: 122	correctionsIt is probably made by Norinco. They also make the NEF Pardner Pump shotgun which is a loose reproduction od the venerable Remington 870 There has been some spirited discussion about the NEF Pardner and the Hawk and Interstate variants. I have a Pardner Pump 20ga. Compact and love the gun. I had the 12 ga. Pardner in walnut and matte blue and it was real nice and shot well. It was 28 inch barrel and was a hoss of a gun and more gun than I wanted to carry and I sold it to a friend. He's very happy with it. I like the 20 as it is easier to tote and I'm not undergunned afield with the right loads. I have other 12 ga. shotguns for times where a 12 is needed. The Stevens is obviously a Norinco reproduction of the Ithaca model 37. The Ithaca model 37 is a reproduction of the Remington model 17. I would like to check one out and if it is like the earlier version Norinco made, it ought to be a pretty good gun. Last edited by jlv08; January 18, 2010 at 11:44 AM. Reason: corrections

January 18, 2010, 11:51 PM	#7
MAX100 Senior Member Join Date: February 28, 2008 Location: SC- at the GUN-CONNECTION Posts: 359	It's probably made in china by the same company that made the IAC Ithaca 37 copy that was was imported few years ago. Stevens 350 IAC 37 copy. They look very similar. It's very well made as you can see by the picture. I would like to have the one had, back. GC __________________ ==GUN CONNECTION== [email protected]

January 18, 2010, 11:18 AM	#2
oletymer Senior Member Join Date: September 9, 2005 Posts: 338	As a hint, if you buy two you get eggroll.

January 18, 2010, 11:46 AM	#4
jlv08 Senior Member Join Date: October 25, 2008 Posts: 122	Just to add, when I bought my Pardner Pump, I didn't get any egg rolls, just a decent shotgun.

January 18, 2010, 11:52 AM	#5
bigwrench Senior Member Join Date: December 23, 2009 Location: foot of the uintas Posts: 148	Well stevens rifles are inexpensive and american made. Maybe these pump guns are that way to. By the way did anyone notice the slide is on the opposite side of the gun compared to the ithica? Or maybe this is a double slide.

January 18, 2010, 10:04 PM	#6
kozak6 Senior Member Join Date: June 16, 2005 Location: AZ Posts: 3,113	For some reason, the Chinese Ithaca copies have double action bars.