|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
March 11, 2006, 11:34 AM | #1 |
Junior Member
Join Date: March 11, 2006
Posts: 2
|
Remington nylon 66/ FNG
new guy here, first post and its a question..........sorry.
I have aquired a Remington nylon 66, the previous owner had tried to take it apart but could not do it and he gave up on it, it looks like he took everything off it he could without removing the cocking handle, and there are bits rattling in the reciever area, one piece looks looks like a flat spring? Are there instructions available for the take down of this rifle? Great looking site here, Im off for a good look around, I am active on a couple of forums and have quite a few miltary surplus rifles, both bolt action and semi. Love the 7.62x51 rifles the best.thanks for any info Guys, Rob, aka Jagman |
March 11, 2006, 12:18 PM | #2 |
Staff In Memoriam
Join Date: January 8, 1999
Location: Brunswick,GA USA
Posts: 1,884
|
Sent by separate email
HJN |
March 11, 2006, 12:47 PM | #3 |
Junior Member
Join Date: March 11, 2006
Posts: 2
|
WOW ! thank you very much for the amazingly quick response, that is perfect. i dont think I could have got very far without it to be honest, thanks again and look forward to particpating on these boards.Jagman
|
April 3, 2006, 05:00 PM | #4 |
Junior Member
Join Date: April 3, 2006
Posts: 2
|
Nylon 66
I too have a Nylon 66 that was given to me in pieces. Could one of you Gentlemen send me some instructions. Thanks.
|
April 15, 2006, 08:32 PM | #5 |
Junior Member
Join Date: April 15, 2006
Posts: 2
|
i also have a problem
I too have a Nylon 66 that was given to me in pieces. Could one of you Gentlemen send me some instructions. Thanks and best regards
[email protected] |
|
|