November 9, 2007, 01:12 PM | #1 |
Junior member
Join Date: November 9, 2007
Location: Montana
Posts: 8
|
Help please!
http://www.thefiringline.com/forums/...d.php?t=267827
I made the thread in that area but I found this one and figured it'd be better put here. |
November 9, 2007, 01:41 PM | #2 |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
|
The cylinder latch is the checkered metal button on the left side of the frame. Push the latch forward, the cylinder should open. If it won't open, don't try to force it, just spray some solvent on it and give it some time to work, then try again.
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
November 9, 2007, 05:41 PM | #3 |
Senior Member
Join Date: June 4, 2006
Location: West Virginia
Posts: 2,258
|
I would take it to a gun smith and have them go through it, give it a good cleaning and have him let you know if they think it is safe to shoot.
Rusty
__________________
I don't ever remember being absent minded. |
November 9, 2007, 06:08 PM | #4 |
Junior member
Join Date: November 9, 2007
Location: Montana
Posts: 8
|
i got it open [i figured it out]
thanks, a gun smith.. *searches* |
November 9, 2007, 07:35 PM | #5 |
Moderator Emeritus
Join Date: June 29, 2000
Location: Rupert, Idaho
Posts: 9,660
|
Actually, your other thread was just fine in the revolver section.
I'm closing this one. |
|
|