|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
June 25, 2008, 04:53 PM | #1 |
Senior Member
Join Date: May 3, 2008
Posts: 3,057
|
Help a Newbie - Cap n Ball
I own a lot more hunting rifles and shotguns than I do pistols in general, and out of that the only Revolver I own is a SW m60 snub nose. I also loved the way the old Colts looked but being a college student I can't afford one. I stumbled onto this on Buds and was interested in how they were.
http://www.budsgunshop.com/catalog/p...ducts_id/39417 The price seems really cheap, and I do want a shooter I can have some fun at the range with, not a safe queen. I was also wondering since I never really used a black powder gun before (I have fired one) what components and everything I would need for this pistol. I.E. some cheap target bullets, I'm assuming ignition caps, powder ect.. Any information on how exactly these work would be great really. This seems like a gun that would be fun to take to the range when I'm bored with all the semi-autos, so if any of you own one, please share any info. |
June 25, 2008, 07:53 PM | #2 |
Senior Member
Join Date: December 14, 2004
Location: Northern Indiana
Posts: 6,117
|
I have never shot one but I have handled one. There good guns. Any of the Italian built cap and ball revolvers are good shooters.
Personally I prefer the newer version with round barrel and more graceful lines and fluted cylinders like the 1860 army or 61 navy. My only suggestion is that at $200 it seems a little pricy. Go to a gun show near where you live. There are always good (and better) prices and you can find one you might like better. Just remember read the instructions for loading. Multiple chambers firing are a possibility if you don’t grease the chambers and that’s one thing you don’t want to experience. I would also suggest you ask the same question in the black powder section of this forum, you might get more answers. I have been shooting C&B for over 30 years and I have 12 in my collection. From little 32 cal to Dragoons. Several, I have matched pairs. If you want to look at high end C&P or all the different models, go here. http://www.uberti.com/ |
June 25, 2008, 08:03 PM | #3 |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,189
|
Cabela's has the same gun for 139.99. It's not historically correct tho. Colt never made a 51 navy in .44, that's a fantasy gun dreamed up by Pietta. IMHO you'll be happier with a steel frame.
Drop down to the black powder forum and read the sticky and peruse the threads there. You'll find a lot of useful information and more folks that are knowledgeable about bp guns. |
June 25, 2008, 08:51 PM | #4 |
Senior Member
Join Date: January 9, 2007
Posts: 1,007
|
BP guns are a lot of work for a little shooting. Also they are high maintenance and need to be meticulously cleaned after every use. Otherwise they rust to pieces. That said, I've had a lot of fun shooting them years ago when I was too young to buy a centerfire gun. They're fun but are a lot of work.
|
June 26, 2008, 12:02 AM | #5 | |
Senior Member
Join Date: March 19, 2008
Location: High & Dry in Missouri Ozarks
Posts: 2,113
|
Quote:
Cabelas is a good place to get started. A steel framed pistol with a starter kit is an inexpensive way to get started. I'll second Hawg's suggestion about perusing the BP threads. here are a few other good references sources: http://www.cascity.com/forumhall/ind...oard,19.0.html http://www.theopenrange.net/forum/index.php?board=18.0 http://www.jspublications.net/tips/BPLoading.pdf http://www.curtrich.com/frontiersmen.html
__________________
Fingers (Show Me MO smoke) McGee - AKA Man of Many Colts - Alter ego of Diabolical Ken; SASS Regulator 28564-L-TG; Rangemaster and stage writer extraordinaire; Frontiersman, Pistoleer, NRA Endowment Life, NMLRA, SAF, CCRKBA, STORM 327, SV115; Charter member, Central Ozarks Western Shooters Cynic: A blackguard whose faulty vision see things as they are, not as they should be. Ambrose Bierce |
|
June 26, 2008, 12:10 AM | #6 |
Senior Member
Join Date: May 3, 2008
Posts: 3,057
|
Thx for all the info so far, wasn't really sure where to post this so i went with revolvers but the mod moved it I believe Even if the guns do need a lot of cleaning and care I love that. I can't think of anything more relaxing than cleaning my guns. I did look around and noticed the price was high compared to other sources. I understand they might take awhile to prepare to shoot, but I'm looking for something like that, I like to go to the range for extended periods of time, but can only afford so much 9mm, .38spl, and rifle ammo.
|
June 26, 2008, 03:52 AM | #7 | |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,189
|
Quote:
I use Pyrodex which is supposedly more corrosive than bp and I frequently go two or three days without cleaning and have gone as many as nine. I also live in the humid South. No rust or corrosion. I only tear mine completely down maybe once a year. |
|
June 26, 2008, 04:31 AM | #8 | ||
Senior Member
Join Date: December 4, 2005
Location: Mojave Desert, CA
Posts: 1,195
|
Well not total
Quote:
Quote:
It ain't exactly Rocket Science, but 's kinda. I can say that I clean my Revs if I shoot 6, or 60 rounds, or or 200 in each Rev on a given day. I figure it like brushin' my teeth after dessert...as long as i'm not too tired. I clean um up that day, and ifin I had shot so many I din't get the Boltspring, bolt, trigger, hammer, pawl(hand), hammer and cones remove that day. I'd do it the next day for sure. My Uncle Sam taught me like that and I'm still here to tell ya. It's a little work if you want um clean and to last but worth it for the fun you have and they work like a Swiss Clock. Anyway...how ever you wanna see it I guess. This is only how I like to do it. SG
__________________
"I Smoke Black Powder" "Favor an 1858 Remington" SGT. Smokin' Gun, Mosby's Rangers 43rd Virginia Cavalry C.S.A. SASS# 19634, ... Admin:http://blackpowdersmoke.com/oldcoots/index.php |
||
June 26, 2008, 06:10 AM | #9 | |
Senior Member
Join Date: December 27, 2005
Location: northeast
Posts: 521
|
Quote:
If you're ever in the Hartford, CT area, check out this collection. It's free to the public. |
|
June 26, 2008, 07:37 AM | #10 |
Junior member
Join Date: January 26, 2007
Location: South-Western North Carolina
Posts: 1,124
|
if you check around some you'll find a better price than that. they are some work to clean but don't let that put ya off of 'em, lots of fun! I use windsheild washer fluid in a spray bottle to soak mine with - be liberal in spraying on. let it soak and repeat than take down and scrub, rinse w/hot water and dry then spray with ballistol or similar. MAKE SURE YOU HAVE PROPER SIZE CAPS. to avoid flash-over chainfires.
|
June 26, 2008, 09:33 AM | #11 |
Senior Member
Join Date: July 23, 2007
Location: Virginia
Posts: 719
|
For more than 26 years I'ved enjoyed shooting C&B revolvers & the pleasure of shooting them is by far more than I have with any of my more modern semi autos or revolvers, & cleaning has always been short & sweet.
After shooting I simply keep Balistol in a spray bottle to spray over & into the weapon to soak, when I get home I remove the cylinder & the nipples, the wood grip's & place all the metal parts into a 5 gallon bucket of Hot soapy water clean the bore, chambers & nipples of fouling & spray the internals "through the opening of the grip area" & then lube as usual, reassemble & I'm done. About once every 6-9 months I may total strip my pieces but in the 26 years I've never had any issues from my cleaning method but as with any mechanical device I have had some minor part failures that is to be expected from thousands of shots from these fine weapons by design. |
June 26, 2008, 01:35 PM | #12 | |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,189
|
Yep total.
Quote:
I fired one with 40 grs. of Pyrodex and let it sit for nine days and it didn't rust. The chambers and bore started to show a white film like lead oxidation at the end of nine days so I went ahead and cleaned it. |
|
June 26, 2008, 04:14 PM | #13 |
Senior Member
Join Date: May 17, 2007
Location: Vancouver, WA
Posts: 366
|
The price is high for a brass framed '51. I bought a steel framed one for $165.00 new from the Possibles Shop http://www.possibleshop.com/cap-ball-closeout.htm
A new brass framed '51 is $140.00 or a better gun for the beginner is an 1868 Remington is $200.00 at Cabelas. I wouldn't buy the one from Bud's. |
June 26, 2008, 04:29 PM | #14 | |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,189
|
Quote:
|
|
June 26, 2008, 06:59 PM | #15 |
Senior Member
Join Date: October 8, 2006
Location: Northern Michigan
Posts: 2,772
|
I recall that prototype had an 8" barrel - it could just as well be called an 1860 Army with an octagonal barrel rather than an 1851 Navy in .44 cal.
We can certainly say Colt never PRODUCED an 1851 Navy in .44 cal, if that makes anyone feel better. |
June 27, 2008, 05:44 AM | #16 |
Senior Member
Join Date: December 27, 2005
Location: northeast
Posts: 521
|
The prototypes were patented so you cannot say Colt never made a Navy in .44. Maybe calling it a Navy, a term that was basically a marketing tool, is not correct. I'd say a revolver with an octagonal barrel and hinged loading lever in .44 was a natural progression from the .44 Dragoon to the 1851 .36 Navy, then back up to the 1860 .44.
I've seen them so you can't tell me they didn't exist. How many were made we can't tell - the records burned with the factory in the early 1860s. Is Pietta overly concerned with historical accuracy? Not from what I've seen. I used to be anti-Pietta when it came to some of their models, but I'm in the mindset now that if it's fun and functional, it' legitimate. It's like the Ruger Old Army, a revolver that draws its design from several guns, a revolver that has no real historical accuracy, but probably the best black powder revolver ever made. |
June 27, 2008, 03:52 PM | #17 | |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,189
|
Quote:
|
|
June 27, 2008, 04:08 PM | #18 |
Senior Member
Join Date: May 3, 2008
Posts: 3,057
|
What do you guys think about this.
http://www.cabelas.com/cabelas/en/te...817&hasJS=true I know a lot of people said get a steel frame but i really like the way the Brass looks, don't ask me why. As far as being accurate historically I'm not worried about it. I just want a simple shooter I like the looks and price of, maybe when I'm out of college and working full time I'll invest is a Colt, but for now, I just like supporting my 2nd amendment right and having good fun being a responsible person weather the Liberal media agrees or not. Another question I had was how much do Caps and Powder usually run, I'm at my college house now so cant get to my local shop to check it out myself because its 3 hours away. Is it cheaper to shoot than center fire rounds, more expensive, about par? |
June 27, 2008, 08:59 PM | #19 |
Senior Member
Join Date: December 27, 2005
Location: northeast
Posts: 521
|
Brass framed guns, especially .44, take a beating over time, especially if it's your only gun. I'd suggest getting the same gun in .36 if you like the brass - just don't use large loads. Plus, .36 will save you lead and powder. Caps and powder might be a problem if you're at a school. You can order powder online but most places require a purchase of at least 5 lbs. Caps can be expensive with shipping and handling charges, too.
What state are you in? Oh yeah - Cabelas went too far with that one - even the South didn't make a .44 in brass that I know of. They made the Spiller & Burr and the Griswold & Gunnison in brass, both in .36 caliber. |
June 27, 2008, 09:39 PM | #20 | |
Senior Member
Join Date: July 23, 2007
Location: Virginia
Posts: 719
|
Quote:
Now as far as the brass framed revolver that you like from Cabelas, Pohill I think you mean Pietta not Cabelas because that is who make 98% of the C&B revolvers for Cabelas but for the most part you are correct that Colt did in fact not make a 1851 Navy in a brass frame & especially not in .44 caliber but I think I had seen one variant that was manufactured during the War of Northern Aggression that was similar to the Colt 51 with a Brass frame from one of the many facilities in the south. Now to the OP: If you are stuck in getting a Brass framed C&B revolver please keep the loads around 20gr. max of FFFG gun powder to keep the weapon around for some time because after a while the brass will tend to stretch & fatigue from normal use of full house loads. Also being in college, please I hope that you are living in off campus quarters because there may be some rules against firearms possession while on the campus property. |
|
June 27, 2008, 09:49 PM | #21 | |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,189
|
Quote:
|
|
June 27, 2008, 10:07 PM | #22 | |
Senior Member
Join Date: December 27, 2005
Location: northeast
Posts: 521
|
Quote:
As far as a Ruger Old Army playing to be a C&B revolver...now that really puzzles me. But, to each his own. I was very against Rugers until I got one. The South copied the Whitney to make the Spiller & Burr in brass, they copied the Colt 1851 Navy to make the Griswold & Gunnison in brass with a round barrel. And I'm sure there were others. |
|
June 27, 2008, 11:47 PM | #23 | |
Senior Member
Join Date: December 4, 2005
Location: Mojave Desert, CA
Posts: 1,195
|
Quote:
SG
__________________
"I Smoke Black Powder" "Favor an 1858 Remington" SGT. Smokin' Gun, Mosby's Rangers 43rd Virginia Cavalry C.S.A. SASS# 19634, ... Admin:http://blackpowdersmoke.com/oldcoots/index.php Last edited by Smokin_Gun; June 29, 2008 at 11:10 PM. |
|
June 29, 2008, 07:02 PM | #24 |
Senior Member
Join Date: May 3, 2008
Posts: 3,057
|
Yes I do live off campus, obviously I would never bring a firearm near it. The only gun I keep in my house at school (my house is in the town I walk to class) is my PM-9 for conceal carry when I walk somewhere at night. My g/f doesn't live in a nice part of town, and she maybe weighs 100 pounds so I keep one of my CCW guns down here in case we walk to her place (also she doesn't live on campus)
I don't know why I like the brass frame more but maybe I will get steel to be on the safe side. I'm torn between buying one of these or a Ruger Mark II .22 at the moment. Decisions Decisions I think we Americans are spoiled, we get to many choices. |
June 29, 2008, 10:42 PM | #25 | |
Senior Member
Join Date: March 15, 2005
Location: Central Connecticut
Posts: 3,166
|
Quote:
At $20 per lb., the cost would be .07 cents per shot. Round balls cost about $9 per 100 or .09 cents each. Percussion caps cost about .04 -.05 cents each. Then most people use some Bore Butter or Crisco over the loaded balls, or lube pills under the balls. Some use bore button wool wads (at .08 - .10 cents each). There's also the cost of cleaning & loading accessories, wrench, nipples, nipple pick, flask, capper, measure etc... You're looking at a minimum of about .20 cents a shot which isn't much different than shooting a 9mm or even a .45 ACP. I know that some will say that powder is cheaper, but I'm talking about the average price of powder, whether it's 777, Pyrodex or real BP. BP costs well over $20 per lb. around here, and so does 777. APP is $18 - $20+. Maybe $2 can be saved by buying Pyrodex, but you need gas to drive around buying the stuff. Sure you can cast your own round balls, but that's another investment cost too. Don't blame the messenger for saying this, but on average BP pistols usually require more replacement parts than smokeless guns do which is another expense. Plus their resale and trade in values do go down more than a Ruger MK III's would, especially a brass frame model. The back of the brass frame gets battered due to the cylinder hitting it from the recoil of each shot and the brass shows more wear over time. On the other hand, one round of Federal .22 bulk ammo from Walmart costs about 2.5 cents. Shooting one 10 round magazine costs .25 cents, and shooting 10 full magazines per hour costs $2.50 per hour. That same $2.50 is equal to shooting about 2 full cylinders out of a .44 C&B revolver or about 12 shots worth. Last edited by arcticap; June 30, 2008 at 12:38 PM. |
|
|
|