holster makers for sig 239 and mag pouch

UniversalFrost · May 1, 2007, 10:29 PM

Yes, I know there are several of the custom holster makers out there on the forum and I am looking for you to let me know what you offer (prices included) for a plain brown leather IWB CCW holster and a matching double mag pouch for a sig p239. I prefer either a metal clip or leather straps with metal snaps.

Also, let me know the wait times. I am expecting to place the order sometime this weekend and would like to get it delivered no later than 10 weeks (sooner the better).

Travismaine · May 2, 2007, 12:09 AM

Call Milt Sparks. I have several of there holsters and have never had a problem I also have two made by Alessi that are of equal quality. Milt Sparks has wait times of up to two months at times.

nemesis · May 2, 2007, 04:17 PM

Probably need to clarify a few details for those custom guys.

1. Horsehide or cowhide?

2. Right hand or left?

3. Tuckable or not tuckable?

4. Is that for 9mm or 357/40?

5. Do you want the holster vertical or with a forward cant/rake?

Regarding the double mag carrier..........

1. Is that for 9mm or 357/40?

2. Do you want conventional OWB or IWB?

3. Do you want your magazines oriented horizontal or vertical?

4. Do you want an open top or flapped closure style?

UniversalFrost · May 2, 2007, 10:27 PM

I want the normal brown cowhide and a vertical cant or tilted forward cant, right hand, tuckable would be good, but a not tuckable version is just as good. The mag holder and the holster are for the .40 version. Also want open top vertical orientation for the mag holder. would like a tension adjustment for both the mag holder and the holster. I also want IWB for the hoster, but the mag holder can be iwb or owb (iwb prefered).

Rinspeed · May 9, 2007, 08:40 AM

The Alessi Talon PLus is an awesome holster for around $60. Only problem is they, as well as Milt Sparks, are very busy. They are worth the wait though.

UniversalFrost · May 9, 2007, 09:37 AM

Yeah, I was kinda looking for 8 weeks of less. I think I will go with a don hume or desantis for now and get a custom made one for later. Unless of course one of the custom holster makers can get me something soon.

Rinspeed · May 9, 2007, 11:12 AM

Although slightly overpriced new I also have a couple Galco holsters that are very nice. I've have good luck buying used holsters too so you might want to take a look at auctionarms, gunbroker or even e-bay for some good buys.

May 1, 2007, 10:29 PM	#1
UniversalFrost Senior Member Join Date: February 20, 2006 Location: Ohio Posts: 2,300	holster makers for sig 239 and mag pouch Yes, I know there are several of the custom holster makers out there on the forum and I am looking for you to let me know what you offer (prices included) for a plain brown leather IWB CCW holster and a matching double mag pouch for a sig p239. I prefer either a metal clip or leather straps with metal snaps. Also, let me know the wait times. I am expecting to place the order sometime this weekend and would like to get it delivered no later than 10 weeks (sooner the better). __________________ Lifetime member VFW and NRA "Quando Omni Flunkus Moritati" (when all else fails play dead) -Red Green

May 2, 2007, 04:17 PM	#3
nemesis Senior Member Join Date: May 18, 2002 Location: Texas, on the border Posts: 846	Probably need to clarify a few details for those custom guys. 1. Horsehide or cowhide? 2. Right hand or left? 3. Tuckable or not tuckable? 4. Is that for 9mm or 357/40? 5. Do you want the holster vertical or with a forward cant/rake? Regarding the double mag carrier.......... 1. Is that for 9mm or 357/40? 2. Do you want conventional OWB or IWB? 3. Do you want your magazines oriented horizontal or vertical? 4. Do you want an open top or flapped closure style? __________________ Packin' Heat Leather Company Galco Distributor & Bianchi Dealer McAllen, Texas USA

May 2, 2007, 10:27 PM	#4
UniversalFrost Senior Member Join Date: February 20, 2006 Location: Ohio Posts: 2,300	I want the normal brown cowhide and a vertical cant or tilted forward cant, right hand, tuckable would be good, but a not tuckable version is just as good. The mag holder and the holster are for the .40 version. Also want open top vertical orientation for the mag holder. would like a tension adjustment for both the mag holder and the holster. I also want IWB for the hoster, but the mag holder can be iwb or owb (iwb prefered). __________________ Lifetime member VFW and NRA "Quando Omni Flunkus Moritati" (when all else fails play dead) -Red Green

May 9, 2007, 09:37 AM	#6
UniversalFrost Senior Member Join Date: February 20, 2006 Location: Ohio Posts: 2,300	Yeah, I was kinda looking for 8 weeks of less. I think I will go with a don hume or desantis for now and get a custom made one for later. Unless of course one of the custom holster makers can get me something soon. __________________ Lifetime member VFW and NRA "Quando Omni Flunkus Moritati" (when all else fails play dead) -Red Green

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

May 2, 2007, 12:09 AM	#2
Travismaine Senior Member Join Date: July 19, 2006 Posts: 147	Call Milt Sparks. I have several of there holsters and have never had a problem I also have two made by Alessi that are of equal quality. Milt Sparks has wait times of up to two months at times.

May 9, 2007, 08:40 AM	#5
Rinspeed Senior Member Join Date: February 1, 2000 Posts: 1,505	The Alessi Talon PLus is an awesome holster for around $60. Only problem is they, as well as Milt Sparks, are very busy. They are worth the wait though.

May 9, 2007, 11:12 AM	#7
Rinspeed Senior Member Join Date: February 1, 2000 Posts: 1,505	Although slightly overpriced new I also have a couple Galco holsters that are very nice. I've have good luck buying used holsters too so you might want to take a look at auctionarms, gunbroker or even e-bay for some good buys.