February 20, 2009, 02:51 PM | #1 |
Member
Join Date: February 10, 2009
Location: State of Ohio
Posts: 99
|
overhaul handgun
So if I am to overhaul a 10-year-old hand gun, what do I need to do?
Replace fire pin, guide-rode-spring?????
__________________
United States Constitution (R) & Bill of Rights (R) Join now! http://gunowners.org/ |
February 20, 2009, 03:33 PM | #2 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
What kind of gun? What is it doing that you think it needs an overhaul? How many rounds have you fired in those years?
Like most mechanical items, you generally replace parts when something indicates new parts are needed, not on some schedule. (Yes, I know, some folks replace springs every ten minutes whether needed or not; I am talking about normal folks.) Jim |
February 20, 2009, 09:47 PM | #3 |
Junior member
Join Date: January 9, 2009
Location: Cuyahoga Falls Ohio - northeast Ohio
Posts: 37
|
Overhaul
I have to agree with Jim, some peaple just like to tinker.
|
February 20, 2009, 10:07 PM | #4 |
Staff
Join Date: March 4, 2005
Location: Ohio
Posts: 21,059
|
I've got a S&W K-22 target revolver with factory-installed McGivern front sight bead that my great aunt bought new in 1936 for $38. I have the original red box and receipt to prove it. In 1960, when I was 9 years old I became the first person ever to fire it. (If I'd understood anything about collector's value then, I never would have). It still shoots great. Nothing has ever been replaced.
In his book, Fast and Fancy Revolver Shooting, Ed McGivern showed before and after groups from that same model weapon when he sent it in for a factory overhaul at something like 200,000 rounds, IIRC. (Maybe it was just 100,000, but the bigger number sticks in my head for some reason; its been awhile since I read that book.) In any event, it illustrates how well a gun can keep going. The low power and soft lead projectiles in the .22 LR won't punish a gun much, so this may well be the best case. Based on Sierra tests, .308 barrels are shot out in 3,000 to 3,500 rounds (CR or SS, respectively). That matches my experience the the M1A. Hotter rounds shoot out even faster, with some of the monsters like the .300 Baer having trouble going much over 1000 rounds. They represent the worst case need for maintenance. When you change a barrel you usually don't have to do anything else, though it is usually the time at which bedding gets looked over or refreshed and dimensions and firing pin protrusion and other gauging is repeated just to be sure all's well.
__________________
Gunsite Orange Hat Family Member CMP Certified GSM Master Instructor NRA Certified Rifle Instructor NRA Benefactor Member and Golden Eagle Last edited by Unclenick; February 20, 2009 at 10:23 PM. |
February 20, 2009, 11:50 PM | #5 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
I have seen a number of people recommend changing the M1911 recoil spring every 1000 rounds, and for a while there seemed to be a contest to decide who changed them more often. Last I heard, the winner was a guy who said they should be changed every 100 rounds. I think he worked for Wolff.
Jim |
February 21, 2009, 01:07 PM | #6 |
Senior Member
Join Date: November 26, 2007
Location: Moses Lake WA
Posts: 395
|
Age should not be used to determine maintenance, use or abuse will govern work need to be done. If concerned change the recoil spring (it is cheep and can not hurt ). Strip the pistol down fully and clean and inspect all parts for ware and base any work to be done on this inspection. Good Luck ---Bill
__________________
The best gun is the one you have when you really need one |
February 21, 2009, 03:01 PM | #7 |
Senior Member
Join Date: May 22, 2007
Location: In the oak studded hills near Napa
Posts: 2,203
|
While regular replacement of mechanical components is very common when it has been demonstrated that "X" number of cycles indicate imminent failure, I don't think that's the case with most gun components.
__________________
grym |
Thread Tools | Search this Thread |
|
|