|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
January 14, 2012, 12:24 AM | #1 |
Senior Member
Join Date: November 12, 2008
Location: Fort Worth, TEXAS
Posts: 909
|
Forster Original Case Trimmer & 45-70
I went ahead and ordered the #4 collet, but it turns out the collet housing is too small to accept the rim on the case.
I went to Forester's website and it seems as if they are aware of the problem. They say the collet housing needs to be drilled out to .610. Would a local, run of the mill machine shop be able to help me out? I really don't want to send the housing back to Forester for reaming, but I am afraid that not every machine shop has a .610 drill. |
January 14, 2012, 12:28 AM | #2 |
Senior Member
Join Date: December 23, 2011
Posts: 153
|
Just call Forester and see if they will not send you a new one.
|
January 14, 2012, 09:40 AM | #3 |
Senior Member
Join Date: October 3, 2005
Location: Vermont
Posts: 288
|
I was just trimming some Remington 45-70 the other day with my Forster and #4 Collet and it worked fine. My trimmer is only about a year old, so my housing may have newer specs. Forster will open up the housing for free if you send it to them.
|
|
|