|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
April 22, 2013, 11:26 AM | #1 |
Senior Member
Join Date: April 28, 2001
Location: CA
Posts: 1,739
|
Reduction in Ruger Quality
I feel like Ruger has cheapened products that made the company great in order to maximize profits and come out with lesser models that stray away from traditional ruger quality. It seems like the current management is so greedy it will cut corners any way possible. We have seen this decline at Remington and now marlin.
Here are some examples: Ruger 10/22 is a classic in all regards. First the stocks went from walnut to birch with plastic parts. Then the finish quality went as annodized gave way to painted receivers and then crinkle paint with rough barrels and plastic trigger guards and parts. I don't particularly care for the ruger extended mag release or the low quality of current 10/22s to buy a new one. I'd prefer a used scratched and dented older one to the current production rifles that now cost a lot more than competing products and give you get a lot less. It used to be that a 10/22 went head to head against Marlin Model 60s by being just a shade higher priced for a lot better gun. When you could get a marlin for $79.99 the Ruger 10/22 cost $99. Now the Marlin cost under $200 and the Ruger over $350. Ruger costs cannot have gone up that much compared to Marlin or Remington. Lets also consider the 77 line. Finely polished rifles that could take customers away from the Winchester Model 70 in the 1990s by selling for a lot less gave way to bead blast rifles and cheap plastic stocks on stainless models. Now we have the Ruger American that goes head to head against Remington 710s and Savage Edge rifles while the lesser finished current 77s prices have been raised dramatically near Winchester Model 70 prices leaving the Howa 1500 as the industry leader for value in the $500 production rifle class. While ruger changed back to polishing 10/22 barrels due to customer demand, they still haven't reversed course by eliminating the use of plastic on their guns or pricing their products so they are affordable to the common man like they did in the past. Ruger once represened an outstanding value for the dollars spent. I don't think that holds so true in today's market. It seems to me that the more ruger has diversified products, the lesser the overall quality of the products coming out of their plant. |
April 22, 2013, 05:40 PM | #2 |
Senior Member
Join Date: January 26, 2008
Location: Madison, AL
Posts: 1,932
|
It seems to me the general gun buyer today looks for a low price and accuracy. I don't think they want to pay for a pretty looking gun, as they know it costs extra for that. IMO, Ruger is transforming their product line into what every one wants. I think Savage started this craze a little while back offering very accurate, but ugly rifles. Remington followed suite loosing their pretty wood and super-smooth bolts.
Based on your comments, it seems to me you put a lot of importance on the finish and easthetics, which could be part of your issues with Ruger. Based on what I've been reading in the past 2-3 years, Ruger seems to be working on their accuracy. 15 years ago when I got into rifles, their generally lower accuracy was what turned me away from them. I certainly don't like plastic parts and don't mind paying for metal ones. But over all, there are many factors that make up a price. Everyone will have to determine what best fits their wants/needs at the price they can afford. Good conversation to discuss, though.. interested in what everyone else has to say. |
April 22, 2013, 05:50 PM | #3 |
Senior Member
Join Date: March 17, 2013
Location: Lenhartsville, PA
Posts: 164
|
Some think of guns as only tools, having to perform well, but not having to look good. Others think of guns as art objects to be adored, but never used lest they be marred. I think of them as both. I like good-looking, good-shooting guns that I can use. I don't worry that one might get scratched any more than I worry about anything I own getting scratched. I'm sure that Rugers aren't as pretty as they used to be every time I look at my old tang safety 77s and No. 1, but I still think they are as good as they ever were.
|
April 22, 2013, 05:56 PM | #4 |
Senior Member
Join Date: November 6, 2011
Location: DFW, Texas
Posts: 876
|
The trend seems to be good function at a reasonable price, looks are secondary. Not just with Ruger but across the board. It doesn't bother me, just makes my old pretty guns worth more.
|
April 22, 2013, 07:56 PM | #5 |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,247
|
Corporations are in business to make a profit by selling products that meet customer demands for quality, features, appearance, etc. Ruger finally made the move towards a round receiver/fat bolt rifle in order to provide "budget conscious" shooters with an alternative to the Savage, Mossberg, Marlin, and Remington lines of budget/entry level rifles at a price that shoppers want to pay. They "cheapened" their rifles by cutting costs to meet a target price that the "budget conscious" buyers would still buy. And now the "budget conscious" buyers are complaining that Rugers no longer have the same features and higher-cost parts and finishes that made them so affordable to the low-budget shoppers. Well, do not despair! Those parts are still available through aftermarket suppliers, as are the high-gloss bluing and walnut stocks.
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
April 22, 2013, 08:05 PM | #6 |
Senior Member
Join Date: September 15, 2007
Posts: 1,707
|
I find in most of the domestically produced rifles of today there is a marked lack of attention to detail.
|
April 22, 2013, 08:38 PM | #7 |
Senior Member
Join Date: October 4, 2008
Location: WI
Posts: 3,656
|
Yes I've also noticed the decline in Rugers quality. I am glad I acquired the newer ones when I did. Now if I get a Ruger its an old used one.
Also those MIM hammers and triggers on their DA revolvers are hideous WTH were they thinking!?
__________________
E-Shock rounds are engineered to expend maximum energy into soft targets, turning the density mass into an expanding rotational cone of NyTrilium matrix particles, causing neurological collapse to the central nervous system.- Yeah I can do that. I guarantee you will know it if a bicyclist hits your house going 1000 mph. -Smaug |
April 22, 2013, 08:50 PM | #8 |
Senior Member
Join Date: April 20, 2009
Location: Helena, AL
Posts: 4,413
|
I have a Remington 700, circa 1980. It has a painted aluminum floor plate. I believe that they have the corner on cheap. How many times have they introduced a cheap rifle after the 788 and failed?
|
April 22, 2013, 09:03 PM | #9 |
Senior Member
Join Date: August 1, 2010
Posts: 641
|
I swore off Rugers about 20 years ago. Never understood why other people thought they were good guns.
|
April 23, 2013, 04:53 AM | #10 |
Senior Member
Join Date: December 14, 2012
Location: Southern Appalachian Mtns
Posts: 1,520
|
IMO the Ruger American is the best "bang for your buck" rifle currently available if you are concerned only about accuracy and function. I haven't bought one yet but many RAR owners have posted threads about them on here praising their accuracy and value. I just wish they would make it in a few more calibers.
As for the model 77, I agree they are overpriced and their quality has slipped lately. I much prefer my old tang safety in 6mm remington And I will also admit that the model 77 has never been as accurate out of the box as a Rem 700, Win 70, or Savage(not counting the axis/edge) I also agree about the 10/22. I have one from the 80's and I much prefer it to a new one. As for their handguns, they are my favorite revolvers by far. I have a stainless Blackhawk that is a 2011 model and it is top notch quality. And they have one of the better 1911s out there IMO.
__________________
DEO VINDICE |
April 23, 2013, 06:14 AM | #11 | |
Senior Member
Join Date: June 15, 2008
Location: Georgia
Posts: 10,786
|
Quote:
In 1992 Ruger finally starting building all their gun parts in house and quality and accuracy has really improved. These are some typical groups from a current production Ruger at 100 and 200 yards, all three groups are under .75 MOA Ruger still offers a walnut stocked 10-22 for those wanting to pay a little more for one. http://ruger.com/products/1022Sporter/models.html And they offer many different versions as well including Target guns, SS/Synhetic and the traditional carbine which I've never cared for. The plastic parts used are a huge improvement over the cast aluminum parts they used to use. I've also noted that new production 10-22's are much more accuarte than older guns. If anything Rugers are getting better, not declining. |
|
April 23, 2013, 08:55 AM | #12 |
Senior Member
Join Date: December 2, 2006
Posts: 122
|
My two current Ruger guns are a second-year-of-production Security Six revolver and a 10-22 Rifle introduced in about 2000 or so as the "Walmart Special" - 22" stainless barrel and birchwood stock. I like the birch, as it is denser and more stable than walnut. I do like a good piece of walnut, but it's no deal breaker. I did refinish it, as I deplore Ruger's proprietary stock finish. Now I can actually see the fairly decent wood grain. Accuracy and reliability are okay, but nothing great. I only bought the Ruger (along with a similar year Marlin 60SB) to compare to my older vintage .22 rifles. Many of the older rifles easily outshoot it and prove more reliable.
Several years back, I lucked into a tang-safety Model 77V in .22-250. Again refinished the stock. It was a very good shooter! At that time I was not handloading, so used Remington factory ammo (okay) and some handloads from a gunshow vendor who had done right by me with a .22 Hornet. His loads were superb in both rifles! Unfortunately, I was not hunting varmints, and needed money more than the rifle, so I sold it. I still mentally kick myself for that. Have tried a Remington in .308Win and a Win70 in .270WSM for deer hunting - neither is as tight shooting as that Ruger was! |
April 23, 2013, 09:08 AM | #13 |
Senior Member
Join Date: March 1, 2009
Location: Midwest
Posts: 1,560
|
Re: Reduction in Ruger Quality
- Ruger are better now than they were before for its intended purposes.
- If there is a market for more expensive, prettier Ruger they would fill that market. - The dollar isn't worth near as much as it used to be so we will get less fit and finish to keep the same or better accuracy. While CNC and designs get better walnut and labor become more expensive. - At least they are not promoting mag bans anymore... |
April 23, 2013, 09:37 AM | #14 |
Senior Member
Join Date: March 30, 2013
Location: Colorado
Posts: 320
|
I shot a Ruger SR9 last weekend I was very unimpressed by the cheap plastic feel of it. I wouldn't pay more then the cost of a Hi-point for it.
|
April 23, 2013, 11:42 AM | #15 |
Senior Member
Join Date: January 30, 2013
Posts: 1,037
|
I have a Ruger M77 chambered in .270 win and the serial # tells me it was built in 2006. The rifle is extremely well built. Solid, WAY more accurate than I expected (stock trigger, factory ammo, cheap 3x9 scope) it'll shoot sub MOA with most decent factory ammo. I had also heard the triggers SUCK on the M77's and while it's no 1200 yard target trigger, it's more than acceptable, for me, and can be easily upgraded if desired.
|
April 23, 2013, 12:10 PM | #16 | ||
Senior Member
Join Date: July 21, 2011
Location: Idaho
Posts: 7,839
|
Quote:
plastic trigger guards? I have no idea what you are talking about there, my 10/22 is fairly recent, about 4 years or so old and it's still got a metal trigger guard and I haven't noticed plastic on any of the 10/22s I've fondled in the stores. yes the painted recievers aren't nearly as nice but everyone has had to cut corners to keep prices low. even Glock and Colt have had to do this, you think Ruger is any different. if things like paint on aluminum bothers you then perhaps you should just stop buying guns because anything like what what you describe in a modern gun runs a great deal of money for a reason. Quote:
you can stop buying rugers if you like. all the more fore me and my fams
__________________
ignore my complete lack of capitalization. I still have no problem correcting your grammar. I never said half the stuff people said I did-Albert Einstein You can't believe everything you read on the internet-Benjamin Franklin |
||
April 23, 2013, 12:18 PM | #17 |
Senior Member
Join Date: February 24, 2012
Location: South Texas
Posts: 2,126
|
I have an old tang safety 6mm and was thinking about getting a new 77 .223. What turned me off was the fact that they are matt blued now, just like most scopes you find these days.
|
April 23, 2013, 12:45 PM | #18 |
Senior Member
Join Date: October 24, 2008
Location: Orange, TX
Posts: 3,078
|
I find the notion that the price a consumer pays for an item is somehow a direct descendant of the cost to manufacture it rather amusing. The manufacturer of a product will (generally) ALWAYS try to obtain the selling price which maximizes profitability. It's an uneasy marriage of anticipated demand and the curve of variable costs. Unit cost does not always descend in a linear fashion with increasing production - and at a certain point actually rises as formerly (more or less) fixed costs spike exponentially when certain production levels are exceeded (ie you have to buy more equipment, build a bigger facility, hire more administrative staff, etc.).
My point? Only that it's a sucker's game to think that you can assume that a product with an average cost of A will necessarily sell for A x some arbitrary factor when sold to the public. Last edited by csmsss; April 23, 2013 at 01:23 PM. |
April 23, 2013, 01:19 PM | #19 |
Senior Member
Join Date: July 18, 2010
Location: Independence Missouri
Posts: 4,582
|
I have no dog in this fight, but I have enjoyed reading some of this bickering back and forth..... To me, the Ruger #1 rifles are my favorite rugers ,then older 77's.... And I really like their " Single Six" line of pistols and Vaquero's also, Blackhawks and Redhawks...
__________________
Keep your Axe sharp and your powder dry. |
April 23, 2013, 06:09 PM | #20 |
Senior Member
Join Date: February 12, 2005
Location: North central Ohio
Posts: 7,486
|
Dollar for dollar, it's my opinion that Ruger firearms are every bit as good or better than their competition. Always have been and still are. I currently have several Ruger handguns, a 10-22 and four Model 77s. All are well-finished, exhibit excellent workmanship, durable, reliable and plenty accurate. No complaints from this long-time, Ruger customer.
__________________
ONLY AN ARMED PEOPLE CAN BE TRULY FREE ; ONLY AN UNARMED PEOPLE CAN EVER BE ENSLAVED ...Aristotle NRA Benefactor Life Member |
April 23, 2013, 06:41 PM | #21 |
Senior Member
Join Date: June 23, 2010
Location: Missouri
Posts: 1,039
|
I have no complaints!
I currently owner a Ruger Mark III 22/45 and a Ruger SP101. I had the use of my brother's Ruger Security Six for many years and cried when he needed it back.
I also owned a Ruger 10/22 (older with Walnut stock and metal trigger and trigger guard). It was a superb shooter from the bench but not so good to me in hunting situations because it didn't fit my frame. Not the guns fault and it always performed flawlessly. Currently I am lusting after the Ruger SR 1911 and if I didn't have 3 very good centerfire rifles already would be purchasing one of the new Ruger Americans. If you don't like their products, DON'T BUY THEM! However I take exception to your complaints about the company and their products. |
April 23, 2013, 06:44 PM | #22 | |
Junior member
Join Date: December 20, 2012
Location: The "Gunshine State"
Posts: 1,981
|
Quote:
You whine about them being affordable to the common man - unless you are still working for minimum wage, their current pricing is affordable to just about everyone, even high school kids working at mickey D's (ammo is another story) In order to maintain a price point that even walmart shoppers can afford, some things had to be made for less. Seems to me that you have no idea about manufacturing costs and expect things to be priced the same even though the governments have raised taxes, insurance, mandated health care, rising costs for raw materials, shipping, utilities, etc.......... |
|
April 23, 2013, 06:46 PM | #23 |
Senior Member
Join Date: December 21, 2005
Posts: 247
|
Shot my new M77 Markll Varmint Target in 6.5 Creedmoor for the first time today, Shot 1/2" @ 100 yards. Haven't shot a rifle in 5 years so I'd say that Ruger is pretty good.
|
April 23, 2013, 07:24 PM | #24 |
Senior Member
Join Date: December 14, 2012
Location: Southern Appalachian Mtns
Posts: 1,520
|
There have been some good points made about differences in new and old Rugers, and some BS thrown in the mix as well. I'll throw in a little more of what I believe to be true. Your feelings may vary...
Ruger has: THE BEST .22 target pistol (Browning Buckmark a close 2nd) THE BEST .22 semiauto rifle platform on which to build THE BEST (arguably) revolvers DA and SA one of the THE BEST 1911s one of THE BEST entry/budget level 9mm handguns - P95 THE BEST single shot rifle within reasonable price THE BEST entry/budget level bolt action rifle - RAR Once again, that is entirely opinion, but if all that can be said about one brand, its doing alright.
__________________
DEO VINDICE |
April 23, 2013, 07:35 PM | #25 |
Senior Member
Join Date: December 10, 2012
Posts: 6,158
|
Rc, I dont know about the 10-22 because both of mine are old. Rugers high end product has not suffered due to introduction of cheaper rifles. If you want high dollar,"high quality" Rugers; they still make them. I am no fan of Ruger's "quality." I have a Ruger 6PPC that will not outshoot my .30-30 lever action. I had a .22-250 that in over 500 rounds of load development never turned in a 5 shot group under 7/8" at 100. I have done everything I can do to the PPC and it just wont shoot. All that is left is a re-barrel. I guess I will do that next.
|
Thread Tools | Search this Thread |
|
|