Mossberg barrel for Remington 870

jb26 · August 10, 2001, 10:32 AM

Does anyone have or use a barrel made by Mossberg for the Remington 870? If so, is it any good. I am mainly looking at the 18.5" plain parkerized barrel. It looks to be quite a bit cheaper than a Remington made one.

http://www.mossberg.com/acatalog/pricebarrels.htm

K80Geoff · August 10, 2001, 12:36 PM

Depends on who Mossberg had make the barrels for them, it might even have been made by Remington! Some Mossberg barrels are made in Mexico.

Shotgun manufacturers often do not have barrel making facilities and farm out the work to companies that strike barrels. This is more common than you might think, particularly amongst european makers.

I am told that there are only four barrel makers in Germany and that the major gun manufacturers make arrangements with these four companies to make their barrels.

Geoff Ross

Jack R-NJ · August 10, 2001, 08:27 PM

Joe... before you buy direct from Mossberg..get ahold of a Cabelas or Bass Pro catalog....last I looked, they had the 18.5's starting at $79.99.....no personal experiance with them but am very temted myself.

3 gun · August 11, 2001, 02:16 PM

Hit the next gun show the rolls around. I picked up a Mossberg 18.5" cyl bore with a bead sight for $30 at a show last year. You can find a lot of good deals if you have time to stop and talk to the vendors.

MiniZ · August 11, 2001, 11:33 PM

My .02...
If you don't need new, check a gunshow or some of the classifieds on the net first. You should be able to find a used Remington barrel on the cheap.

With that said, I don' t see any reason why you shouldn't buy a Mossberg barrel for the Remington, if it is more in line with what you want you spend. Mossberg has been making shotguns for years, and I haven't heard any instances of there barrels blowing up or otherwise failing. If they(or their contractor) can make a good barrel for their product, there isn't any reason they can't make a good barrel for another product.
Zane

August 10, 2001, 10:32 AM	#1
jb26 Senior Member Join Date: October 5, 2000 Location: NE Illinois Posts: 109	Mossberg barrel for Remington 870 Does anyone have or use a barrel made by Mossberg for the Remington 870? If so, is it any good. I am mainly looking at the 18.5" plain parkerized barrel. It looks to be quite a bit cheaper than a Remington made one. http://www.mossberg.com/acatalog/pricebarrels.htm __________________ -Joe The P6 by any other name is just as sweet. -jb26 (in an obscure reference to the sig 225) ex libertatum et iusticia, pax

August 10, 2001, 12:36 PM	#2
K80Geoff Senior Member Join Date: December 20, 1998 Location: NE Pennsylvania Posts: 3,639	Depends on who Mossberg had make the barrels for them, it might even have been made by Remington! Some Mossberg barrels are made in Mexico. Shotgun manufacturers often do not have barrel making facilities and farm out the work to companies that strike barrels. This is more common than you might think, particularly amongst european makers. I am told that there are only four barrel makers in Germany and that the major gun manufacturers make arrangements with these four companies to make their barrels. Geoff Ross __________________ I am no longer a member of this forum. Bye!

August 10, 2001, 08:27 PM	#3
Jack R-NJ Member Join Date: July 20, 2001 Location: Ocean County,NJ Posts: 21	Mossberg barrels for Rem 870 Joe... before you buy direct from Mossberg..get ahold of a Cabelas or Bass Pro catalog....last I looked, they had the 18.5's starting at $79.99.....no personal experiance with them but am very temted myself. __________________ Jack

August 11, 2001, 11:33 PM	#5
MiniZ Senior Member Join Date: February 1, 2001 Location: SLC, UT Posts: 517	My .02... If you don't need new, check a gunshow or some of the classifieds on the net first. You should be able to find a used Remington barrel on the cheap. With that said, I don' t see any reason why you shouldn't buy a Mossberg barrel for the Remington, if it is more in line with what you want you spend. Mossberg has been making shotguns for years, and I haven't heard any instances of there barrels blowing up or otherwise failing. If they(or their contractor) can make a good barrel for their product, there isn't any reason they can't make a good barrel for another product. Zane __________________ Seven- Six- Two Millimeter....FULL METAL JACKET!!!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

August 11, 2001, 02:16 PM	#4
3 gun Senior Member Join Date: December 23, 1999 Location: N41 24.283 W81 43.370 N.E.Ohio Posts: 561	Hit the next gun show the rolls around. I picked up a Mossberg 18.5" cyl bore with a bead sight for $30 at a show last year. You can find a lot of good deals if you have time to stop and talk to the vendors.