November 4, 2011, 05:23 PM | #1 |
Senior Member
Join Date: December 5, 2009
Location: Arkansas
Posts: 431
|
Tyler trigger shoes
Tyler Manufacturing has pulled through like they said they would and received my two trigger shoes today. The shoe for the SP101 won't slide on to the trigger to the full depth of the shoe. I tried alittle spit on it but that didn't help. Before I go taking 600 grit sand paper to one side I thought I'd ask if there is any trick I didn't know about to install it. The screws are set back in shoe so that's not the problem. This shoe is supposed to also fit a J-frame, Rossi and a Taurus 85. So I'm not going to knock it if I have to sand alittle. Any help is always appreciated, Thanks.
Last edited by napg19; November 4, 2011 at 07:33 PM. |
November 5, 2011, 06:11 PM | #2 |
Senior Member
Join Date: December 5, 2009
Location: Arkansas
Posts: 431
|
Alittle sanding on the sides and a perfect fit. These are a big help.
|
November 5, 2011, 06:26 PM | #3 |
Senior Member
Join Date: April 23, 2007
Location: Pennsylvania, USA
Posts: 1,918
|
Good to see that they're back on track.
|
November 9, 2011, 11:38 PM | #4 |
Senior Member
Join Date: August 31, 2009
Location: Greater Northwest
Posts: 244
|
Great to hear they are back! I really, really like their shoes on my target rifles. Thanks for the update.
|
|
|